Vidikron Projector Vision Model 100t User Manual
Here you can view all the pages of manual Vidikron Projector Vision Model 100t User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Installation Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 21 3.6 Connections to the Vision 90t/100t Proceed as follows to connect the Vision 90t/100t to your video sources, external controller(s) – if present – and AC power. When connecting your equipment: Turn off all equipment before making any connections. Use the correct signal cables for each source. Ensure the cables are firmly connected. Tighten the thumbscrews on connectors that have them. Connector Panel...
Page 32
Installation 22 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual Digital (DTV) RGB Connections: See Figure 3-7. Figure 3-7. Digital (DTV) RGB Connections DVI 1 DVI 1 HD1 HD2 Y G G Y H VINPUTS HV HD1HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y PrPb VIDEO VIDEO S-VIDEO 2S-VIDEO 2 S-VIDEO 1S-VIDEO 1 RS-232 CONTROL RS-232 CONTROL IR IR 1 23 1 2 3TRIGGERSTRIGGERS DTV or Progressive Component (YPbPr) Source Red/Pr Green/Y Blue/Pb Horiz Vert
Page 33
Installation Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 23 Analog (Computer) RGB Connections: See Figure 3-8. Figure 3-8. Analog RGB Connections DVI 1 DVI 1 HD1 HD2 Y G G Y H VINPUTS HV HD1HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y PrPb VIDEO VIDEO S-VIDEO 2S-VIDEO 2 S-VIDEO 1S-VIDEO 1 RS-232 CONTROL RS-232 CONTROL IR IR 12 3 1 2 3TRIGGERSTRIGGERS Personal Computer Red Green Blue Horiz Vert
Page 34
Installation 24 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual Composite/S-Video/Component Video Connections: See Figure 3-9. Figure 3-9. Composite, S-Video and Component Video Connections DVI 1 DVI 1 HD1 HD2 Y G G Y H VINPUTS HV HD1HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y PrPb VIDEO VIDEO S-VIDEO 2S-VIDEO 2 S-VIDEO 1S-VIDEO 1 RS-232 CONTROL RS-232 CONTROL IR IR 12 3 1 2 3TRIGGERSTRIGGERS DVD Player, VCR, Satellite Receiver, Laser Disc etc.
Page 35
Installation Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 25 RS-232 Controller Connection Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation system (if present) to the RS-232 CONTROL port on the Vision 90t/100t; see Figure 3-10. For more information about using this connection, refer to Serial Communications on page 49. Figure 3-10. RS-232 Control System Connection Connecting 12-Volt Trigger Outputs to External Theater Equipment If your...
Page 36
Installation 26 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual If your home theater contains a retractable screen, screen mask or other 12-Volt trigger-activated equipment, connect it to a 12-Volt trigger output as shown in Figure 3-12. Figure 3-12. Connecting a 12-Volt Trigger Output to Other Equipment Connecting to AC PowerPlug the female end of the power cord into the AC receptacle on the rear of the Vision 90t/100t (AC 100V ~ 240V). Then, connect the other end to your AC power...
Page 37
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 27 4.1 Turning on the Power 1. Turn on your source components. 2. Turn on the main power switch on the projector. 3. If this is an AutoScope-equipped projector, turn on the main power switch at the rear of the AutoScope lens motor. The lens motor power switch is located next to the AC input. 4. Press the ON button on the remote control – or the POWER button on the Vision 90t/100t rear panel – to turn on the projector. The vacuum...
Page 38
Operation 28 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 4.3 Lens Adjustments To access the motorized lens controls, select Display Device from the Service Menu, then select Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus: FocusTo focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press and hold the ENTER button. ZoomTo make the picture smaller (zoom out), use the...
Page 39
Operation Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 29 Figure 4-1. Vision 90t/100t OSD Menu Structure Calibration ISF Night - Display ColorGain Offset Gamma Lamp Power Color Temp ISF Night - Input ImageBrightness Contrast Color Tint Sharpness ISF Night - Input ColorGain Offset Chroma Delay Phase Noise Filter ISF Day - Display ColorGain Offset Gamma Lamp Power Color Temp ISF Day - Input ImageBrightness Contrast Color Tint Sharpness ISF Day - Input ColorGain Offset Chroma Delay...
Page 40
Operation 30 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual Main MenuThe Main Menu is the starting point for accessing all projector functions. (The Calibration and Service menus are hidden and not accessible until you enter a passcode.) Input SourceFrom the Main Menu, select Input Source to choose a video signal source. The active source is indicated by an arrow (➨) to its left; in the example at left, Composite is the active source. Aspect RatioTo change the aspect ratio (size...