Vidikron Projector Vision Model 12 User Manual

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Vidikron Vision 
Model
 10 and Model 12 DLP Projectors. Throughout this manual, the Vidikron Vision 
10/Vision 12 DLP Projector is referred to simply as the “Vision 10/12.” 
Target AudienceVidikron has prepared this manual to help home theater installers and end users get the 
most out of the Vision 10/12. 
Vidikron has made every effort to...

Introduction
2 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the manual, 
to emphasize points that you must keep in mind to avoid problems with your equipment or 
injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual...

Introduction
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 3 
PREL
IMINARY
1.3 
Description, Features and 
Benefits
Vidikron proudly introduces its most affordable home 
theater projectors to date -- the Vision Model 10 and 
Model 12. The Vision 10/12 offers a performance 
feature set based on the latest generation of DLP™ 
light engines with Vidikron’s exclusive Imagix™ video 
processing technology to produce outstanding 
blacks, superior contrast performance, maximum 
screen brightness and...

Introduction
4 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
Parts List Your Vision 10/12 is shipped with the following items. If any items are missing or damaged, 
please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON. 
 Vision 10/Vision 12 DLP Projector
Remote Control Unit and two (2), AAA-size batteries 
 HD 15-pin VGA to HD 15-pin VGA cable
 DVI-D to DVI-D cable
 AC Power Cord
 Warranty information and registration card
 Vidikron Vision...

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 5 
PREL
IMINARY
2.1 
Vision 10/12 at a GlanceFigure 2-1 and Figure 2-2 show the locations of key Vision 10/12 projector components.
 
Front/Top/Side View
Figure 2-1. Vision 10/12 Top/Front/Side View
2Controls and Functions
1
11
10
9
2
345678 

Controls and Functions
6 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
1.TOP IR SENSOR
2.VERTICAL LENS SHIFT DIAL 
Shifts the image up or down.
3.INTAKE VENT 
4.ADJUSTABLE FEET 
Use to adjust the height or projection angle. 
5.VIDIKRON LOGO 
The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) 
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and 
rotate it 180 degrees. 
6.FRONT IR SENSOR
7.FOCUS/ZOOM RING...

Controls and Functions
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 7 
PREL
IMINARY
Rear/Top/Side View
Figure 2-2. Vision 10/12 Rear/Top/Side View
1
8
7
234
6
109
5 

Controls and Functions
8 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
1.COMPOSITE VIDEO INPUT 
Standard composite video input for connecting a VCR, camcorder, laser disc player or 
other composite video source.
2.S-VIDEO 
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS 
(S-VHS) VCR. 
3.COMPONENT VIDEO (RCA connectors) 
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input. 
This is the input for component...

Controls and Functions
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 9 
PREL
IMINARY
2.2 
Vision 10/12 Remote 
Control
Figure 2-3 shows the Vision 10/12 remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-3. Vision 10/12 Remote Control
1
2
3
4
5
6
7
8
9
10
15
14
13
12
11 

Controls and Functions
10 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
1.ON / OFF 
Press to turn the projector on or off.
2.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
3.Source Selection Buttons:  
 
VIDEO 
Press to switch to the Composite video input.  
 
COMP 1 (Component 1) 
Press to switch to the Component 1 (480i/576i/720p/1080i) video input.  
 
RGB HD 
Press to switch to the RGB HD input.  
 
S-VID 1 (S-Video)...