TP-Link Router TL-R460 User Manual

TL-R460Cable/DSL Router User Guide
 
 
34
 
Figure 4-21 
Step 3:  After that, select  Enabled to make the entry take effect. 
Step 4:  Click Save  button to save the configuration. 
) Note: 
1)  If you want to add more than one reserved IP, please go to  step 1 to continue. 
2)  It is possible that you configure more  than one type of available service on a 
computer or server, it means the IP addresses for the virtual servers are same.   
Other configurations for the entries as shown in Figure 4-21: 
C...

TL-R460Cable/DSL Router User Guide
 
 
35
 
Figure 4-22 
¾  Trigger Port  - This displays the port for outgoi ng traffic. An outgoing connection 
using this port will Trigger this rule. 
¾  Trigger Protocol  - This displays the protocol  used for Trigger Ports, either  TCP, 
UDP , or All (all protocols supported by the router). 
¾  Incoming Ports  -  This displays the port or port  range used by the remote system, 
they are used for responding to the out going request. A response using one of 
these...

TL-R460Cable/DSL Router User Guide
 
 
36
applications that you want, please  configure these options manually. 
 
Figure 4-23 
Step 3:  After that, select  Enabled to make the entry take effect. 
Step 4:  Click Save  button to save the configuration. 
) Note: 
1)  If you want to add more than one reserved IP, please go to  step 1 to continue. 
2)  When the trigger connec tion is released, the according opening ports will be 
closed. 
3)  Each rule allowed to be used only by one host on LAN...

TL-R460Cable/DSL Router User Guide
 
 
37
forwards all the ports at the same time. An y PC whose port is being forwarded must have 
its DHCP client function dis abled and should have a new static IP address assigned to it 
because its IP address may change  when using the DHCP function. 
 
Figure 4-24 
To assign a computer or server to be a DMZ server: 
Step 1:  Click the  Enable radio button 
Step 2:  Enter the local host IP address in the  DMZ Host IP Address field 
Step 3:  Click the  Save button. 
)...

TL-R460Cable/DSL Router User Guide
 
 
38
Allowing the function may caus e a risk to security, this feature is disabled by 
default.  
¾  App Description -  This displays the description pr ovided by the application in the 
UPnP request. 
¾  External Port  - This displays the external por t, which the router opened for the 
application. 
¾  Protocol  -  This displays the protoc ol for the application. 
¾  Internal Port  -  This displays the Internal port, which the router opened for local 
host. 
¾  IP...

TL-R460Cable/DSL Router User Guide
 
 
39
 
Figure 4-27 
¾  Enable Firewall  -  Enable the general firewall switch or not. 
¾  Enable IP Address Filtering  -  Enable the IP Address Filtering or not. There are two 
default filtering rules, please se lect the rule for your need. 
¾  Enable Domain Filtering  - Enable the Domain Filtering or not. There are two 
default filtering rules, please se lect the rule for your need. 
¾  Enable MAC Address Filtering  - Enable MAC Address Filtering or not. There are...

TL-R460Cable/DSL Router User Guide
 
 
40
 
Figure 4-28 
¾  Effective Time -  This is the time or the range of time  for the entry to take effect. For 
example, 1800 - 2200, it means that the entry will take  effect from 18:00 to 22:00. 
¾  LAN IP - This is the LAN IP address or the range of LAN IP addresses in 
dotted-decimal notation format. For exam ple, 192.168.1.20 - 192.168.1.30. Keep 
the field blank, which means all LAN IP  addresses are controlled by the rule.   
¾  LAN Port  - This is the LAN...

TL-R460Cable/DSL Router User Guide
 
 
41
Step 1:  Enable the “Firewall” and “IP Address F iltering” on the Firewall screen (show in 
Figure 4-27), and then, you should select  the Default IP Address Filtering Rul
 e 
Allow the packets not specified by any  filtering rules to pass through the 
router. 
Step 2:  Click Add New… /Modify  shown in  Figure 4-28, you will see a new screen 
shown in  Figure 4-29. 
Step 3:  Enter the “Ef

fective time” that the  rule will take effect as shown in  Figure 4-29....

TL-R460Cable/DSL Router User Guide
 
 
42
Other configurations for the entries as shown in Figure 4-28: 
C
lick the  Delete button to delete the entry. 
Click the  Enable All button to enable all the entries. 
Click the  Disable All  button to disable all the entries. 
Click the  Delete All  button to delete all the entries. 
Click the  Previous  button to view the informat ion in the previous screen, click the  Next 
button to view the information in the next screen. 
4.6.3  Domain Filtering 
Choose...

TL-R460Cable/DSL Router User Guide
 
 
43
For example:  if you want to block the PCs on your LAN from accessing websites 
www.xxyy.com.cn
,  www.aabbcc.com and websites with end of  .net on the Internet, while 
no limit for other websites, y ou can configure as follows. 
Step 1:  Enable the “Firewall” and “Domain Filt ering” on the Firewall screen (show in 
Figure 4-27). 
Step 2:  C

lick  Add New… /Modify  shown in  Figure 4-31, you will see a new screen 
shown in  Figure 4-32. 
Step 3:  Enter the “Ef...