Toshiba C50b User Guide

3. Lay the disc, label side up, in the disc tray.Figure 4-3 Inserting a disc1. Laser lensWhen the disc tray is fully opened, the edge of the computer will cover the
disc tray slightly. Therefore, you will need to turn the disc at an angle whenyou place it in the disc tray. After seating the disc, however, make sure itlies flat.Do not touch the laser lens or any portion of its surrounding casing as
this could cause misalignment.
Prevent foreign objects from entering the drive. Check the surface of
the...

When the disc tray pops open slightly, wait a moment to make sure the
disc has stopped spinning before pulling the disc tray fully open.
2. The disc extends slightly over the sides of the disc tray so you can grasp it. Gently lift out the disc.
3. Push the center of the disc tray to close it. Press gently until it locks into place.
How to remove disc when the disc tray will not open
Pressing the eject button will not open the disc tray when the computerpower is off. If the power is off, you can open the...

Writing discsTOSHIBA Disc Creator is provided as writing software with this computer.
This utility can be used to write data.
You can use the DVD Super Multi drive to write data to either CD-R, CD-
RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW or
DVD-RAM discs.When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live electrical outlet. It
is possible that, if data is written while powered by the battery pack, the write process may...

CD-R:
TAIYO YUDEN CO., Ltd.
MITSUBISHI KAGAKU MEDIA CO., LTD.CD-RW: (Multi-Speed, High-Speed and Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD.DVD-R:
DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media)
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)
Hitachi Maxell, Ltd. (for 8x and 16x speed media)DVD-R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)DVD+R:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed...

When writing or rewriting
Please observe the following points while you write or rewrite data to a
media:
Always copy data from the hard disk drive to the optical media - do not
use the cut-and-paste function as the original data will be lost if there
is a write error.
Do not perform any of the following actions:
Change users in the Operating Systems.
Operate the computer for any other function, including such tasks as using a mouse or Touch Pad, or closing/opening the display
panel.
Start a...

You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R,DVD-R DL or DVD-RW media using the "Disc Backup" function of TOSHIBA Disc Creator.
You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R,
DVD+R DL or DVD+RW media using the "Disc Backup" function of TOSHIBA Disc Creator.
You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL or DVD+RW to CD-R or CD-RW mediausing the "Disc Backup" function of TOSHIBA Disc Creator.
TOSHIBA Disc Creator cannot record in...

5. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator
information.
3D Playback on an External 3D Device 3D playback on an external 3D device feature is only provided with somemodels.
Effect of 3D can be shown only on an external 3D devices connected via an HDMI output. It cannot be shown on the internal display. In order for 3D
playback to work on external display/TV, you need a 3D enabled display/ TV that has an HDCP...

Real Time Clock (RTC) function
The Real Time Clock (RTC) function is supported. The main batteryprovides power for the internal real time clock and calendar function and also maintains the system configuration while the computer is turned off. Ifthe RTC lasting time completely runs out, the system will lose this
information and the real time clock and calendar will stop working.
You can change the Real Time Clock settings in the BIOS setup utility. Please refer to  Troubleshooting  for further...

Please be aware that the charging time when the computer is on is affected
by ambient temperature, the temperature of the computer and how you are using the computer - if you make heavy use of external devices forexample, the battery might scarcely charge at all during operation.
Battery charging notice
The battery may not begin charging immediately under the followingconditions:
The battery is extremely hot or cold (if the battery is extremely hot, it
might not charge at all). To ensure the battery...

With repeated discharges and recharges, the battery's capacity will
gradually decrease. In view of this it will be noted that an often used,
older battery will not operate for as long as a new battery even when
both are fully charged.
Maximizing battery operating time
A battery's usefulness depends on how long it can supply power on asingle charge, while how long the charge lasts in a battery depends on:
Processor speed
Screen brightness
System Sleep Mode
System Hibernation Mode
Display power off...