Studio Experience Projector Premier 50hd User Manual

Chapter 4 –  OSD Menus
 22
OSD M
ENUS
Phase
Phase lets you adjust the focus and clarity of the display. Scale is from 0 to 31.
Position
Position enables you to center the display vertically and horizontally.
Press 

Chapter 4 –  OSD Menus
23
OSD M
ENUS
  
Video System
This option allows you to manually select the video standard for the composite and
S-Video inputs.
 
FLI De-interlacing
This option allows you to control how the projector processes video signals. 
Setting DcDi to on helps to smooth the edges of objects in progressive scan and
interlaced images. 
Setting Film Mode to on optimizes how 3:2 and 2:2 pull down conversions are per-
formed. 
Setting CCS to on helps prevent the cross color contamination that...

Chapter 4 –  OSD Menus
 24
OSD M
ENUS
OSD Position
Enables you to set the position of the
OSD menu. 
Press 

Chapter 4 –  OSD Menus
25
OSD M
ENUS
Status Screen
The status screen displays current system con-
figuration parameters.
Theater Mode
Theater Mode is used to change the brightness
of light in white portions of the image. 
When Bright mode is selected, the white light is
increased 20% more than in normal mode. PC
signal and DVI signal = Bright Mode. Video sig-
nal = Normal Mode
OSD Timeout
Timeout is used to set how long the OSD will stay open if no buttons are pressed. 
Range is from 5 to 100 seconds....

Chapter 4 –  OSD Menus
 26
OSD M
ENUS
Geometry
The Geometry menu lets you configure the hori-
zontal and vertical keystone and projection
placement settings.
H-V Keystone
This option enables you to set the horizontal
and vertical keystone values.
The vertical and horizontal options are as fol-
lows:
• Vertical: -7 ~ 7 (±14°)
• Horizontal: -20 ~ 20 (±40°) 

Chapter 4 –  OSD Menus
27
OSD M
ENUS
Projection
Enables you to configure the projector for
reversed image setup and ceiling mounting.
The following options are available:
• Front Tabletop: normal image, used for
forward facing projection.
• Front Ceiling: Image inverted vertically.
Used for forward-facing, ceiling-mounted
projection.
• Rear Tabletop: Image reversed horizontally. This is used for rear projection.
• Rear Ceiling: Image inverted vertically and reversed horizontally. This is used
for rear...

Chapter 4 –  OSD Menus
 28
OSD M
ENUS
Language
This menu sets the OSD display language.
The following languages are available:
• English
•Spanish
•German
•French
• Italian
Factory Default
This item sets all menu and submenu items to their factory defaults.
This concludes this chapter. Virtual Wide
• Resolution 1280 x 720 
• Correct geometry in middle
(stretches edges of image)
Anamorphic
• Resolution 1280 x720
• 4:3 input is stretched to fit 16:9
display
• Stretches entire image.
Pixel to Pixel
Maintains...

S
PECIFICATIONS
Appendix A
Specifications
Product Specifications 
Item Description 
Model No.  Premiere 50HD DLP Projector
Display  Single DMD Panel with five-speed six-segment color 
wheel
Panel Size  0.8-inch 
Display Type  Single Panel HD2 DMD Chip by Texas Instruments 
Resolution  1280 x 720 dots 
Lens  Manual Zoom & Focus, 
Zoom ratio: 1:1.2, F/2.4. f=24-28.8 mm 
Lamp  200 W VIP, life = 2,000 hours 
Brightness  1000 ANSI Lumen – Bright Mode 
800 ANSI Lumen – Normal Mode 
Contrast Ratio  1700:1 or...

M
AINTENANCE
Appendix B
Maintenance
Maintenance
The Premiere 50HD DLP Projector has been constructed to provide years of opera-
tion. Refer to the following sections to maintain and troubleshoot your projector.
Lamp Maintenance
The projector lamp has an average life of 2,000 hours. Maintain proper ventilation
and keep the air filter clean to keep the lamp operating throughout its lifetime. Do not
subject the projector to unnecessary vibration to excessive vibration or shock may
rupture the lamp....

Appendix B –  Maintenance
31
M
AINTENANCE
Checking the Lamp Usage Time
The projector lamp has the average life of 2,000 hours. The OSD menus provide you
with a utility to monitor the lamp usage time.
1. Press Menu on the control panel or remote control.
2. Select Advanced.
3. In the Advanced submenu, select Status Screen.
4. The Status Screen displays the number of hours the lamp has been lit.
When the lamp usage time reaches 2,000 hours, it is time to replace the lamp.
Select 
Advanced
Select
Status...