Toshiba Bex4t2g Manual

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094 1.4 Accessories
 
E1- 2 
1.4  Accessories 
   
                                     
When unpacking the printer, please make sure all th e following 
accessories are supplied with the printer.  
 
   Power cord  
 
 
       
Safety precautions   Quick  installation  manual
 
 
       
 
    
    CD-ROM(1pc.)  

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094 1.5 Appearance
 
E1- 3 
1.5  Appearance   
1.5.1  Dimensions         
1.5.2  Front View              
1.5.3  Rear View
 
   
The names of the parts or units introduced in this  section are used 
in the following chapters. 
                                   
  
278 (10.9) 460 (18.1) 
  
Dimensions in mm (inches) 
310 (12.2) 
Top Cover 
Media Outlet  Supply Window 
LCD Message Display 
Operation Panel 
Reserved for Serial or  
WLAN Interface 
LAN Interface 
AC...

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094 1.5 Appearance
 
E1- 4 
1.5.4  Operation Panel                
1.5.5  Interior                         
Please  see 
Section  3  for  further  information  about  the  Operation 
Panel.       
1.6  Options 
LCD 
ERROR LED 
PAUSE 
RESTART 
UP 
RIGHT 
ENTER 
DOWN 
CANCEL 
MODE 
LEFT 
FEED 
ONLINE LED 
Print Head 
Platen 
Head Lever 
Ribbon Shaft 
Print Head Block 
Paper Guide R    

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094 1.6 Options
 
E1- 5 
   
         
Option Name  Type  Description 
Disc cutter module  B-EX204-QM-R  Disc cutter  
Each time media is cut, the media feed is  
stopped. 
Strip module  B-EX904-H-QM-R  This allows use of on-d
emand (peel-off) 
operation or to take-up labels and backing  
paper together when using the rewind guide  
plate. To purchase the strip module, please  
inquire with your local distributor. 
RFID module mount  
kit  B-EX700-RFID-H1-QM-
R...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  2. PRINTER SETUP 
 
E2- 1 
2.  PRINTER SETUP 
This section outlines the procedures to setup your  printer prior to its operation.  The section includes precautions, 
loading media and ribbon, connecting cables, settin g the operating environment of the printer and performing an 
online print test.       
Reference Procedure Setup Flow 
After referring to the Safety Precautions in this 
manual, install the printer in a safe and stable  
location. 
Connect a...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  2.1 Installation 
 
E2- 2 
2.1  Installation 
    To insure the best operating environment and to ass
ure the safety of the 
operator and equipment, please observe the followin g precautions. 
   Operate the printer on a stable, level surface in a  location free from 
excessive humidity, high temperature, dust, vibrati on and direct 
sunlight. 
   Keep your work environment static free.  Static dis charge can cause 
damage to delicate internal components. 
...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  2.2 Connecting the Power Cord
 
E2- 3 
 
2.2  Connecting the  Power Cord 
 1.   Make sure that the printer Power Switch is in the  OFF () position. 
  Connect the Power Cord to the printer as shown in  the figure below. 
                
2.   Plug the other end of the Power Cord into a ground ed outlet as shown 
in the figure below. 
            
  [Example of US Type]  [Example of EU Type]
 
 
CAUTION! 
1.  Make sure that the printer  Power Switch is turned to...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  2.3 Loading Supplies
 
E2- 4 
2.3  Loading Supplies                                        
1.  Do not touch any moving parts.  To reduce the ri
sk of fingers, jewellery, clothing, etc., being 
drawn into the moving parts, be sure to load the me dia once the printer has stopped moving 
completely.   
2.  The Print Head becomes hot immediately after pri nting, allow it to cool before loading the media. 
3.  To avoid injury, be careful not to trap your fin gers...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.3 Loading Supplies
 
E2- 5 
2.3.1  Loading the Media  
               
 
 
 
 
 
 
 
 
 
 
 The following procedure shows the steps to properly load the media into 
the printer so that it feeds straight through the printer. 
 
The printer prints both labels and tags. 
1.  Open the Top Cover. 
2.  Turn the Head Lever to the FREE position and release the Ribbon 
Shaft Holder Plate.  
3.  Open the Print Head Block.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4. 
Move...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.3 Loading Supplies
 
E2- 6 
2.3.1  Loading the Media 
(Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
8. Place the media between the Media Guides and adjust them to the 
media width.  Once in the correct position tighten the Locking 
Screw. 
9. Check that the media’s path through the printer is straight. The 
media should be to the left side of the print head 
 
 
 
 
 
 
 
 
 
 
 
 
 
 NOTE: 
Do not over-tighten the Locking 
Ring of the Supply Holder....