Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JAQUARY 1988 
Table 
33 
34 
35 Title 
Toll Restriction Class Office Code Entry 
Toll Restriction Area/Office Code Exception Table 
Toll Restriction Class Area/Office Code Exception Table Se- 
lection 
36 Least Cost Routing Home Area Code 
37 Least Cost Routing Special Codes 
38 Least Cost Routing Parameters 
39 Select Long Distance Information Route 
40 Select Local Call Route 
41 Dial Zero (0) Timeout 
42 Least Cost Routing Area Code Table 
43 Least Cost...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
5) Depress the 01 and 03 keys on station 13. 1) Lock in the SET switch. 
l The corresponding LEDs go on. @ Station 13/17: LED 19 lights steadily. 
6) Depress the m key on station 13. 
l Station 13: All LEDs (except SPKR and 
MIC) begin blinking. 2) To clear station 10 - 33, depress the m- 
key and dial fl q 0. 
7) Depress and release the SET switch again. 
l SET LED goes off. 
l Station 13: LEDs go off. 
l SPKR LED flashes continuously. 
l...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
or changed at station 10. When the system 
is initialized, five messages are automatically 
stored in memory: 
60: OUT TO LUNCH 
61: IN A MEETING 
62: CALL 
63: BACK AT 
64: RETURN ON 
04.30 Timer Reminder Messaging Initializa- 
tion 
04.31 To clear Timer Reminder messages, fol- 
low these procedures: 
1) Lock in the 
SET switch. 
0 Station 13/17: LED 19 lights steadily. 
2) To clear timer codes, depress the m key 
and dial g g a. 
@ SPKR LED...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
TABLE 2--INITIALIZED DATA (continued) 
O#l Program 
Door Phone Selection 
None Selected 
02 Program 
System Assignments (Options) 
Tandem Switching = Not selected 
Stations 18/l 9 Amplified Conference = No Am- 
plified Conference 
AC6 Warning Tone = No tone 
Display Dialed Number Timeout = 15 seconds 
Night Ringing* = Excluded from External Page 
Background Music = Excluded from External 
Page 
External Page = Not included in All Call Page...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 2-INITIALIZED DATA (continued) 
104 Program 0 + = Allowed 
OCC Authorization Code #I AC + 555 = Not allowed 
Blank 
1 XY Program 
105 Program TR Class Area Code Entry 
OCC or Equal Access #2 
All Area Codes Allowed 
_ Blank 
106 Program 
OCC Authorization Code #2 1 X2 Program..- 
TR Class Office Code 5ntry 
Blank All Area Codes Allowed 
108 Program 
2XY Program 
Toll Restriction Override Code #1 
Toll Restriction Area/Office Code Exception...

PROGRAMMING PROCEDURES 
SECTION  500-036-300 
JANUARY  1988 
TABLE 2--INITIALIZED  DATA (continued) 
2#XY  Program 
Area/Office  Code Route  Table 
Chosen  = 8 
STATION  ASSIGNMENTS 
3XX Program 
Station  CO Line  Access 
s  Allowed  = All  lines,  all stations 
3#XX  Program 
:B,  HMDB  and HIOB  Module  Enable 
4XX  Program 
Station  Type Assignment 
I  Assigned*  = All  stations 
Start  = All  stations  Keystrip  “A” As- 
I**  = All  stations 
I TA  VI,  only 
ATA  Se only 
4#XX  Program 
Station...

rmJlitwMMINti HllJGtUURES 
SECTION 500-036-300 
JANUARY 1988 
05 SYSTEM DATA PRINTOUT 
05.00 System Data Printout Via SMDR 
05.01 
If the system is equipped with Station 
Message Detail Recording (SMDR), it is possible 
to obtain a printout of the system data and 
speed dialing memory via a printer that is con- 
nected to the SMDR output port (HSMB mo- 
- dule). 
05.02 The data should be printed during a low 
traffic period since this procedure interferes 
with normal SMDR output. Any call records...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 3 
SYSTEM DATA PRINTOUT SELECTION CODES 
LED on = X LED off = 0 
TABLE 3 
SYSTEM DATA PRINTOUT SELECTION CODES 
(continued) 
LED on = X LED off = 0 
TABLE 4 
AUTOMATIC DIALING MEMORY PRINTOUT SELECTION CODES 
AUTO DIAL LISTS (System & Stations 10 - 25)  

PROGRAMMING PROCEDURES 
SECTION 300-020-300 
JULY 1986 
#!A SYSTEM PROGRAMMING #t# 
l:SELECT(LED ON) 
21 16 15 8 7 1INT 
0 1 000000 00000000 00000000 
0 2 000000 00000000 00000000 
0 tt2 000000 00001000 00000110 
0 3 000000 00010000 00000101 
0 4 000000 00000000 01110000 
0 5 000000 00000000 00000100 
0 85 000000 00000000 00000010 
0 6 000000 00000000 00000000 
0 U6 000000 00000000 00000000 
0 7 000000 00000000 00000000 
0 0 000000 00000000 00000000 
0 #0 111111 11111111 11111110 
0 9 111111 11111111...

PROGRAMMING PROCEDURES 
SECTION 300-020-300 
JULY1986 
## SYSTEM PROGRfVlMING ## 
l:SELECT(LED ON) .*- 
21 16 15 a 7 1INT 
1 00 000000 00000000 00000001 
1 01 000000 00000000 00000000 
1 02 000000 00000000 00000000 
(DATA = DIAL NUMaER] 
1 03 10515 
1 04 12 
1 05 10736 
1 06 9 
1 08 5555 
1 09 3621 
l:SELECT(LED ON) 
21 16 15 8 7 1INT 
1 10 000000 00000000 00000000 
1 11 000000 00000000 00000000 
1 14 000 - 999 
1 18 000 - 999 
l:SELECT(LED ON) 
21 16 15 a 7 1iNT 
1 90 000000 00000000 00000000 
(DFITQ =...