Toshiba D-vr600ku Manual

							21
Various settings
Setting the language
You can choose the language of the menu screen,
DVD menu, DVD audio and subtitles.
Preparation:
•  Turn ON the TV and set it to the video input mode.
•  Select “Language” from “General”. For the proce-
dure, see steps 1 to 3 in “Using the SETUP MENU”
on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
Other
OSD
DVD Menu
DVD Audio
DVD Subtitle
DivX(R) SubtitleEnglish
English
English
Auto
English
Press RETURN to exitLanguage
OSD
You can set the language for on screen display.
Select “OSD” and select the language from below.
Selectable languages:
English, Spanish, French
DVD Menu
When several menu languages are recorded on a DVD,
you can select the language to be used for the DVD
menu.
Select “DVD Menu” and select the language from below.
Selectable languages:
English, Spanish, French
The selected language is the first priority menu lan-
guage.
DVD Audio
When several audio languages are recorded on a DVD,
you can select the audio language to be played back.
The selected language remains in effect after the power
is turned off or the disc is replaced.
Select “DVD Audio” and select the audio language from
below.
Selectable languages:
English, Spanish, French
The language you have selected will play if it is re-
corded on the disc.
NOTE:
If the selected language is not recorded on the disc, the
first priority language is selected.
DVD Subtitle
When several subtitles languages are recorded on DVD,
you can select the language to be used for the subtitles.
The selected language remains in effect after the power
is turned off or the disc is replaced.
Select “DVD Subtitle” and select the menu language
from the below.
Selectable languages:
English, Spanish, French
The subtitle is displayed with the selected language if
it is recorded on the disc.
Auto
•The unit will automatically select the same language
in the DVD Audio setting.
•When the unit selects the same language as the
DVD Audio setting, the subtitles will not appear dur-
ing playback.
•When you do not use the same language as the
DVD Audio setting, the subtitles will appear during
playback.
Off
Subtitles do not appear.
NOTE:
If the selected language is not recorded on the disc, the
first priority language is selected.
DivX(R) Subtitle
When several DivX® subtitles languages are recorded
on DivX® file, you can select the language to be used
for the subtitles. The selected language remains in ef-
fect after the power is turned off or the disc is replaced.
Select “DivX(R) Subtitle” and select the menu language
from the below.
Selectable languages:
Czech,  Dutch,  English,  French,  German,
Hungarian,  Italian,  Polish,  Spanish,  Swedish
 2K70101A_E P20-2808`02`07, 20:43 21 
						

							Various settings
22
Setting the parental control
Some discs are specified as not suitable for chil-
dren. This unit can prevent playback of such discs.
Preparation:
•  Turn ON the TV and set it to the video input mode.
•  Select “Rating” from “General”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
Other
Password
DVD
Change Password8.Adult
Proceed
Press RETURN to exitRating
Input the initial password
1Select “Password”. Press “0000” using numeric
buttons. (Please note, this is pre-setting password
of this unit.)
• If you input a wrong number, press CANCEL.
2Then you can change the parental control level.
Selecting parental control
1Select “DVD” and the parental control level from
below.
1. Kid Safe:
2. G:
3. PG:
4. PG13:
5. PG R:
6. R:
7. NC17R:
8. Adult:
Select from level 1 to level 8.
On a scale of 1- 8, “1” is the most restrictive.
2Press ENTER.
Setting the new password
1Select “Change Password”. Then press ENTER.
2Use the numeric buttons to input old password.
3Input the new password.
• Be sure to remember this number!
4Input the new password again to confirm.
5Select “OK”, then press ENTER.
NOTES:
•  The selected level will apply to operations executed
after this.
•The unit cannot restrict playback of some discs.
•  Some discs may not be encoded with specific rating
level information though its disc jacket says “adult”.
Parental control will not work with those discs.
•If you forget your password, open the disc tray; if there
is a disc inside then remove it and close the tray. To
reset the password, press and hold number 7 on the
remote control, then press and hold STOP on the front
panel at the same time until the On-Screen Display
shows “Parental Unlock Completed”. Now the pass-
word has been returned to the initial value (“0000”).
Temporarily cancelling parental control
Parental control can temporarily be canceled with some
DVDs.
1Playback a DVD. (See page 29.)
2If the DVD disc has been designed to temporarily
cancel the rating level, the screen that follows the
loading screen will change. If you select “Yes” with
ENTER, the below screen will appear.
Temporary parental level changed.
Do you want to continue?
Parental lock
Ye s N o
3If you wish to cancel the set rating level temporarily,
select “Yes”, then press ENTER.
•If you don’t know (or have forgotten) the pass-
word, select “No” and then press ENTER. The set-
ting screen will disappear. Press OPEN/CLOSE
to remove the disc.
4Use the numeric buttons to input the password
and then press ENTER.
5Select “Yes”, then press ENTER.
6Playback will commence if the entered password
was correct.
NOTE:
This temporary cancellation of the rating level will re-
main active until the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically. Adult discs and general discs (R-rated
discs included) cannot be played back.
Adult discs and R-rated discs cannot
be played back.
Adult discs cannot be played back.
(Level 4 to 7 discs contain content chil-
dren age 15 and younger may not see.)
Virtually all discs can be played back
without restriction.
 2K70101A_E P20-2808`02`07, 20:43 22 
						

							23
Various settings
Setting the clock / Setting the disc
You can manually set the date, year and present time
with the remote control.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Clock” from “General”. For the procedure, see
steps 1 to 3 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
Other
Clock Settings
Date Settings12 : 00 AM
01 / 01 / 07
Press RETURN to exitClock
Clock Settings
1Select “Clock Settings” and press ENTER.
2Press or to select hour, minute and AM/PM.
12 : 00 AM
3Press  or  to set the value of the selected item.
10 : 00 AM
4Repeat steps 2 and 3 to set the hour, minute and
AM/PM.
Then press ENTER.
Date Settings
1Select “Date Settings” and press ENTER.
2Press or to select month, date and year.
01 / 01 / 07
3Press  or  to set the value of the selected item.
4Repeat steps 2 and 3 to set the month, date and
year.
Then press ENTER.This section describes disc setting.
Preparation:
•  Turn ON the TV and set it to the video input mode.
•  Select “Disc” from “General”. For the procedure, see
steps 1 to 3 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
OtherFormat
New Disc Format
Finalize
Make compatible
Protect Disc
Physical Format
Format    
You can format a recorded DVD-RAM/-RW/+RW.
Check the content of the disc before format. If you format
the disc, the recorded content of the disc will be erased.
1Select “Format”, then press ENTER.
In case of DVD-RW: The screen below will appear.
Press 
or to select “VR” or “Video” mode, then
press ENTER.
Select the format mode.
Press RETURN to exitDisc SetupVR Video
In case of DVD-RAM, DVD+RW: Go to step 2.
2The Disc Erase Notification will appear.Disc Erase Notification
Ye s N o
Erase the disc?
Warning: all Information on disc will 
be lost.
•When you select “Yes” and press ENTER, format
will start. The screen below will appear.
Formatting
45%
•When you select “No” and press ENTER, format
will be canceled.
NOTES:
•You cannot format Ver. 1.0 DVD-RW and DVD-R.
•You cannot format a disc if the disc is protected.
In such a case, be sure to cancel the disc protection
(see “Protect Disc” on page 25) before format.
 2K70101A_E P20-2808`02`07, 20:43 23 
						

							Various settings
24
Unfinalize   
You can cancel the finalization of a finalized DVD-RW
(in VR mode or Video mode) and DVD+RW.
You cannot cancel the finalization for discs other than
above. You can record or edit on a disc whose finaliza-
tion has been canceled.
Select “Unfinalize”, and the screen below will appear.
Do you want to unfinalize this disc?Disc Finalize Notification
Ye s N o
¥When you select ÒYesÓ and press ENTER, unfinalizing
will start. The screen below will appear.
Processing...
Please wait.
•  When you select “No” and press ENTER, unfinalizing.
NOTES:
•The unfinalizing process may require a few minutes
to about 1 hour according to disc type or the amount
of free space on the disc.
•When the disc’s finalization cannot be canceled, you
cannot select “Unfinalize”.
•When unfinalized disc inserted, this menu will change
to “Finalize”. See “Finalize”.
Make compatible  
To play a DVD+RW disc recorded on this unit, the disc
needs this procedure to insure compatibility with other
DVD players.
When “Make compatible” is selected, the screen below
will appear.
Do you want make disc compatible?
Make compatible
Ye s N o
¥When you select ÒYesÓ and press ENTER, Make com-
patible will start. The screen below will appear.
Making disc compatible
•When you select “No” and press ENTER, Make com-
patible will be canceled.
•If you eject the disc without making disc compatible,
the screen below will appear. Press ENTER to make
the disc compatible.
Do you want make disc compatible?
Make compatible
Press ENTER to make changes permanent.
Press OPEN/CLOSE to open tray.
¥When making disc compatible is finished, the title
menu of the disc will appear on the screen then after
the disc will be ejected automatically.
¥If you do not need to make disc compatible, press
OPEN/CLOSE to eject the disc.
NOTES:
•Even if you make a disc compatible, the disc cannot
be played back in some DVD players.
•When you eject DVD+R disc, Make compatible
screen also will appear. If you select Yes and press
ENTER, making the disc compatible will start on the
DVD+R disc. But you cannot record or edit DVD+R
disc after making disc compatible.
Setting the disc (continued)
New Disc Format 
 
If you insert an unused DVD-RW disc, the disc is auto-
matically formatted.
If you use DVD-RW (Ver.1.1/1.2), you can select the
mode to be used for automatic format.
Select “New Disc Format” and select the mode from the
list below.
Video:Format the disc in the Video mode.
VR:Format the disc in the VR mode.
When you insert an unused disc, the following message
screen will appear.
Disc Erase Notification
Ye s N o
Disc is not recognized or it is new disc.
Do you want to erase and prepare the disc
for recording?
Warning: all information on disc will
be lost.
•  When you select “Yes” and press ENTER, format will
start. The screen below will appear.
Formatting
45%
•  When you select “No” and press ENTER, format will
be canceled.
NOTE:
If a recorded disc has scratches or contamination on it,
the “New Disc Format” screen may appear.
If this happens, select “No” and press ENTER.
Finalize    
To play a DVD-RW/R or DVD+R disc recorded on this
unit, you must finalize the disc to insure compatibility
with other DVD players.
When “Finalize” is selected, the screen below will appear.
Do you want to finalize this disc?Disc Finalize Notification
Ye s N o
•When you select “Yes” and press ENTER, finalization
will start. The screen below will appear.
Processing...
Please wait.
•When you select “No” and press ENTER, finalize will
be canceled.
NOTES:
•The finalization process may require a few minutes to
about 1 hour  according to disc type or the amount of
free space on the disc.
•You can record or edit a finalized DVD-RW (in VR
mode) by cancelling the finalizing, but you cannot do
these operations with a DVD-RW (Video mode), or
with a DVD-R or with a DVD+R.
•Even if you finalize a disc in the Video mode, the disc
cannot be played back in some DVD players.
•A DVD-R or DVD+R disc cannot be named after it is
finalized.
•When finalized disc inserted, this menu will change
to “Unfinalize”. See “Unfinalize”.
 2K70101A_E P20-282/9/07, 12:34 PM 24 
						

							25
Various settings
Setting the disc (continued) / DivX(R) Video On Demand / Restore / Setting other item
Restore
This action will restore the factory defaults.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Restore” from “General”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
Other
This action will restore
the factory defaults. Are
you sure you want to
continue?
Press RETURN to exitRestore
Ye s N o
•When you select “Yes” and press ENTER, all the set-
tings will return to the factory setting (except Clock
settings, Date settings, DVD rating and Password).
•When you select “No” and press ENTER, Restore will
be canceled.
NOTE:
When you execute “Restore”, the timer recording set-
ting will be cleared.
Display/Call
You can turn off the screen display that is output to the
TV screen by this unit. Select “Display/Call” and “On” or
“Off ”.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Other” from “General”. For the procedure, see
steps 1 to 3 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
Other
Display/Call
On
Press RETURN to exitOther
On:The screen display appears.
Off:Nothing but the SETUP MENU and error mes-
sages appear.
Protect Disc  
You can protect a disc to prevent the content recorded
on it from being erased, edited or re-recorded.
Only DVD-RAM and DVD-RW (in VR mode) can be pro-
tected.
Select “Protect Disc” and press ENTER to protect the
disc. SETUP menu will disappear automatically when
Protect Disc is finished.
NOTE:
When protected disc is inserted, this menu will change
to “Unprotect Disc”. Select “Unprotect Disc” and press
ENTER when you release the protection of the disc.
Physical Format 
Physically formats a DVD-RAM disc. Whenever you use
a new disc for the first time, be sure to format it.
NOTE:
The physical format process may require about 1 hour
according to disc condition.
This section describes DivX® Video On Demand.
DivX(R)
This unit is designed and manufactured to support the
DivX® VOD (Video On Demand) DRM (Digital Rights
Management). You can display the registration code of
DivX
® VOD.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “DivX(R)” from “General”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Language
Rating
Clock
 
Disc
DivX(R)
Restore
OtherDivX(R) Video On Demand
Your registration code is:
T352GRZC
To learn more visit 
www.divx.com/vod
Done
 2K70101A_E P20-2808`02`07, 20:43 25 
						

							Various settings
26
Setting the A/V Output
This section describes screen settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Video” from “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
 
Audio
TV Shape
Still Mode4:3 Letter Box
Automatic
Press RETURN to exitVideo
TV Shape
You can select the TV screen size to suit the screen
image.
Select “TV Shape” and screen size from below.
4:3 Letter Box
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it
displays a wide picture with black bands at the top
and bottom of screen.
4:3 Pan Scan
It displays a wide picture across the whole screen with
left and right edges automatically cut off.
16:9
Select this mode when connecting to a wide-screen
TV. A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the pan scan format,
it displays a 4:3 aspect ratio.
Still Mode
You can set the type of image displayed on the TV screen
when the playback of the DVD is stilled.
Select “Still Mode” and the image to be displayed from
below.
Still by Frame
The frame still is set.
Automatic
The field still or frame still is automatically selected.
(For normal use.)
Note for the field still and frame still:
(with 480i interlaced scanning mode)
•Field* still (240 lines)
Since only one field (half of the video information) is
shown on the TV screen, the picture appears rough
but does not shake.
•Frame* still (480 lines)
Two fields are alternatively shown on the TV screen.
The picture shakes but the resulting picture quality is
superior to the field still pictures.Field*: A field refers to the video information in one-
half of a frame.  1 frame (screen) consists of 2
fields.
Frame*: A frame refers to the total area occupied by
each picture on the TV screen.
This section describes image quality settings.
Preparation:
•  Turn ON the TV and set it to the video input mode.
•Select “Picture” in “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
 
Audio
Brightness
E.B.L.STD
Off
Press RETURN to exitPicture
Brightness
You can control the brightness level of the image.
Select “Brightness” and the level from below.
MIN:The image becomes darker.
STD:The image is of standard brightness.
MAX:The image becomes brighter.
E.B.L.
To select the black level of playback pictures, set your
preference and monitor’s ability.
On:Enhanced grey scale (0 IRE cut off)
Off:Standard grey scale (7.5 IRE cut off)
This section describes audio settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Audio” from “A/V Output”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU” on page
20.
General
A/V Output
Timer REC
Recording
Other
Video
Picture
 
Audio
DRC
Digital Output Mode
Virtual Surround
External Audio InputSTD
PCM
Off
Stereo
Press RETURN to exitAudio
 2K70101A_E P20-2808`02`07, 20:43 26 
						

							27
Various settings
Setting the A/V Output (continued) / Recording
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Select “DRC” and the level from below.
TV:Dynamic range is reduced.
STD:Full dynamic range is reduced.
MAX:Full dynamic range is maintained.
NOTES:
•This function works only during playback of Dolby Digi-
tal recorded discs.
•When you listen to the sound from TV’s speaker, it is
recommended to select “TV”.
•The level of Dynamic Range Reduction may differ
depending on the DVD.
Digital Output Mode
Select from the following methods of outputting the au-
dio of discs that were recorded with Dolby Digital.
Bitstream:Outputs in Dolby Digital sound.
PCM:Converts the sound to PCM and outputs
it.
NOTE:
Select PCM if you are connected to an audio amplifier
and the amplifier is not Dolby Digital compatible.
Virtual Surround (QSound)
Sound that is not recorded in the surround mode will be
changed to artificial surround sound and output.
Select “Virtual Surround” and “On” to activate the virtual
surround function. Select “Off ” to cancel the virtual sur-
round function.
Manufactured under license from
QSound Labs, Inc. U.S. patent Nos.
5,105,462, 5,208,860 and 5,440,638
and various foreign counterpart.
Copyright QSound Labs, Inc.
1998-2002. QSound
® is a trademark of
QSound Labs, Inc. All rights reserved.
NOTES:
•This function does not work with a video tape.
•The “QSound” works only when the DVD disc recorded
with Dolby Digital is played back.
•When this function works, the volume might change.
•When the voice is distorted, turn off QSound.
External Audio Input
The audio mode for the audio input jack can be selected,
choosing either stereo or monaural.
Select “External Audio Input” and audio input from be-
low.
Stereo:The sound is treated as stereo sound.
L CH:The sound is treated as the monaural sound
of the left channel.
R CH:The sound is treated as the monaural sound
of the right channel.
This section describes recording settings.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Recording”. For the procedure, see steps 1
to 2 in “Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
Auto Chapter
Index Picture
Black Level10 min. 
0 sec. 
Standard
Press RETURN to exitRecording
Auto Chapter
You can automatically make chapter marks on the DVD
to be recorded.
Select “Auto Chapter” and the interval between chapter
marks from below.
Off:The automatic chapter is not used.
5 min.:The interval is set to 5 minutes.
10 min.:The interval is set to 10 minutes.
15 min.:The interval is set to 15 minutes.
Index Picture  
You can set the time that the thumbnail picture is regis-
tered in the title menu of DVD-RAM or DVD-RW (VR
mode).
Select “Index Picture” and registered recording point from
below.
0 sec.:The picture of a recording at 0 second start
point is registered.
1 min.:The picture of a recording at 1 minute start
point will be registered.
3 min.:The picture of a recording at 3 minutes start
point will be registered.
NOTES:
•You cannot select the thumbnail picture for DVD-RW
(Video mode), DVD-R, DVD+RW or DVD+R.
•You can also change the thumbnail picture after re-
cording. See “Selecting thumbnail picture” on page
60.
Black Level
You can set the black level when you record.
Standard:Records at the level of the input
source.
Enhanced:Lowers the level 7.5IRE and records.
The unauthorized recording, use, distribution, or re-
vision of television programs, videotapes, DVDs and
other materials, is prohibited under the Copyright
Laws of the United States and other countries, and
may subject you to civil and/or criminal liability.
 2K70101A_E P20-2808`02`07, 20:43 27 
						

							Various settings
28
You can set the switching interval between played
back images in the slide show mode.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “Other”. For the procedure, see steps 1 to 2 in
“Using the SETUP MENU” on page 20.
General
A/V Output
Timer REC
Recording
Other
JPEG Interval
Off
Press RETURN to exitOther
JPEG Interval 
You can select the interval time for JPEG slide show
(see page 42).
Select “JPEG Interval” and the switching interval be-
tween images from below.
Off:The slide show mode is not used.
5 sec.:The interval is set to 5 seconds.
10 sec.:The interval is set to 10 seconds.
15 sec.:The interval is set to 15 seconds.
NOTE:
It may have a longer interval due to a size of data.
Other
 2K70101A_E P20-2808`02`07, 20:43 28 
						

							Disc playback
29
Disc playback
Playback procedure
Preparation:
•Turn ON the TV and set to the video input mode.
•Press DVD to select the DVD mode. (The DVD indicator will light.)
NOTE:It is impossible to switch to the VCR mode while DVD is
played back.
1Press OPEN/CLOSE.
The disc tray will open.
2Place a disc onto the disc tray.
Hold the disc, position it with the
printed label side up, align it with the
guide and place it in its proper posi-
tion.
3Press OPEN/CLOSE to close the
disc tray.
“
” appears on the screen and
the disc start playback automati-
cally.
•A menu screen may appear on
the TV screen if the disc has a
menu feature. In this case, press 
, , ,  or ENTER to
operate a menu feature.
4Press PLAY to start playback.
5Press STOP to end playback.
•The DVD/VCR memorizes the stopped point, depending on
the disc. “
” appears on the screen for approx. 4 seconds.
“” keeps blinking in the display window until the playback is
stopped completely. Press PLAY to resume playback (from the
scene point).
•If you press STOP again (“ 
 ” appears on the screen), the DVD/
VCR will clear the stopped point.
6Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press ON/STANDBY.
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
•If a non-compatible disc is loaded,
“Incorrect disc”, “Wrong region” or
“Wrong Rating” will appear on the
TV screen according to the type of
loaded disc. In this case, check your
disc again (See pages 9 and 22).
•Some discs may take a minute or
so to start playback.
•A prohibition symbol “
” may ap-
pear at the upper right of the screen.
This symbol means either the fea-
ture you tried is not available on the
disc, or the DVD/VCR cannot access
the feature at this time. This does
not indicate a problem with the DVD/
VCR.
•When you set a single-faced disc la-
bel downwards (i.e. the wrong way
up) and press PLAY or OPEN/
CLOSE, “
” will appear and then
it will change to “”.
•Some playback operations of DVDs
may be intentionally fixed by soft-
ware producers. Since this DVD/
VCR plays DVDs according to the
disc contents the software produc-
ers designed, some playback fea-
tures may not be available. Also re-
fer to the instructions supplied with
the DVDs.
•When playing DTS-encoded Audio
CDs, excessive noise will be heard
from the analog stereo outputs. To
avoid possible damage to the audio
system, the consumer should take
proper precautions when the ana-
log stereo outputs of the DVD/VCR
are connected to an amplification
system.
 2K70101A_E P29-3608`02`07, 20:43 29 
						

							Disc playback
30Playback by selecting a title
When playing back a recorded disc,
you can display the Title List and
select the title to be played back.
NOTE:
When a disc that has been recorded
in the Video mode is finalized, the Title
List is automatically changed that can
be played back even with other DVD
players. The recording information will
not appear in the Title List after final-
izing or “Make Compatible”.
4 Total TitlesNo Label
Title 1
Title 2
Title 3
Title 4
45% Free Space
Preparation:
•Turn ON the TV and set to the video input mode.
•Load a recorded DVD.
•Press DVD to select the DVD mode. (The DVD indicator will light.)
1Press TITLE MENU.
The Title List will appear.
Title List
Rename
Line 1
Feb 2, 2007-4:30 PMNo Label
Title:I  Rec Mode: XPRemain: 55m  XP
Total: 4 titles
Line 1 (S)
Feb 13, 2007-12:00 PM
Line 2
Mar 1, 2007-8:30 AM
Line 2 (S)
Mar 16, 2007-3:00 PM
Play
01:00:28 / 02:07:58
Titles
Control
menuThumbnail pictureRecording information*Title information Preview window
(with elapsed total time of the title)
Disc name
The first title will be highlighted.
*The remain time changes depending on the recording mode that
has been selected now.
2Press  or  to select the title you want to playback.
•You can check the recorded title by motion picture in the preview
window.
3Press PLAY. Or press / to select  in the control menu,
then press ENTER.
The selected title is played back.
NOTES:
•If you do not display the Title List and press PLAY, the first title is
played back.
•The Title List is used not only for playing back titles but also for edit-
ing various discs and titles. For details of editing operation, see page
56.
•You cannot switch to the VCR mode when the Title List is showing.
Press TITLE MENU to clear the Title List, then press VCR to switch
to the VCR mode.
•While displaying the Title List, SETUP MENU cannot be displayed.
To clear the Title List, press TITLE MENU or RETURN, or select 
from the control menu using  or  then press ENTER.
 2K70101A_E P29-3608`02`07, 20:43 30