Toshiba Ikwb16aw Manual

41
Create self-signed certificate manually
1. Select this option.
2. Click Create to open the Create Certificate page, then click  Save to generate the certificate.
3.  The  Certificate  Information  will  automatically  be  displayed  in  the  third  column  as  shown  below.  You  can click Property to see detailed information about the certificate.
Create  certificate  and  install : Select  this  option  if  you  want  to  create  a  certificate  from  a  certificate 
authority. 
1. Select this...

42
3. If you see the following Information bar, click OK and click on the Information bar at the top of the page to allow pop-ups.
4. The pop-up window shows an example of a certificate request. 

43
5.  Look  for  a  trusted  certificate  authority  that  issues  digital  certificates.  Enroll  the  Network  Camera. Wait  for  the  certificate  authority  to  issue  a  SSL  certificate;  click  Browse...  to  search  for  the  issued 
certificate, then click Upload in the second column.
● How do I cancel the HTTPS settings?
1. Uncheck Enable HTTPS secure connection  in the first column and click Save; a warning dialog 
    will pop up. 2. Click OK  to disable HTTPS.
3. The webpage will redirect...

44
SNMP (Simple Network Management Protocol) Advanced Mode
This  section  explains  how  to  use  the  SNMP  on  the  network  camera.  The  Simple  Network 
Management  Protocol  is  an  application  layer  protocol  that  facilitates  the  exchange  of 
management  information  between  network  devices.  It  helps  network  administrators  to  remotely 
manage network devices and find, solve network problems with ease. 
■ The SNMP consists of the following three key components: 
1. Manager:...

45
Network
This section explains how to configure a wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is intended 
to  be  accessed  by  local  computers.  The  default  setting  for  the  Network  Type  is  LAN.  Rememer  to  click 
Save when you complete the Network setting.
Get  IP  address  automatically:  Select  this  option  to  obtain  an  available  dynamic  IP  address  assigned  by 
the...

46
Enable  UPnP  port  forwarding:  To  access  the  Network  Camera  from  the  Internet,  select  this  option  to 
allow  the  Network  Camera  to  open  ports  on  the  router  automatically  so  that  video  streams  can  be  sent 
out from a LAN. To utilize of this feature, make sure that your router supports UPnP
TM and it is activated.
PPPoE (Point-to-point over Ethernet)
Select  this  option  to  configure  your  Network  Camera  to  make  it  accessible  from  anywhere  as  long  as 
there  is...

47
● Steps to enable the UPnPTM user interface on your computer:
Note  that  you  must  log  on  to  the  computer  as  a  system  administrator  to  install  the  UPnPTM 
components.
    1. Go to Start, click  Control Panel, then click Add or Remove Programs.
      2. In the Add or Remove Programs dialog box, click  Add/Remove Windows Components.
    3. In the Windows Components Wizard dialog box, select Networking Services  and click Details.
     

48
    4. In the Networking Services dialog box, select Universal Plug and Play and click OK.   
    
    5. Click  Next in the following window.
    6. Click  Finish. UPnP
TM is enabled.
● How does UPnPTM work?
UPnPTM networking technology provides automatic IP configuration and dynamic discovery of devices 
added to a network. Services and capabilities offered by networked devices, such as printing and file  sharing,  are  available  among  each  other  without  the  need  for  cumbersome  network...

49
Enable IPv6
Select this option and click Save to enable IPv6 settings. 
Please note that this only works if your network environment and hardware equipment support IPv6. The 
browser should be Microsoft
® Internet Explorer 6.5 or above.
When  IPv6  is  enabled,  by  default,  the  network  camera  will  listen  to  router  advertisements  and  be 
assigned with a link-local IPv6 address accordingly. 
IPv6 Information: Click this button to obtain the IPv6 information as sh\
own below.
If your IPv6...

50
Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar o\
f your web browser.
3. The format should be:
    
4. Press Enter on the keyboard or click Refresh button to refresh the webpage.
    For example: 
● If you have a Secondary HTTP port (the default value is 8080), you can also link to the webpage in\
 
     the following address format: (Please refer to HTTP  on page 54 for detailed information.)
●...