ThermovisionFLIR FCSeries Installation Manual

427-0073-12-12 Version 110 June 2014 3-21
3Advanced Configuration
Alarm Actions:  Just as there can be many 
sources of alarms, there are also a variety of 
responses or actions to these alarms. Some of 
the alarm actions are only used with pan/tilt 
cameras. Actions such as Point, Load ScanList, 
Go To Preset, and Engage Radar Track would 
only be used with a pan/tilt camera and are not 
used with the FC-Series fixed camera. For the 
FC-Series, typically a rule will be configured to 
Send a...

427-0073-12-12 Version 110 June 2014 3-22
3Advanced Configuration
Video Analytics Alarm to Email:  Shown at the 
right is an example of an alarm rule that causes an 
email notification (including a snapshot image) to 
be sent when a motion alarm occurs in VA Area 0 
or 1 (refer to 
Creating Motion Detection Areas, pg. 
3-5).
The Alarm Source Device Type is set to Video 
Analytics with Alarm Id 0,1 corresponding to VA 
Areas 0 and 1.
The Action, Send Notification, references the 
Default Notification List...

427-0073-12-12 Version 110 June 2014 3-23
3Advanced Configuration
3.2.2Files Menu
The admin actions for transferring files are accessed 
through the Files menu on the left side of the page. 
Selected actions from the Configuration and Media 
Browser are described below. 
Use the Configuration page to see the Nexus 
Configuration File, perform Backup & Recovery of local 
files (on the camera), and perform Upload & Download 
of configuration files to another computer for backup, or 
to install a new...

427-0073-12-12 Version 110 June 2014 3-24
3Advanced Configuration
Media Browser:  The Media Browser page shows all of the images captured by the camera as a 
result of an alarm action. The image files can be downloaded to another computer for backup. 
After selecting a file, the file will appear in the 
Preview window.
The file name contains the year, month, day, 24 
hour clock time, and the sensor that captured 
the image. In this case IR0 is the only sensor.
Select Download to download the selected...

427-0073-12-12 Version 110 June 2014 3-25
3Advanced Configuration
3.2.3 Product Info Menu
The admin functions accessed through the Product Info menu on the 
left side of the page are shown. Selected actions from the Config File 
page are described below. 
Use the Config File page to change the Friendly Name which 
appears in FSM by default. You can also include the Friendly Name on 
the video feeds and adjust its appearance on the OSD page (refer to 
On Screen Display (OSD), pg. 3-18). 
Click on the...

427-0073-12-12 Version 110 June 2014 3-26
3Advanced Configuration
3.3 Restoring the Factory Settings
The camera comes configured from the factory with a default IP address (192.168.250.116), the login 
passwords (user, expert, fliradmin), and all of the other configuration parameters (stored in a file 
called server.ini). In some cases, it may be necessary to restore the network settings of the camera to 
the original factory settings. If necessary, the camera IP address can be restored to this factory...