Toshiba Dvr4xsu Owners Manual

Editing the disc
76Editing an original title
In VR mode, you can edit various
items, whereas in Video mode, you
can edit the title names only.Preparation:•  Turn ON the TV and set to the video input mode.
•  Load the recorded disc.
•  Press DVD to select the DVD mode. (The DVD indicator will light.)
Set Index PictureYou can set the time that the thumbnail image is registered in the title
menu of DVD-RAM/RW (VR mode).
1Press TITLE MENU to display the ORG Title List.
2Select the original title where a...

Dubbing
80
Preparation:• Turn ON the TV and set to the video input mode.
• Load a source disc and a video tape for recording.
• Confirm the remaining tape for recording before operation.
1Press VCR to set this unit to VCR mode.
The VCR indicator will light.
2Press REC MODE/SPEED and select the recording mode.
• When REC MODE/SPEED is pressed each time, “SP” or “SLP”
is selected.
• The recording mode is indicated on both the TV screen and the
display window.
• For the details of the recording mode, see...

Additional  information
84
Enter the appropriate code number for the initial settings “DVD Menu”, “Audio” and/or “Subtitle” (see page 28).
Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese   2919
Afar 1111 Finnish 1619 Lithuanian 2230 Slovak   2921
Afrikaans 1116 French 1628 Macedonian 2321 Slovenian   2922
Albanian 2927 Frisian 1635 Malagasy2317 Somali   2925
Amharic 1123 Galician 1722 Malay2329 Spanish   1529
Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese   2931
Armenian 1835 German 1415 Maltese...

88
GENERAL
Power supply:
Power consumption:
Weight:
Dimensions:
Operating temperature:
Operating humidity:
Inputs/Outputs:
Video:
Audio:
Antenna:
VCR section
Video head:
Audio track:
Tu n e r :
RF channel output:
F.FWD/REW Time:
Hi-Fi frequency response:
Hi-Fi dynamic range:
DVD section
Signal system:
Applicable disc:
Recording format:
Recording discs:
Recording time:
(based on a 4.7GB disc)
Audio characteristics
frequency response:
S/N Ratio:
Harmonic distortion:
Wow and flutter:
Dynamic range:
Output:...

A1-1 D-VR4XSU/D-VR4XSC
CAUTION
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE-
FULLY AND RETAIN FOR FUTURE REFERENCE.  SHOULD THE UNIT REQUIRE MAINTENANCE,
CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE...

A1-2 D-VR4XSU/D-VR4XSC
IMPORTANT SERVICE SAFETY INFORMATION
Safety precautions to be followed during servicing:
1.
2.Parts marked with an 
 are critical parts for safety. Replace only with the one described in the parts
list.
Before returning the DVD product to the customer, make the appropriate leakage current check or
resistance measurements to ensure that exposed parts are properly insulated from the supply circuit.
A leakage current check is recommended for this unit. Plug the AC line cord directly...

A1-3 D-VR4XSU/D-VR4XSC
IMPORTANT SAFEGUARDS
1.
2.
3.
4.
5.
6.
7.
8.
8A.
9.
10.
11.
12.
13.
14.
15.
16.READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
CLEANING
Unplug this unit from the...

A1-4 D-VR4XSU/D-VR4XSC
IMPORTANT SAFEGUARDS(CONTINUED)
OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding...

A1-5 D-VR4XSU/D-VR4XSC EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)ANTENNA LEAD
IN WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H) GROUND
CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
IMPORTANT SAFEGUARDS(CONTINUED) 

A1-6 D-VR4XSU/D-VR4XSC
TAPE REMOVAL METHOD AT NO POWER SUPPLY
Fig. 1
Fig. 2 Remove the Top Cabinet, Front Cabinet and DVD Block. (Refer to item 1 of the
DISASSEMBLY INSTRUCTIONS.)
Remove the screw 1 of the Deck Chassis and remove the Loading Motor. (Refer to Fig. 2)
Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
Rotate the Clutch Assy either derection to wind the Video Tape in the Cassette Case.
Repeat steps 3~4. Then take out the Video Cassette from the Deck...