Timex Analog Chronograph User Manual

TO USE CHRONOGRAPH FOR LAP OR SPLIT
TIME MEASUREMENT:
1)   PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or “CH SPL” will appear.
2)   PRESS pusher “D” to select LAP or SPLIT.
3)   PRESS pusher “C” to start timing.
4)   PRESS pusher “C” to record the first Lap or Split time; digits will be frozen for 15 seconds; “L” or
“S” will flash to indicate that the next Lap or Split
time is being recorded in the background.
5)   PRESS pusher “A” to view the running display while the display is frozen....

NOTE:
1)   While in setting of any mode, if no pusher ispressed for 90 seconds the display will automati
cally return to TIME \f CALENDAR mode.
2)   While in any mode other than TIME \f CALENDAR mode, whenever pusher “C” or “D” is pressed, the
next press of pusher “A” will automatically return
the display to TIME \f CALENDAR mode.
17
E N G L I S H
TO SET DUAL TIME:1)   PRESS pusher “A” to bring up DUAL TIME 
display. “T2” will appear
beside the dual time.
2)   PRESS and HOLD pusher “D”; “Hold” will...

TO SET THE TIME1)   Pull crown all the way out and turn to correcttime. 
2)   Push crown in to restart. 
Note:  24hour display will set automatically.
TO SET THE DATEInstant date change: 
1)   Pull crown out one stop and turn CLOCKWISE 
(if not, COUNTERCLOCKWISE) until you reach 
correct date. 
2)   Push crown in to restart.
19
E N G L I S H
MULTIFUNCTION MODELS
Your watch has a normal large face display and three
small faces displaying date, day and 24hour time.
TO SET THE DAY1)   Pull crown all the way...

NOTE:Remember to set time for am or pm (sun or
moon).
TO SET DATE:1)   PULL out crown to “B” position.
2)   TURN crown clockwise to correct date.
3)   PUSH in crown to “A” position
TO SET DAY:1)   PULL out crown to “C” position.
2)   Advance time 24 hours to change the day.
3)   PUSH in crown to “A” position
21
E N G L I S H
DAY\bDATE\bAM\bPM\b
SUN\bMOON MODELS
TO SET TIME:1)   PULL out crown to “C” position.
2)   TURN crown clockwise to correct time. Day\fam\fpm\fmoon will also change.
3)   Push in...

•    The seconds sweep hand shows “seconds
elapsed” for chronograph
TIME, CALENDAR, CHRONOGRAPH This chronograph watch has three functions:TIME
TO SET THE TIME:
1)   PULL out Crown to “C” position
2)   TURN Crown either way to correct time
3)   PUSH in Crown to “A” position
CALENDAR
TO SET THE CALENDAR
1)   PULL out Crown to “B” position
2)   TURN Crown clockwise to correct position
3)   PUSH in Crown to “A” position
23
E N G L I S H
CHRONOGRAPH MODELSReview all chronographs to determine your watch...

NOTE: PRESSING and HOLDING either pusher “A” or
“B” will cause the hands to move continually until the
pusher is released.
STANDARD CHRONOGRAPH 
MEASUREMENT:
1)   PRESS pusher “A” to start timing
2)   PRESS pusher “A” to stop timing
3)   PRESS pusher “B” to reset
25
E N G L I S H
CHRONOGRAPH•     The Chronograph is capable of measuring:
•     Minutes elapsed up to 1 hour (12 o’clock eye)
•     Hour elapsed up to 12 hours (9 o’clock eye)
•     Seconds elapsed up to 1 minute (seconds sweep
hand)
BEFORE...

SETTING THE DATE1)   PULL the crown out to the 1st position “B”.
2)   Turn the crown counterclockwise to set the date.*If the date is set between the hours of around
9:00 PM and 1:00 AM, the date may not change
on the following day.
3)   After the date has been set, push the crown back to the normal position “A”.
USING THE CHRONOGRAPHThis chronograph is able to measure and display 
time in 1\f1 second up to maximum of 11 hours 
59  minutes 59 seconds. The chronograph second
hand keeps continuously for 11...

*Do not push crown to normal position while the
chronograph second hand returns to zero position.
It stops on the way when crown is returned to 
normal position and its position is recognized as 
zero position.
29
E N G L I S H
minute hand, and chronograph hour hand return
to zero position.
CHRONOGRAPH RESET 
(INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the
chronograph second hand does not return to zero
position after the chronograph has been reset,
including after the battery...

TIME
TO SET THE TIME:
1.   PULL crown out to “C” position.
2.   TURN crown either way to correct time.
3.   PUSH crown in to “A” position.
TO ADJUST TO A NEW TIME ZONE:1.   PULL crown out to “B” position.
2.   TURN crown either way to move the hour hand inhour increments.
CALENDAR
TO SET THE CALENDAR:
1.   PULL crown out to “B” position.
2.   TURN crown either way to move hour hand. Twocomplete revolutions relative to the 12 o’clock
position will move the date forward or  backward.
This will correct both...

TO ADJUST CHRONOGRAPH HANDS:1.   PULL crown out to “B” position.
2.   PRESS pusher “B” until the hand at the 10 o’clockeye resets to the “30” position.
3.   PULL crown out to “C” position.
4.   PRESS pusher “A” until the chronograph second hand resets to the “0” or “60” or 12hour position.
5.   PRESS pusher “B” until the hand at the 2 o’clock eye resets to the “0”  position.
6.   PUSH in Crown to “A” position.
NOTE:
•     Make sure the chronograph is stopped and reset
before adjusting.
•     PRESSING and...