Toshiba D-vr4su User Manual

Introduction
21 Connections with the TV or audio component
Connect to a stereo amplifier with audio output
You can enjoy high quality audio by connecting the audio output to your amplifier.
Connect the audio output jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using...

22
Introduction
Auto clock setting / Setting the video channel
NOTES:
•When shipped from factory, the
video channel is set to CH 3.
•If the unit does not operate prop-
erly, or there is no key operation
from the unit and/or the remote
control: Static electricity, etc., may
affect the operation. Disconnect
the AC power cord once, then con-
nect it again.
Auto clock setting
Preparation:
You must connect the antenna or cable before connecting the AC cord
to the power source.
After the antenna or cable is...

23
Various settings
Setup Menu
The Setup Menu consists of several menus where
you can make various settings concerning lan-
guage, audio functions and images. In addition, this
menu includes a clock, channel and other menus
that require setting just after purchase.
For details of each menu, see the corresponding
section in this chapter.
Using the Setup Menu
The following example shows the basic setting proce-
dure of the Setup Menu.
1Press SETUP while the DVD or video tape is
stopped.
The Easy Menu...

Various settings
24General Settings
Preparation:
•  Turn ON the TV and set it to the video input mode.
•  Select “GENERAL” from “Setup Menu”. For the pro-
cedure, see steps 1 to 3 in “Using the Setup Menu”
on page 23.3Enter the current password. The new password
entry box appears.
4Enter new password. The new password verify box
appears.
5Enter new password again to verify.
To delete the password you set for the
parental control level
1Press  or  to select “Password” and press
ENTER.
2Press  or  to...

25
Various settings
3If you wish to cancel the set rating level temporarily,
select “yes” with 
or, then press ENTER. If the
password has been selected, the password input
screen will appear.
Alternatively, if the password has not been set, play-
back will commence. If you don’t know (or have for-
gotten) the password, select “stop”.
Then press OPEN/CLOSE to remove the disc.
4Use the numeric keys to input the password.
•To interrupt the input process, press RETURN.
5Playback will commence if the entered...

Various settings
26General Settings / Setting the Video
This section describes video settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “VIDEO” from “Setup Menu”. For the proce-
dure, see steps 1 to 3 in “Using the Setup Menu” on
page 23.
TV ScreenDisplayLine1 InputLine2 InputE.B.L
SETUPSelect
EndEnter Back
ENTERRETURN
4:3 Pan&Scan
4:3 LetterBox
16:9VIDEO
TV Screen
You can select the TV screen size to suit the screen
image.
Select “TV Screen” and select screen size from...

27
Various settings
Setting the Video / Setting the Audio
Line1 Input/Line2 Input
This unit comes with an S-Video input jack and Video
input jack. When you use an S-Video or Video input jack,
you must select the input mode.
Select “Line1 Input” (“Line2 Input”) and select the mode
from the below.
S-Video
The video signal is input from the S-Video input jack
priority.
Video
The video signal is input only from the Video input jack.
E.B.L
To select the black level of playback pictures, set your
preference...

Various settings
28Setting the Language
You can choose the language of the menu screen,
DVD menu, DVD audio and subtitles.
Preparation:
•  Turn ON the TV and set it to the video input mode.
•  Select “LANGUAGE” from “Setup Menu”. For the
procedure, see steps 1 to 3 in “Using the Setup Menu”
on page 23.
OSD LanguageDVD MenuAudioSubtitle
SelectEnter Back
ENTERRETURN
English
Français
EspañolLANGUAGE
SETUPEnd
Audio
When several audio languages are recorded on a DVD,
you can select the audio language to be...

29
Various settings
Setting the Record / Setting the Disc
This section describes recording settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “RECORD” from “Setup Menu”. For the
procedure, see steps 1 to 3 in “Using the Setup Menu”
on page 23.
Auto ChapterBlack Level(REC)
SelectEnter Back
ENTERRETURN
Off
10min
15min
30minRECORD
SETUPEnd
Auto Chapter
You can automatically make chapter marks on the DVD
to be recorded.
Select “Auto Chapter” and select the interval between...

Various settings
30
Select “Undo Finalize”, and the screen below will ap-
pear.
Undo Finalize
OK to proceed?
Yes No
•When you select “Yes” and press ENTER, the can-
celling finalization will start. The screen below will
appear.
Unfinalizing...
Please  wait.
3 %
•  When you select “No” and press ENTER, the DISC
screen will appear.
NOTES:
•When cancelling finalization is finished. “Undo final-
izing completed. Press ENTER.” will appear. Press
ENTER to return to the DISC screen.
•The cancelling finalization...