Toshiba Estudio 162 Owners Manual

MULTIFUNCTIONAL DIGITAL SYSTEMS

	
	


	
		
	
File No. SME04003200
R04112171700-TTEC
Ver00_2005-01 

© 2005 TOSHIBA TEC CORPORATIONAll rights reserved
Parts marked with “” are important for maintaining the safely of the machine. Be sure to\
 replace these
parts with the replacement parts specified to maintain the safety and pe\
rformance of the machine. 

• Be sure to use a dedicated outlet with AC 110A, 115V or 127V/8A, 220V-240V or 240V/5A for its
power source.
 The machine must be grounded for safety.
Never ground it to a gas pipe or a water pipe.
 Select a suitable place for installation.
Avoid excessive heat, high humidity, dust, vibration and direct sunlight.
 Also provide proper ventilation as the machine emits a slight amount of ozone.
 The socket-outlet shall be installed near the machine and shall be easily accessible.
2. Service of...

3. Main Service Parts for Safety
 The breaker, door switch, fuse, thermostat, thermofuse, thermistor, etc. are particularly important for
safety. Be sure to handle/install them properly. If these parts are shorted circuit and/or made their
functions out, they may burn down, for instance, and may result in fatal accidents. Do not allow a
short circuit to occur. Do not use the parts not recommended by Toshiba TEC Corporation.
4. Cautionary Labels
 During servicing, be sure to check the rating plate and...

 CAUTION  
This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved
on the eye’s retina, there is the danger of spot damage to the retina.
The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of
servicing.
1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a
unit, not as individual parts.
2) Do not look into the machine with the main switch turned on after...

At the production line, the output power
of the scanner unit is adjusted to 0.57
MILLI-WATT PLUS 20 PCTS and is
maintained constant by the operation of
the Automatic Power Control (APC).
Even if the APC circuit fails in operation
for some reason, the maximum output
power will only be 15 MILLI-WATT 0.1
MICRO-SEC. Giving and accessible
emission level of 42 MICRO-WATT
which is still-less than the limit of
CLASS-1 laser product.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA
KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA...

CONTENTS
[1] GENERAL1. Major functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
2. Note for servicing and handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[2] SPECIFICATIONS1. Basic Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
2. Operation specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
3. Copy performance. . . . . . . . . . . . . . . . ....

e-STUDIO162/162D/151/151D GENERAL  1 - 1
[1] GENERAL
1. Major functions
Configurations
Descriptions of items
CPM: Copy speed (Copies Per Minute)
SB/MB: SB = Manual feed single bypass, MB = Manual feed multi bypass
2 tray: Second cassette unit (MY-1026)
ADF: Original feed unit (MR-2016)
R-ADF: Duplex original feed unit (MR-3017)
Color scanner: Color scanner function
GDI printer: GDI printer function with USB
SPLC:SPLC printer function
E-SORT:Electrical sort
Duplex: Auto duplex copy function
Shifter: Job...

e-STUDIO162/162D/151/151D SPECIFICATIONS  2 - 1
[2] SPECIFICATIONS
1. Basic Specifications
2. Operation specifications
Item
Type Desktop
Copy system Dry, electrostatic
Segment (class) Digital personal copier
Copier dimensions 20.4(W) x 19.8(D) x 11.7(H) (518mm(W) x 503mm(D) x 296mm(H))
Weight (Approximately)  e-STUDIO162/151 Approx. 36.6lbs.  (16.6kg) 
e-STUDIO162D/151DApprox. 37.1lbs. (16.8kg)
Section, item Details
Paper feed 
section Paper feed system 1 tray (250 sheets) + multi bypass (50 sheets)
AB...

e-STUDIO162/162D/151/151D SPECIFICATIONS  2 - 2 *1) May fluctuate due to environmental conditions and the input voltage.
3. Copy performance
∗ADF/RADF: Optional
Duplex: e-STUDIO162D/151D Fusing section Fusing system Heat roller system
Upper heat roller type Teflon roller
Lower heat roller type Silicon rubber roller
Heater lamp type Halogen lamp
Voltage 230V
Power consumption 800W
Electrical section Power source Voltage Local voltage
Frequency 50/60Hz
Rated current 8A
Power consumption Max. Less than...