Home > Vidicode > Telephone > Vidicode Call Recorder Quad Manual

Vidicode Call Recorder Quad Manual

Here you can view all the pages of manual Vidicode Call Recorder Quad Manual. The Vidicode manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 41

Call Recorder Quad manual  ©Vidicode 2002 41 
FTP pwd: 0000
NEXT CHANGE BACK
Set the Ftp password 
• Press CHANGE to change the Ftp password. 
FTP pwd:▓
CANCEL
Enter the Ftp password 
Use the numerical keys to enter the Ftp password. 
• Press STORE to save the Ftp password. 
• Press NEXT to save and move on to the next menu item. 
8.6  FTP server port 
Ftp server port is the port number through which the Archive software can log 
on to the Call Recorder Quad. The Ftp server port is default set to 21, as...

Page 42

Call Recorder Quad manual  ©Vidicode 2002  42  
8.7 DHCP server 
In case a DHCP server is used on the network the Use DHCP server option 
must be enabled. In case a DHCP server is not used on the network the Use 
DHCP server option must be disabled. 
Use DHCP server: No
NEXT CHANGE BACK
Enable DHCP server 
• Press CHANGE to enable DHCP server. 
Use DHCP server: Yes
NEXT CHANGE BACK
DHCP server enabled 
• Press NEXT to save and move on to the next menu item. 
When a DHCP server is used, the IP and Gateway...

Page 43

Call Recorder Quad manual  ©Vidicode 2002 43 
• Press STORE to save the IP address of the Call Recorder Quad. 
• Press NEXT to save and move on to the next menu item. 
8.9  IP subnet mask 
The IP subnet mask is used by the Call Recorder Quad if access from outside 
the network is required. In this case the Gateway will need to be entered as 
well. In case the used SMTP server is not on the local network the IP mask 
and gateway need to be entered. 
IP mask: 255:255:255:000
NEXT CHANGE BACK
Set the IP...

Page 44

Call Recorder Quad manual  ©Vidicode 2002  44  
Gateway:▓00:000:000:000
STORE CANCEL
Enter the Gateway of the Call Recorder Quad 
Use the numerical keys to enter the Gateway of the Call Recorder Quad. 
• Press STORE to save the Gateway of the Call Recorder Quad. 
• Press NEXT to save and move on to the next menu item. 
8.11 IP name 
Aside from the IP address the Call Recorder Quad can also be addressed by 
an IP name if your DNS server supports this function. 
IP name: AM3-00041
NEXT CHANGE BACK
Set an...

Page 45

Call Recorder Quad manual  ©Vidicode 2002 45 
Monitor active: No
NEXT CHANGE BACK
Enabling Monitor 
• 
Press CHANGE to enable the Monitor. 
• Press NEXT to move on to the setting of the Monitor password. 
The monitor password is a special password that is used to log on to the Call 
Recorder Quad. This password is also set in the RTR Call Monitor software. 
Monitor pwd: 0000
CHANGE BACK
Enabling Monitor 
• 
Press CHANGE to enter a password 
• Press BACK to exit the network setting menu  

Page 46

Call Recorder Quad manual  ©Vidicode 2002  46   

Page 47

Call Recorder Quad manual  ©Vidicode 2002 47 
9  The Call Recorder Quad as microphone 
recorder 
The Call Recorder Quad can also be used as call recorder or as memo 
recorder. It is possible to configure the Call Recorder Quad to give the option 
to store or delete the recording when the recording has been stopped. You 
dont need to worry about enough space on your cassette, nor is there a risk 
of recording over a previous recording. 
9.1  Call Recorder Quad as microphone/memo 
recorder 
The Call...

Page 48

Call Recorder Quad manual  ©Vidicode 2002  48   

Page 49

Call Recorder Quad manual  ©Vidicode 2002 49 
10 Encrypted recording 
Encrypting recordings is done to prevent unauthorized playback of and 
listening to recordings. The CRQ uses a CryptoCard to encrypt recordings. 
The CryptoCard is a chip card that holds the key to the encryption and 
decryption. Encrypted recordings can only be played back together with the 
original or a matching CryptoCard.  
The CRQ is equipped with a card reader specifically for this purpose, it is 
located on the right side of...

Page 50

Call Recorder Quad manual  ©Vidicode 2002  50  
New Card Code accepted.
STOP
The new card code accepted. 
A CryptoCard allows for two invalid PIN code entries. After the third invalid Pin 
code entry the CryptoCard is disabled. The next time the CRQ will ask for the 
PUC code to enable the card again. The CryptoCard allows for four invalid 
PUC code entries. After the fifth invalid PUC code entry the CRQ will disable 
the card definitively. It is advised to keep the PUC code in a safe place. 
10.2 Making...
Start reading Vidicode Call Recorder Quad Manual
All Vidicode manuals