Vidikron Projector Vision Model 100t User Manual

Vision 90t/100t Color Gamut Adjustment
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual A-3 
 
Figure A-3. Vision 90t/100t Secondary RS-232 Port
4. Connect the color sensor to any available COM or USB port. 
5. Launch HyperTerminal. Open a connection using these parameters: 19200 baud, 8 data 
bits, no parity,1 stop bit and no flow control. 
6. Press . The Vision 90t/100t responds with “+>” to indicate that it is ready to 
accept commands. 
7. Start your color analyzer. Position the...

Vision 90t/100t Color Gamut Adjustment
A-4 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
A.4 
Adjusting the Gamut
1. In HyperTerminal, type gamut white and press . The Vision 90t/100t 
displays a white field on the screen and the current x and y coordinates for white on the 
command line. 
2. Using the color analyzer, measure the x and y coordinates for about 15 seconds. Make a 
note of the results. 
3. In HyperTerminal, use the gamut set white command to change the x and y...

Vision 90t/100t Color Gamut Adjustment
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual A-5 
11. In HyperTerminal, use the gamut set green command to change the x and y 
coordinates to the values you obtained in Step 10. 
12. To confirm the change, repeat Step 9. The displayed x and y values should match what 
you just entered. 
13. Type gamut blue and press . The Vision 90t/100t displays a blue field on 
the screen and the current x and y coordinates for blue on the command line. 
14....

Vision 90t/100t Color Gamut Adjustment
A-6 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
Notes: 

Vidikron
2900 Faber Street
Union City, CA 94587
510-324-5900
Fax 510-324-5905
1-888-4-VIDIKRON
www.vidikron.com
RUMA-011085
rev. 09-29-06  v4.0
SERIAL NUMBER