TP-Link Router TL-WR740N User Manual

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 64 - 
 
Figure 4-46    Access Control Rule Management 
¾  
Enable Internet Access Control -  Select the check box to enable the Internet Access 
Control function, so the Default  Filter Policy can take effect.   
¾ Rule Name -  Here displays the name of the rule and this name is unique.   
¾ Host -  Here displays the host selected in the corresponding rule.   
¾ Target -  Here displays the target sele cted in the corresponding rule.   
¾ Schedule -  Here...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 65 - 
5.  Select a schedule from the Schedule drop-down list or choose “ Click Here To Add New 
Schedule ”. 
6. In the  Action field, select  Deny or Allow . 
7. In the  Status field, select  Enabled or Disabled to enable or disable your entry. 
8. Click the  Save button. 
Click the  Enable All  button to enable all the rules in the list. 
Click the  Disable All button to disable all the rules in the list. 
Click the  Delete All button to delete all the...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 66 - 
3. Click “Access Control  → Schedule ” in the left to enter the Schedule Settings page. 
Add a new entry with the Schedule Description  is Schedule_1, Day is Sat and Sun, Start 
Time is 1800 and Stop Time is 2000.   
4. Click “ Access Control →  Rule” in the left to return to the Access Control Rule 
Management page. Select “ Enable Internet Access Control ” and choose Deny the 
packets not specified by any access cont rol policy to pass through the...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 67 - 
To add a new entry, please follow the steps below. 
1. Click the Add New… button. 
2. In the  Mode field, select IP Address or MAC Address. 
z If you select IP Address, the screen shown is  Figure 4-49.  
1)  In  Host Description  field, create a unique description for the host (e.g. Host_1).   
2)  In  LAN IP Address  field, enter the IP address. 
z If you select MAC Address, the screen shown is  Figure 4-50.  
1)  In  Host Description  field,...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 68 - 
3. In Host Description  field, create a unique description for the host (e.g. Host_1).   
4. In  MAC Address  field, enter 00-11-22-33-44-AA.   
5. Click  Save to complete the settings.   
Then you will go back to the Host Se ttings page and see the following list. 
 
4.11.3 Target 
Choose menu “Access Control  → Ta r g e t ”, you can view and set a Ta rget list in the screen as 
shown in  Figure 4-51 . The target list is necessary for the Access...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 69 - 
1) In  Target Description  field, create a unique description for the target (e.g. 
Target_1). 
2)  In  Domain Name  field, enter the domain name in  the blank. You can enter 4 domain 
names. 
3. Click the  Save button. 
Click the  Delete All button to delete all the entries in the table. 
Click the  Next button to go to the next page, or click the  Previous button return to the previous 
page. 
 
Figure 4-52    Add or Modify an Access Target Entry...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 70 - 
1. Click Add New…  button in Figure 4-51  to enter the Add or Modify an Access Target 
Entry page.   
2. In  Mode field, select Domain Name  from the drop-down list.   
3. In  Target Description field, create a unique description fo r the target (e.g. Target_1).   
4. In  Domain Name  field, enter www.google.com.   
5. Click  Save to complete the settings.   
Then you will go back to the Target  Settings page and see the following list, 
 
4.11.4...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 71 - 
5. Click Save to complete the settings.   
Click the  Delete All button to delete all the entries in the table. 
Click the  Next button to go to the next page, or click the  Previous button return to the previous 
page. 
 
Figure 4-55    Advanced Schedule Settings 
For example : If you desire to restrict the inter net activities of host with MAC address 
00-11-22-33-44-AA to access www.google.com only from  18:00 to 20:00 on Saturday and 
Sunday ,...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 72 - 
4.12 Advance Routing 
 
Figure 4-56 Advanced Routing Menu 
There are two submenus under  the Network menu (shown in Figure 4-56): Static Routing List  
and  System Routing Table . Click any of them, and you will be able to configure the 
corresponding function. 
4.12.1  Static Routing 
Choose menu  “Advanced Routing  → Static Routing”, and you can configure  the static route in 
the next screen, shown in  Figure 4-57. A static route is a pre-de...

TL-WR740N/TL-WR741ND150Mbps Wireless N Router 
- 73 - 
2.  Enter the following data. 
¾ Destination IP Address  -  The Destination IP Address  is the address of the network or 
host that you want to a ssign to a static route. 
¾ Subnet Mask  - The  Subnet Mask determines which portion of an IP Address is the 
network portion, and which por tion is the host portion. 
¾ Gateway  - This is the IP Address of the gateway  device that allows for contact between 
the Router and the network or host. 
3. Select...