ViewSonic Pj502 Projector User Manual

ViewSonic  PJ50228
MyScreenThis item functions for capturing the MyScreen of the blank screen and the start 
up screen. Please execute displaying the input including the picture you want to 
capture.
1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start 
capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press the ENTER button 
on the remote control when the picture is display. The picture will freeze and 
the frame...

ViewSonic  PJ50229
OPTION menu
With the OPTION menu, items shown in the table below can be per-
formed.
Select an item using the menu cursor buttons 
S/T. And press the menu
cursor button 
X or the ENTER button on the remote control to progress,
except for the items LAMP TIME and FILTER TIME. Then perform it re-
ferring to the following table.
Item Description
SEARCH
Using the buttons S/T turns on/off the message function.
TURN ON 

ViewSonic  PJ50230
SERVICESelecting this item displays the SERVICE menu.
Select an item using the menu cursor buttons 
S/T, and press the menu cursor 
button 
X or the ENTER button on the remote control to progress.
FAN SPEED 

ViewSonic  PJ50231
Maintenance
Lamp
 WARNING  HIGH VOLTAGE  HIGH TEMPERATURE  HIGH PRESSURE
X The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, 
or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a 
different lifetime, and some may burst or burn out soon after you start using them. In addition, 
when the bulb bursts, it is possible for shards of glass
 to fly into the lamp housing, and for gas con-
taining mercury...

ViewSonic  PJ50232
When the indicators or a message prompts you to replace the lamp, replace the lamp as 
soon as possible.
1 Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 
minutes.
2. To prepare a new lamp, contact your dealer and tell the lamp type number: PRJ-RLC-015
If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer 
to replace the lamp.
In the case of replacement by yourself, 
3. After making sure that the projector...

ViewSonic  PJ50233
Air filter
When the indicators or a message prompts you to clean the air 
filter, clean the air filter as soon as possible. If the air filter be-
comes clogged by dust or the like, internal temperatures rise and 
the power may be automatically turned off for malfunction pre-
vention.
1. Turn the projector off, and unplug the power cord. Allow the 
projector to cool for at least 45 minutes. And prepare a vacu-
um cleaner.
2. After making sure that the projector is cool adequately,...

ViewSonic  PJ50234
Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by 
your dealer about once every 2 years.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please 
take care of the lens, being cautious of the handling.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2. After making sure that the projector is cool...

ViewSonic  PJ50235
Troubleshooting
Related messages
When the units power is on, messages such as those shown below may be displayed. When 
any such message is displayed on the screen, please respond as described below. If the 
same message is displayed after the treatment, or if a message other than the following ap-
pears, please contact your dealer or service company.
Although these messages will be automatically disappeared around several minutes, it will 
be reappeared every time the power is turned...

ViewSonic  PJ50236
Regarding the indicator lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator 
have the meanings as described in the table below. Please respond in accordance with the 
instructions within the table. If the same indication is displayed after the treatment, or if an 
indication other than the following is displayed, please contact your dealer or service com-
pany.
POWER
indicatorLAMP
indicatorTEMP
indicatorDescription
Lighting In 
OrangeTurned...

ViewSonic  PJ50237
NOTE • When the interior portion has become overheated, for safety purposes, the power 
source is automatically turned off, and the indicator lamps may also be turned off. In such a 
case, press the “O” (OFF) side of the power switch, and wait at least 45 minutes. After the 
projector has sufficiently cooled down, please make confirmation of the attachment state of 
the lamp and lamp cover, and then turn the power on again.
POWER
indicatorLAMP
indicatorTEMP
indicatorDescription...