ViewSonic N2750w Users Guide

E
N
G L I
S
H
TEXT/ MIX/ PICTURE button
In TV Mode:  Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode.
In TELETEXT Mode:  Press the button again to superimpose a Teletext broadcast
onto the screen of current TV program (mixed Mode).
In MIXED Mode:  Press the button again to return to the normal TV screen (current
program).
Teletext function control button
Press the Index button to return to index page.
When you press this button in teletext mode, a CURSOR appears. This cursor
(rectangular...

E
N
G
L
I
S
H
Hold button
Press this button to remove the information from the display and stop the automatic
page change will occur if a teletext page consists of 2 or more sub pages.
Continue press this button again. The number of sub pages and the sub page
displayed is, usually, shown on the screen below the time. When this button is
pressed, the stop symbol is displayed at the left-top corner of the screen, and the
automatic changing is inhibited.
Store button
Store current pages in List mode.
Press...

E
N
G L I
S
H
1  Remove the battery cover by pulling then lifting the knob on the cover.
2  Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3  Reattach the battery cover.
1. Insert Remote Control Batteries
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries...

E
N
G L I
S
H
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
4. Connect AV, S-Video, YPbPr to Video Devices
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
3. Connect Audio Cable
OPTIONAL:
To connect an external amplifier,
connect the L/R RCA cable from
the TV AUDIO OUT port to the
appropriate AUDIO IN port on a
compatible amplifier as shown on
the right.
Stereo system
VCR
AV model:
RCA  A/V Cable
(Cable not supplied) Audio Cable (Cable...

E
N
G L I
S
H
S-Video model:
YPbPr model:
DVD Palyer or VCR VCR
Audio in Cable (Cable not supplied)
S-Video Cable
(Cable not supplied)
YPbPr Cable
(Cable not supplied)
Audio in Cable
(Cable not supplied)
ViewSonic     N2750w    14
 

E
N
G L I
S
H
Connect the VGA cable from VGA output of PC to the VGA terminal input of\
 N2750w.
PC up to 1280 x 1024, 1024 x 768 is the preferred resolution.
5. Connect to the PC
VGA (15pin D-Sub):
Connect the Audio In cable (green) from audio output of your PC to the audio input\
terminal (green) of N2750w.
PC Audio in:
PC
VGA 15 Pin Cable
(Cable not supplied)
PC
PC Audio in Cable
(Cable not supplied)
ViewSonic     N2750w    15
 

E
N
G L I
S
H6. Connect power cable
AC wall socket
Connect Earphone from compatible devices into the back panel of N2750w.
Earphone:
Earphone
(Earphone not supplied)
AC Switch
Switch to ON
Connect the power cord to the N2750w then to a properly grounded AC outlet. Turn on
the AC Switch on the back of N2750w
ViewSonic     N2750w    16
 

E
N
G
L
I
S
H
8. Select input source for your LCDTV display, via either OSD menu or
   Remote control
The Enter key of N2750w is the shortcut key for selection of input source to display.
TV key of remote control is shortcut for TV selection.
Press the Power
button on top of the
LCD display. Or press
the Power On (red)
button on the Remote
Control. Turn Video
source power ON.
7. Turn Power ON
ViewSonic     N2750w    17
 

E
N
G L I
S
H
Basic operation
Powering the LCD TV
To adjust the function of your LCD TV, you may use your remote control or those but-
tons onto your LCD TV to set input sources, such as OSD sources, volume adjusting,
and etc.
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main Power Switch. (If the LCD TV will not be used for a long period of
time, please turn it off)
Power On/Off:
To turn the LCD TV on/off :
Press the  POWER button under the...

E
N
G L I
S
H
Info
Freeze
Display the current information,
such as input source, resolution,
vertical frequency, resolution
type, channel, and sound mode.
Press  INFO , and the current state
will be displayed on the screen.
To freeze the main picture.
When the picture stops,
The sound still continues.
Input Source Select
There are Composite, S-Video, RGB,
Component, TV, and SCART sources provided.
Using the OSD Function
You can use the OSD menus and options to adjust various settings by using\
 your re-...