Toshiba Projector Tdp B1 Quickstart Manual

							009-0482-00
*009-0482-00*
*009-0482-00**009-0482-00* *009-0482-00* 
						

							Still need help?
Remember, your TDP-B1 User’s Guide includes comprehensive instructions on setting 
up and operating your TDP-B1.
1 Nothing appears on the screen.
Make sure you have plugged in the power cable, removed the lens cap, and 
pressed the lamp on/off button on the keypad.
2All I see is the startup screen.
Make sure the computer cable is connected between the computer and the projec-
tor. Try pressing the computer activation keys once more. Sometimes you need to 
press them twice to make the image appear on the screen. If you also have a video 
player plugged into theprojector, try pressing the Source button on the keypad or 
the Computer button on the remote.
3There’s no computer image on the screen, just the message, Perfecting the 
Image, in the lower right corner.
The projector may be having a hard time synchronizing with the computer signal. 
Try pressing the Menu button on the projector keypad or remote. On the Image 
menu, turn Auto Image to Off. See the User ’s Guide for help with the menus.
4The computer image fills the screen, but the text is fuzzy and hard to read.
Try setting your computer resolution to 1,024 x 768 (Start/Settings/Control 
Panel/Display/Settings tab). If your computer only goes up to 800 x 600 or 640 x 
480, turn off Auto Resize on the Image menu in the TDP-B1. The image will be 
smaller, but it should be sharp. See the User ’s Guide for help with the menus.
5I can only see part of the computer image on the screen.
Try setting your computer resolution to 1,024 x 768. With some portable comput-
ers, it’s necessary to disable the computer display to do this. You use the activation 
keys to show the image only on the screen.
6How do I play a video through the TDP-B1?
Need to talk to someone?
Contact Toshiba Technical Support.
⇒In North America, call Toshiba’s toll-free customer service & technical support at 
800-457-7777 (available 24 hours a day, 7 days a week). 
⇒For web-based or other electronic technical support, please visit Toshiba at 
 support.toshiba.com. SAFETY INSTRUCTIONS
 Please read and follow all safety instructions provided in this quick start and your User ’s 
Guide BEFORE using your projector. Failure to comply with safety instructions may result 
in fire, electrical shock, or personal injury and may damage or impair protection provided 
by equipment. Please save all safety instructions.Safety DefinitionsWa r n i n g
: Statements identify conditions or practices that could result in permanent 
personal injury.
Caution
: Statements identify conditions or practices that could result in damage to 
your equipment. Safety Symbols
Attention
: For information about usage of a feature, please refer to the User ’s 
Guide.
Wa r n i n g
: Hot surface. Do not touch.
  An arrow pointing to lamp door of the projector.
Safety Terms:Wa r n i n g
: Don’t look directly into the lens when the projector is turned on.
Wa r n i n g :
 To replace the lamp, unplug the power cord. To avoid burns, wait 
30 minutes before opening the lamp door. Follow all instructions provided in 
the User ’s Guide.
Wa r n i n g :  
Please use the power cord provided. Connect the power cord to a 
receptacle with a protective safety (earth) ground terminal.
Wa r n i n g :  
Refer all service to qualified service personnel. Servicing your own projec-
tor will void the warranty. 
Caution
: Don’t block ventilation openings.
Caution:
 Don’t set liquids on the projector. Spilled liquids may damage your projec-
tor.
Caution:
 Don’t place the projector on a hot surface or in direct sunlight.
Caution:
 Do not drop the projector. Transport the projector in an Toshiba-approved 
case; see the User ’s Guide for a list of cases.
Audio cable Video cable
audio
adapter