Studio Experience Projector Premier 30hd User Manual

29
Basic Operation
Menu Bar Items
This list shows the items that can be set in the projector.
„Composite Video/S-Video, DVI Mode
PictureBrightness -50 ~ +50
Contrast -50 ~ +50
Color -64 ~ +64 (DVI hide)
Tint -64 ~ +64 (DVI hide)
SharpnessSoftest, Soft, Normal, Sharp, 
Sharpest
Gamma1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8
Color TempColor Temp 5000k ~ 10000k, 
Native
x         -30 ~ +30
y         -30 ~ +30
Reset this CT
Color TypeStandard/Custom1/Custom2/
Custom3
Target Color (B/C/G/Y/R/M)
Lightness -64 ~ +63...

30
Basic Operation
„PC/Component 1&2 Mode
PictureBrightness -50 ~ +50
Contrast -50 ~ +50
Color -64~+64
(PC Hide)
Tint -64~+64
(PC Hide)
SharpnessSoftest, Soft, Normal, Sharp, 
Sharpest
Gamma1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8
Color TempColor Temp 5000k ~ 10000k, 
Native
x         -30 ~ +30
y         -30 ~ +30
Reset this CT
Color TypeStandard/Custom1/Custom2/
Custom3
Target Color (B/C/G/Y/R/M)
Lightness -64 ~ +63
Saturation -64 ~ 0
Tint -64 ~ +64
Reset (This color)
Reset (All color)
Picture...

31
Basic Operation
Using the Menu Screen
This projector has one set of menu 
screens that allow you to adjust the 
image and various projector settings. 
You can operate the menus from the 
projector or remote control using the 
following procedure.
Menu Selections 
(Adjustments)
1Press  on remote or  on 
keypad.
•  The menu screen is displayed.
 Note
•  The “Picture” menu screen for the 
selected input mode is displayed.
2Press S or T to select the menu 
you want to adjust.
3Press X or  to reach the...

32
Basic Operation
Adjusting the Picture
You can adjust the projectors picture to 
your preferences with the following picture 
settings.
Adjusting Image Preferences
Use this option to adjust the overall brightness of the image. Use this control in conjunction with contrast to 
fine-tune the display. The scale is from -50 to 50.The default setting is 0.
Use this option to adjust the contrast of the image. Use this control in conjunction with contrast to fine-tune 
the display. The scale is from -50 to...

33
Basic Operation
Use this option to adjust the color intensity of the image.
Use this option to adjust the tint of your image. Press X to make the image more green. Press W to make the 
image more purple.
Use this option to adjust the clarity and focus of the image.
Use this option to set the color temperature of the image. Higher color temperatures make the image look 
cool with a bluish hue. Lower color temperature make the image look
  warmer with a reddish hue. The range 
is from 5000°K to...

34
Basic Operation
Use this option to adjust the gamma correction of the image. Default setting is 2.2. Gamma correction 
provides s
even non-linear gamma corrections 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8. 
This function allows you to individually adjust the display characteristics of six colors (R:Red, Y:Yellow, 
G:Green, C:Cyan, B:Blue, M:Magenta).
Gamma
Color Type
Color Type Mode
Select “Color Type” from the picture 
menu on the menu screen,and then 
press Enter.
For operating the menu screen,...

35
Basic Operation
Select “Lightness” from the “Color 
Ty p e
”menu.
Select “Saturation” from the “Color Type” 
menu
.
Select “Tint” from the “Color Type” menu.
Select “Reset (This Color)” or “Reset (All Colors)” from the “Color Type” menu on the 
menu screen.
For operating the menu screen, see page 31.
Lightness
Saturation
Tint
Resetting User-Defined Color Settings
Selected itemDescription
Reset (This color)
“Lightness” 
“Saturation” and 
“Tint” of the color 
selected for “Target” 
are reset.
Reset (All...

36
Basic Operation
Picture setting
This function stores Brightness, Contrast, 
Color, Tint, Sharpness, Gamma, Color Temp, 
Color Type, and White Enhance set in 
“Picture”. Each stored setting is reassigned to 
each input mode. 
Select “Picture Setting” from the “Picture” menu on the menu screen.
For operating the menu screen, see page 31.
 Note
•  When Recalling Saved Contents:
When a saved memory number is selected, 
the contents of the “Picture” menu change 
to the adjustment values of the saved...

37
Basic Operation
Adjusting Computer Images
(Computer Source Signal Only)
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in 
portions of the screen.
When Auto Tune is OFF
When “Auto Tune” is “OFF”, 
interference such as flickering or 
vertical stripes may occur when 
displaying tilings or vertical stripes. 
Should this occur, adjust “Clock” and 
“Phase”, for obtaining an optimum 
image.
Select “Clock”, “Phase”, in the “Fine 
Sync” menu on the menu screen....

38
Basic Operation
NOTES