ViewSonic Pj510 Projector User Manual

PJ510
User Guide 

ViewSonic  PJ510i
Contents
For Your Records  ....................................................................................................... 1
Features ............................................................................................................................. 2
Projector Features  ...................................................................................................... 2
Part Names...

iiViewSonic  PJ510
OPTION Menu  .......................................................................................................... 29
Lamp ................................................................................................................................. 30
Replacing The Lamp   ................................................................................................ 31
Air Filter...

1ViewSonic  PJ510
Copyright © ViewSonic Corporation, 2003.  All rights reserved. 
Apple, Mac and ADB registered tr ademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows  logo are registered trademarks of Microsoft 
Corporation in the United States and other countries. 
ViewSonic, the three birds logo 
A-CD-PJ510 and OnView are registered  trademarks of ViewSonic 
Corporation. 
VESA and SVGA are registered  trademarks of the Video Electronics Standards Association. 
DPMS and DDC...

ViewSonic  PJ5102
Features
Projector Features
This multimedia projector is used to project various computer signals as well as NTSC/PAL/
SECAM video signals onto a screen. Little space is required for installation and large images can 
easily be realized.
Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and highly 
efficient optical system.
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing....

3ViewSonic  PJ510
Part Names
The Projector
Projector (Front/Right)
Fastening The Lens Cap
To avoid losing, please fasten the lens cap to the projector using the strap.
1Fix the strap to the strap ring of lens cap, as the right drawing.
2Put one piece of the strap into the groove on rivet, as the right drawing. 
3Push the rivet into the strap hole. 
Zoom knob
Lens cap
Focus ring
Lens
Elevator feet Elevator buttonRemote sensorAir filter cover
(An air filter is 
inside)
Lens capStrap ring
St r a p
Pull...

ViewSonic  PJ5104
Projector (Rear/Left)
POWER indicator 
tells the state of power sup-
ply. Refer to the section 
“Turning On/Off Power”.
STANDBY/ON button  
prepares for turning the power 
on/off. Refer to the section 
“Turning On/Off Power”.INPUT button 
toggles between 
the signal ports.
AUDIO R port
AUDIO L port
(from a video equipment) TEMP indicator
lights or blinks when any 
problem about internal 
temperature has 
happened
.
LAMP indicator 
lights or blinks when 
any problem about the 
lamp has...

5ViewSonic  PJ510
The Remote Control
RGB button 
selects the input signal 
of RGB port.SEARCH button
searches for an input 
signal between the 
following signal ports of 
RGB, VIDEO, S-VIDEO 
and COMPONENT 
VIDEO. AUTO button
executes automatic 
adjustment
(STANDBY/ON) button
prepares for turning the 
power on/off.
BLANK button
blanks the screen 
temporarily.
VOLUME button
turns on/off the VOLUME 
mode.
In the VOLUME mode,
To adjust the volume,
use the cursor (S)/(T) 
buttons.
MUTE button
mutes/restores...

ViewSonic  PJ5106
Setting Up
Arrangement
Refer to the illustrations and tables below to determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen: 800x600
a Distance from the projector to the screen (±10%)
b Distance from the lens center to the bottom of the screen (±10%)
c Distance from the lens center to the top of the screen (±10%)
Reference for the 4:3 aspect ratio
Reference for the 16:9 aspect ratio
 WA R N I N G
• Install the projector in...

7ViewSonic  PJ510
Adjusting The Projector’s Elevator
You can use the elevator feet to make adjustments if the surface on which you need to set the 
projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range 
of the elevator feet is 0 to 9 degrees.
1Press and hold in the elevator buttons.
2Raise or lower the projector to the desired height and 
then release the elevator buttons. When you release the 
elevator buttons, the elevator feet will lock position.
3As...