ThermovisionFLIR PTZ35x140 MS Installation and Operation Manual

							427-0011-00-10 Revision 140     Copyright © FLIR Systems, Inc.   41 
MIL-C-26482 Series 1 
Shell Size  18 
Insert Arrangement  32 
Finish  Olive drab chromate over cadmium 
Contacts Pines 
Shell Style  Cable plug 
Insert Position  Keyring 
 
Break-Out Connector Cable  
The PTZ-35x140™ also includes a break-out cable that connects to the system interface cable 
with single terminal connectors. The break-out cable has the MIL-C-26482 Series 1 Connector 
on one end and 4 pig-tail connectors and power leads as follows: 
 
 
Figure 8-5: Break-Out Connector Cable 
1. Four terminal ring leads for power: Input voltage range: 24 VDC ±10 % or 24 VAC ±10 % 
rms (50/60Hz). Nominal static power consumption is 
						

							427-0011-00-10 Revision 140     Copyright © FLIR Systems, Inc.   42 
9.0   DOCUMENT HISTORY 
 
Revision Date Comments 
100  Jan 2007  Initial Release 
110  Aug 2007  Minor additions and corrections 
120  Nov 2008  Added information regarding SR model, changed overall format to 
match other Security cameras 
130  Dec 2010  Corrected serial cable pin out labels; corrected EAR level to level 
1; added clarification of location of ground lug 
Added WEEE label and information 
140  Aug 2011  Added Ethernet pinouts to system cable 
Corrected DB-9 pin numbering in Section 3.8 Serial Control 
Added FCC Regulatory information 
Removed references to Nexus Console software 
Added information regarding installation and use of FSM 
 
  
						

							427-0011-00-10 Revision 140     Copyright © FLIR Systems, Inc.   43 
10.0 USER CONTROLS FOR KBD300A      
  
  
  
  
Keystrokes  Function  Toggle Values (default to first value)
 
Near button  Focus Near    
Far button  Focus Far    
CW Joystick  Zoom In   Increments from Wide to Tele  
CCW Joystick  Zoom Out   Increments from Tele to Wide  
1, Aux On IR Polarity to Black 
Hot   
1, Aux Off IR Polarity to White 
Hot   
2, Aux On  Set DLTV as active 
For both commands and video  
2, Aux Off  Set IR as active  For both commands and video 
3, Aux On Toggle:  Plateau 
Values  
3, Aux Off  Toggle: AGC Type   
4, Aux On  Autofocus 
One shot Autofocus  
4, Aux Off  IR FFC  Internal calibration 
5, Aux Off  Toggle: LUT Palette  White, Black  
6, Aux On  Toggle: DDE Gain  Dynamic Detail Enhancement 
6, Aux Off  Toggle: AGC ROI  Full, Horizon, Sky, Ground, Center 
7, Aux Off Toggle: Max Gain 
Values  
Note: the appropriate camera must be active to use associated camera functions. 
To start, enter the Pelco Address then press CAM