Toshiba Projector Tdp Mt500 User Manual

OWNER’S MANUAL
DATA PROJECTOR
TDP-MT500 

2
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is in-
tended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance....

3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN
IN THIS OWNERS MANUAL AND THOSE MARKED ON THE UNIT. RETAIN
THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can
result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if
you observe the following procedures for installation, use and servicing. This unit is fully transis-
torized and does not...

4
5. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other products
(including amplifiers) that produce heat.
8. Power-Cord Protection
Power-supply cords should be routed so
that they are not likely to be walked on
or pinched by items placed upon or
against them, paying particular attention
to cords at plugs, convenience recep-
tacles, and the point where they exit from
the product.
6. Water and Moisture
Do not use this product near water.
- for...

5
11. Object and Liquid Entry
Never push objects of any kind into this
product through openings as they may
touch dangerous voltage points or short-
out parts that could result in a fire or elec-
tric shock. Never spill liquid of any kind
on the product.
12. Do not place the product verti-
cally
Do not use the product in the upright
position to project the pictures at the
ceiling, or any other vertical positions. It
may fall down and dangerous.
13. Stack Inhibited
Do not stack other equipment on this...

6
18. Servicing
Do not attempt to service this product
yourself as opening or removing covers
may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
16. Damage Requiring Service
Unplug this product from the wall outlet
and refer servicing to qualified service
personnel under the following condi-
tions:
a) When the power-supply cord or plug is
damaged.
b) If liquid has been spilled, or objects have
fallen into the product.
c) If the product has been...

7
21. Do not leave thermal-paper
documents or easily deformed
items on top of the unit or near
the air exhaust.
The heat from the unit could erase the
information on the thermal paper, or
cause deformation or warping.
Also, when you touch a metal object put
near the air exhaust, a burn may be
caused.
22. Unplug the power plug after
the projector is finished to
use.
Turn off POWER button to bring the pro-
jector into its standby state with the light-
source lamp off. Then, wait about 2 min-
utes and turn...

8
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration Plug type Line voltage
EURO 220 – 240V
UK 220 – 240V
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after changing
the fuse.Plug
configuration Plug type Line voltage
Australian
240V
10A
Switzerland 200 – 240V
240V
6A
North 200 – 240V
American
240V
15A
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and...

9
IMPORTANT PRECAUTIONS
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or
plastic products touching the unit for a long time. They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the product’s precautions.
In the spaces provided below, record the Model and Serial No. located at the bottom of your
projector.
Model No. Serial No.
Retain this information for future reference.
DECLARATION OF...

10
TABLE OF CONTENTS
PREPARATION
Checking accessories ............................................................................................................................................................ 11
Inserting the dry batteries into the remote controller ......................................................................................................... 11
Name and function of operational parts of the projector...