Home > Toshiba > Notebook > Toshiba Tecra 780dvd Maintenance Manual

Toshiba Tecra 780dvd Maintenance Manual

Add to Favourites
    Download as PDF

    View the Toshiba Tecra 780dvd Maintenance Manual for free. All the Toshiba manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Toshiba TRR4/00, Tecra Page 7Tecra 780CDM / 780DVD Disassembly Overview This section explains how to remove Field Replaceable Units (FRUs). It may not be neces- sary to remove all the FRUs in order to replace one. The chart is a guide to which FRUs need to be removed in order to remove others. The section numbers on the chart refer to the sections in the Maintenance Manual, Chapter 4. Always start by removing the battery pack, next, optional items such as the optional PC card and optional memory module,...
    Page 2 4/00, Tecra Toshiba TRRPage 8Tecra 780CDM / 780DVD Disassembly Overview, (cont.) To remove the optional PC card, make sure the computer is in boot mode, then follow the steps below. 1.Turn off the power to the computer. Disconnect the AC adapter and all external cables connected to the computer. 2.Remove the battery pack. 3.Open or remove the PC card slot cover. 4.Press in slightly on the eject button for the upper and/or lower card and the button will pop out fully. 5.Now, press the button firmly to pop...
    Page 3 Toshiba TRR4/00, Tecra Page 9Tecra 780CDM / 780DVD Disassembly Overview, (cont.) 1.To install the cover, first remove the SelectBay module then hold the cover by the two finger grips and push it into place until you hear the latches click. 2.To remove the cover, grasp the two finger grips and pull the cover out. You can use the SelectBay cover when you do not need to use a SelectBay module. 1.Remove six M2x3 silver screws and two M2.5x6 silver screws securing the frame to the DVD-ROM drive. 2.Remove the...
    Page 4 4/00, Tecra Toshiba TRRPage 10Tecra 780CDM / 780DVD Disassembly Overview, (cont.) 1.Seat the FDD in the bracket and secure the bracket with four M2x3 silver screws. Tighten screws to a torque of less than 2.2 kgfcm. 2.Insert the flexible cable into the connector. Press gently to assure a firm connection. 3.Seat the FDD in the lower plastic frame and set the upper shield cover in place. 4.Seat the flexible cable connector into the lower plastic frame. 5.Set the upper plastic frame in place, snap the two...
    Start reading Toshiba Tecra 780dvd Maintenance Manual

    Related Manuals for Toshiba Tecra 780dvd Maintenance Manual

    All Toshiba manuals