Toshiba Sd 43hk Owners Manual

							
Connecting the FM and AM(MW) Antennas

If AM reception is

poor, connect an

outdoor AM

anterna(not
supplied).

COAXIAL

IM

If FM reception is poor,
connect an outdoor
FM antenna

(not supplied).

FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.

Cooling fan (See 'About Cooling Fan" below.)

QFM antenna
connection

1. Connect
the FM antenna
supplied to the FM 75t2

COAXIAL terminal as temporary measure.

2. Slowly move
the antenna wire around
until you

find a location where reception is good, then
fasten it to a wall or other rigid surface.

• If reception is poor, connect an outdoor antenna.
Before attaching a 75Q coaxial cable (with a standard

type connector), disconnect the supplied FM antenna.

(About the cooling fan)

A cooling Ian c, rnaunteo on the rear panel of
the ceder unit to

prevent atinonnal i0Mperainre •n5 je NE center unit,
thus assuong

normal operation
The cooling fan automatically
slants retailing to

supply extamal cool au to t e inside of the center unit when the

internal temperature exceeds the specified limit.

0 AM(Mw)
antenna connection

1. Connect the AM loop antenna supplied

to the AM and di terminals.

2. If reception is poor
,
connect an outdoor

single vinyl
-
covered wire to the AM

terminal
. (
Keep the AM loop antenna

connected).

For safety, observe the following carefully.

• Make sure there
is good ventilason around the
center unit. Poor

ventilation could overheat and
cause damage

• DO NOT block the cooing tan
and the venblaEion openings or

holes
. (11 they are blocked
by a newspaper or loth
,
et, the heat

may not be able to escape.)

10
 
						

							
Connecting the Optical Equipment

11

For connection
to external

equipment with digital output.

Example: CD recorders. MD (Mini Disc) D/A

conveners or other components equipped

with digital output jacks DIGITAL OUT

Audio Cable
(
Red/White)
It the external analog

component has only one
output jack, you may connect

either L or R.

To
view
pictures from

external input , first

connect the VIDEO IN

lack and then connect the

VIDEO OUT jack.

iSm our cuuNOxevr !dlr r

VIDEO Otll

Connect to external equipment with
analog output.

Example
: VCR, TV, etc.

To Play External Digital/Analog Equipment

Press AUX on the remote control to select DIGITAL IN, AUX1, or AUX2.

Press
Function
on the main unit to select DIGITAL IN, AUXI, or AUX2.

• Each time the button is pressed the mode switches as follows: FM -» AM -+
DVD/CD -» DIGITAL IN -' AUX 1 -+ AUX 2.

Warning
• Always connect

the video and

audio connection

cables to the

equivalent

colored jack,
 
						

							
P. SCAN (P
rogressive Scan
)
Function

Unlike a regular Interlace Scan in which two fields of picture information are alternated to

create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses

one field of information
(
all lines displayed in one pass
)
to create a clear and detailed

picture without visible scan lines.

While the player is in the Stop mode
,
hold the RSCAN button down for _

longerthan 1
second.

• The selection switches back and forth between "t .SCAN" and "7.SCAN" each time the

button is held down for a minimum of 1 second.

• The previous mode is indicated in the display first, followed by the selected mode in about

a second.

What is Progressive
(
or Non
-
Interlaced
)
Scanning? )

Interlaced Scan
(
1 FRAME
= 2 FIELDS)Progressive Scan
(FULL FRAME)

In interlaced
-scan video,
a frame
consists of two

Interlaced fields
(odd and even),
where
each field

contains every other horizontal fine In the frame.
The odd field of alternating
lines is displayed
first, and

then the even field is displayed to fill in the allemating

gaps left by the odd field to form
a single frame.

One frame, displayed every 1/30th of a second, contains
two interlaced fields, thus a total of 60 fields are
displayed every 1/60th of a second each.
The interlaced scanning method
is intended
for capturing

a still object.

The progressive scanning method scans one full frame of
video consecutively down the screen
,
line by line.

As opposed to the interlaced scanning process by which a
video image is drawn in a series of passes
,
you get an

entire Image drawn at one time.

The progressive scanning method
is desirable for dealing

with moving objects. A camera that has the ability to

capture moving objects Is called a'full frame shutter

camera'

/

J

• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive
Video. (It does not work on TVs with conventional component inpuls, i.e , non-progressive scan TVs.)
• Depending on the brand and model of your TV, this function may not work.

12
 
						

							
DVD Playback

1

Press the
OPEN
/
CLOSE
(
4 ) button O

to open the disc tray.

2

Insert a disc.
-a-

• Place a disc gently
into the
tray with the

disc's label facing up.

3
Press the OPEWCLOSE
(
A ) button e

again to close
the disc tray. O

• Playback starts automatically.

13

Pausing Playback
stoppi
. t ". •
.

O

Press
the PLAY/
PAUSE
(
►
lll ) button during Press the STOP
(
n
)
button during playback.

playback
. • During playback, when the STOP (
n
)button is

• To resume, press the PLAY/PAUSE ( Ill ) pressed, the position is stored in the memory, PRESS

button again. PLAY is shown on the display.

=

When the PLAY/PAUSE (
►
/
ll ) button is pressed

subsequently
,
playback resumes from the pos
i
t
i
on at

•
Depending on the disc, the initial disc which it was stopped.

information screen may look different
• It the STOP (
•) button is pressed a second time, the

from disc to disc
.
resume play memory function is canceled
, and STOP is

shown on the display
. When the PLAY/PAUSE (
►
/ll )

button is pressed
,
playback starts from the beginning.
 
						

							
OC0

..C

Using the On
-
Screen Display

The general playback status can be displayed on the TV screen
.
Some items can be changed on the menu.

1

Displays the
repeat mode
, -,
title, chapter
, A-B or OFF.

2

Press the DISPLAY button Press the LEFT/RIGHT
(
A /
►
) Press the UPIDOWN
(
A l
♦)
to

during playback
.
to select an item
,
change the setting of an item.

• The selected item will be
•
The number buttons can be

highlighted
.
also be used for setting

numbers (e.g., title number).
For some functions, press

ENTER to execute the setting.

Items

]
angles
,
and any changes
you make to
the angle number.

Displays the current title number and total number of 4 /
►
, or

available titles
,
and skips to
a desired title number Numbers, ENTER

Chapter Number n ;,_ ,

Time search

Audio language , E"c

and Digital Audio ®
q
oo

Output mode 4 c"

Subtitle language

Angle

Repeat

Items

Track Number rl! 1f3

3

A/
♦

A/
♦

Function
(
Press A /
♦
to select desired item) Selection Method

Displays the current track number, total number of tracks A /
♦ ,
or

and PBC On
mode
, and skips to the desired track number.

Displays the elapsed playing time (Display only)

Repeat

Function
(
Press A /
♦
to select desired item) Selection Method

Displays the current
chapter number and total number of t /
►
, or

available
chapters, and skips to a desired chapter number. Numbers, ENTER

Displays the elapsed playing time
, and Numbers, ENTER
searches a point identified by its elapsed time.

Displays the current audio soundtrack language,

encoding method and channel number, and A / v

any changes you make to the setting

Displays the current subtitles language, and

any changes you make to the setting. A / V

Displays the current angle number and total number of
Displays the audio channel, and

changes
you
make to the audio channel.

Displays the repeat mode
, -,
title, chapter
,
A-B or OFF.

Numbers. ENTER

A/
♦

A/
♦

J

14
 
						

							
Q

MP3/WMA CD Playback

You can play MP3IWMA tiles that have been recorded on a CD-R or CD-ROM on the DVD
video
player.

What is
MP3? MP3 is an abbreviation of Motion Picture

Experts Group (or MPEG) Audio Layer 3. MP3 is simply a

Me format with a data compression ratio of 1 10 (128 Kbps ).

That means,by using MP3 format, one CD-R or CD-SW can
contain 10 limes as much data volume as a regular CD.

Starting Playback2

• It is recommended you turn on your TV when playing

back an MP3/WMA CD.

Press the OPEN/CLOSE
(A b.,ttcn

to load a disc.

2

Press the PLAYIPAUSE
(
►
11 ) button.

What Is WMA? WMA
(
Windows Media Audio) is a file

format
,
created by Microsoft
,
that offers a higher compression

rate and just as good sound quality as MP3
.
Typical MP3 rdes
are about one
-
tenth the size of the original
,
whereas WMA

files are about hall the size of standard MP3.

SI9ACK
L)% ROOT

A TRAC U

t

lQTAACK2 MP3

TRACK7MP3 3

STRACK4.MP3 4

f4)TAACKS MP3 S

&JTRAC"G MP3 _6

TRAC K7MP3 7

1. Disc Type

2. Current track
(
file) and total number of the

tracks on the disc

3. Elapsed playing time and the total playing

time of the current track

4. Repeat mode indicator

•
After detecting the disc
,
playback starts.

• The on-
screen bar and the contents

recorded
on the MP3,WMA CD will be

shown
on the -1 V if it is tinned on
To stop during playback
Press the STOP
(
n
)
button.

Using the On
-
Screen Display

Turn on your TV when playing back an MP3IWMA disc.

When the loaded the MP31WMA disc is recognized
,
the following

on-screen display appears on the TV screen.

(The contents of this on-screen display vary according to the disc - the

way the MP3 [racks were recorded on the disc.)

In stop mode, then select
as follows :

Button
To do

ENTER,
►
u
Stan playback or go into a directory .

A/ T
To selocl a track or directory in STOP mode

1=
:1K'=M%1iiaL

-MJTMCK2MP3 _ 4
N1RAC
K3.MP3 3
NTRACK4.MP3 4

9TMCKRNPJ

. Depending on the recording mode
,
some MP3/WMA CDs cannot be played.

J

15
 
						

							
Repeating Playback

On an MP3 disc. Repeat A
-•
B cannot be used
.
You can enjoy only repeat play.

Press the REPEAT button.
The indication corresponding to the selected

mode appears
on the TV screen.

• Each time you press the button
,
repeat

mode changes as follows:

PEAT RANDOIJI REPEAT:
TRACKJ

•REPEAT
:HANDOM

All tracks recorded on the disc will be played once
in random

order

•REPEAT:TRACK

Current track
will be repeated.

• REPEAT:DIR

Tracks
in the current
directory
will be repeated.

1 • REPEAT : DISC
REPEAT OFF
4-FPEAT DISC

All tracks on the disc will be repeated.

• REPEAT OFF

Repeat play is canceled.(
Normal
play is resumed.)

J

0
Playable files
MP31WMA disc compatibility with this player is limited as follows'

• Playable discs
:
CD-ROM
,
CD-R (650MB 174 min
,
only) • File name A file name should be in alphabet and numerals

CD-RW is not recommendable
.
only and must incorporate
`
MP3" or "WMA"

• Sampling Frequency: 44.1 kHz only extension. e.g:'"" .. " ,MP3
", "".......
WMA"

• Bit rate
'
WMA: 48 kbps
•
192 kbps
(
CBR) • Total number of folders
:
Less than 256

MP3: 32 kbps
-
320 kbps
(
CBR) • Total number of files: Less than 1000

• CC physical format Mode 1
,
Mode 2 XA Form I • WMA code version
:
V7 or V8
(
Stereo sound only)

• File system
:
IS09660 Level 1, 2 or Joliet

0 CD-R/
RW playback compatibility

• Your DVD player can also play CD-R and CD-RW discs • CD-HW has a
lower reflection rate than CD
-
R media and

recorded in digital audio format. When recording
your own consequently
it will take a longer to read CD
-
R discs.

CD-A or CD-RW discs,
make sure
that the recording • CD-RW discs
recorded at high speed tend to be difficult

session is
properly terminated, or they
will not be

playable.

(Depending
on disc properties
and recording
quality,

some CD-R/RW may not be
playable.)

for the DVD player to read
.
If the recording speed for the

CD-RW disc is not predetermined
.
write it at low speed.
This DVD video player requires discs
/recordings to meet certain technical standards in
order to achieve optimal playback quality
.
Prerecorded DVDs are automatically set to

those standards
.
There are many different types of recordable disc formats
(
Including

CD-Ft containing MP3IWMA files). Given the fact that technology in this area is still

maturing.

Toshiba cannel guarantee that all genre of recordable discs will produce optimal

playback quality.

The technical criteria set out in this owner
'
s manual are meant as a guide only.

Customers should also not that permission is required in order to download MP31WMA

files and music from the internet
.
Toshiba has no right to grant such permission.
Permission should always be sought from the copyright owner.

I
REPEAT: DIR

1

Microsoft
,
Windows Media,

and the Windows
Logo are

trademarks or registered

trademarks of Microsoft

Corporation
in both the

L - '-d Sates and other
,.^ .... 05.

a , U^tKfCO 1V

lit',i '
wnm-.
Mena -

16
 
						

							
Forward
/
Reverse Searching

During
playback
, you cansearch
quickly through
a chapter or track for a specific scene

or tune.

Multi-Speed Playback

Each time the 44 button is pressed

a bits

Skipping through a Chapter

Press
the Nand
*I button.

a

J

• Each time the button is pressed during playback, it moves to
the next

or previous chapter and plays it.

no

AMA&

Playing Frame by Frame •

Press the STEP button.

• The picture moves forward one frame

each time the button is pressed.

STEP

O

Each time the N button is pressed

M n

• No sound is heard during

high-speed playback, slow
playback
,
and step motion.

FF
2 X

FF
4 X

FF
8 X

FF
32 X

PLAY

17
 
						

							
0

Slow Playback/Checking the

Remaining Time

Playing Slowly

Each time the SLOW button is pressed

SF 1/2
SF 1/4

SF 1/8

+

SR 1/2

SR 1/d

SR 118

PLAY

I

• Slow motion playback in reverse is not applicable for Video CD.

Checking the Remaining Time
Press the REMAIN button.

• For checking the total and remaining time of a

title or chapter being played.

Each time the REMAIN button is pressed

WiTf, ell

VCD 2.
0 with PBC is OFF

r CHAPTER ELAPSED

CHAPTER REMAIN

TITLE ELAPSED

+

TITLE REMAIN

I

C

TRACK ELAPSED

TRACK REMAIN

OFF

El

18
 
						

							
Repeat Playback

Repeat playback allows you to repeat a chapter, title, or track.

Playing Repeatedly
Press
the REPEAT
button.

Each time the REPEAT button is pressed

•
Repeat playback operation
is not possible with version 2.0 VCD discs
if PBC is turned on.

To operate
this feature
, press the MENU button,
and then select
'PBC OFF".

Press the REPEAT A, >B button at the

beginning (A) of the segment you want to

review.

Press the REPEAT A-B button again at

the end (B) of the segment you want to

review.

• The segment will begin repeating.

Press the REPEAT A- •B button again.

To return to
normal playback

19