Toshiba D-r400 Manual

31 EN31 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
PLAYING THE DISCS IN OTHER DVD PLAYERS
  
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
“General Setting” menu will appear.
2
 Use [K / L] to select “Recording”, 
then press [ENTER].
“Recording” menu will appear.
3
 Use [K / L] to select “Auto Finalize”, 
then press [ENTER].
4
 Use [K / L] to select “Disc Full” or 
“End of Timer Rec”, then press...

32 EN32 EN
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
“DVD Menu“ will appear.
3
 Use [K / L] to select “Finalize”, then 
press [ENTER].
4
 Use [K / L] to select “Yes”, then press 
[ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All PlaylistFinalize disc?
Ye s
No
Finalizing will start.
Finalizing 90%
This operation may take 
awhile to be completed.
5
  Finalizing is completed....

33 EN33 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
PLAYING THE DISCS IN OTHER DVD PLAYERS
To cancel finalizing...
(DVD-RW only)
Press [STOP C] during the finalizing is in progress. Use 
[K / L] to select “Yes”, then press [ENTER]. Finalizing is 
canceled and the unit switches to stop mode.
Finalizing 5%
Do you want to cancel ?Ye s
No
If “” appears when [STOP C] is pressed, you cannot 
cancel finalizing because the finalizing has already...

34 EN34 EN
INFORMATION ON DVD RECORDING
You can select a recording mode among 5 options, and 
the recording time will depend on the recording mode 
you select as follows.
Recording modeRecording time
Video/
Sound Quality
12cm 8cm
XP60 min 18 min
SP120 min 36 min
LP240 min 72 min
EP360 min 108 min
SLP480 min 144 min
•  The recording times listed above are estimates and are 
for reference purposes only. Actual recording times may 
vary.
•  The audio and video quality of content being recorded 
may differ...

35 EN35 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
1
 Press [I/yy ON/STANDBY].
Turn on the TV and be sure to select the input to 
which the unit is connected.
2
 Press [OPEN/CLOSE A] to open the 
disc tray and insert your disc with its 
label facing up.
Align the disc to 
the disc tray guide.
3
 Press [OPEN/CLOSE A] to close the 
disc tray.
It may take awhile to load 
the disc completely.
•  When...

36 EN36 EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
7
 Press [STOP C] to stop recording.
The recorded title will be included in the title list. 
(Refer to “Guide to a Title List” on page 68.)
Wait for a moment  90%
This operation may take 
awhile to be completed.
6
 Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
   I
Press [PAUSE F] to pause recording. 
Press [PAUSE F]] or [REC I] again to restart 
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set...

37 EN37 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
TIMER RECORDING
1
  Press [TIMER PROG.].
2
 Use [K / L] to select “New Program”, 
then press [ENTER].
Timer Programming
1/1 MON JAN/01 10:00AM
   Date  Start  End  L1/L2
 New Program
•  If there are 6 or more programs, use 
[SKIP H / G] to change pages. You can program the unit to record up to 12 programs 
within a month in advance. Daily or weekly program 
recordings are also available....

38 EN38 EN
3
 Use [K / L] to enter the date, then 
press [B].
Timer Programming
1/1 MON JAN/01 10:00AM
   Date  Start  End  L1/L2
 New ProgramDate
JAN/02
L1/L2Mode
SP
SP 2 : 00
Start
- - : - -End
- - : - -
L1
Daily
MON-SATJAN/01
JAN/31 MON-FRI
SAT
FRI
SUN
4
 Use [K / L / { / B] or [the Number 
buttons] to enter the start and end 
time, then press [B].
1/1
 New ProgramDate
JAN/02
L1/L2Mode
SP
SP 2 : 00
Start
12 : 00AMEnd
- - : - -
L1
5
 Use [K / L] to select the appropriate 
external input position...

39 EN39 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
Checking, canceling, or correcting the timer 
programming informationIf the timer program did not complete correctly, 
the error number appears in the timer pro-
gramming list.
1) Press [I/y ON/STANDBY].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming
1/1 MON JAN/01 10:00AM SP  (1:00) JAN/  2/07  12:00 AM       L1       SP
   Date  Start  End...

40 EN40 EN
TIMER RECORDING
Hints for Timer Recording
PROG. A
PROG. B
actual
recordingPROG. A
PROG. B
When the starting time is the same:
A program set previously (PROG. A) has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording PROG. A
PROG. APROG. CPROG. B
PROG. C
When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B...