Vivitar Dp 1200x Projector User Manual
Have a look at the manual Vivitar Dp 1200x Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Vivitar manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EN-20
○○○○○○○○○○○
User’s Manual Projector
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
c cc c
c or
d dd d
d button to select
PICTURE menu.
3.To enter the sub-menu setting, press the
MENU button once again.
4.Press the
c cc c
c or
d dd d
d button to select the
sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the value of desired sub-menu item.
On the Auto Tracking sub-menu, press the
f ff f
f button to confirm the selection.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Description
Brightness The higher the setting, the brighter the image.
The lower the setting, the darker the image.
Contrast The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
PosiH Adjusts the horizontal position.
PosiV Adjusts the vertical position.
Tracking Adjusts the horizontal pixel of the image.
Sync Adjusts the dot phase of the input signal.
Adjusts the picture to where it looks best.
Sharpness The higher the setting, the sharper the image.
The lower the setting, the softer the image.
Auto Tracking Automatically scans the projected image to fine tune.
EN-21
○○○○○○○○○○○
. English .
User’s ManualProjector
Color Menu
This menu provides precise control of the color settings including:
color temperature (preset & user define) and gamma.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
c cc c
c or
d dd d
d button to select
COLOR menu.
3.To enter the sub-menu setting, press the
MENU button once again.
4.Press the
c cc c
c or
d dd d
d button to select the
sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the value of desired sub-menu item.
On the Color Temp and Gamma sub-menus, press the
e ee e
e or
f ff f
f button to select
the desired setting.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Option Description
Color Temp Adjusts the whiteness of the screen.
L Gives the white colors a red tint.
M Gives the white colors a neutral tint.
H Gives the white colors a blue tint.
U Manually adjusts color temperature.
User R Manually adjusts red.
User G Manually adjusts green.
User B Manually adjusts blue.
Gamma Selects a gamma correction curve.
Gamma1 Improves computer’s image mode.
Gamma2 Improves video’s image mode.
EN-22
○○○○○○○○○○○
User’s Manual Projector
PIP Menu
This menu enables you to adjust the PIP (additional video image window on the
graphics background) settings such its size, position (horizontal & vertical), brightness,
contrast, saturation, tint, sharpness and source selection.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
c cc c
c or
d dd d
d button to select PIP
menu.
3.To enter the sub-menu setting, press
the MENU button once again.
4.Press the
c cc c
c or
d dd d
d button to select the
sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the value of desired sub-menu item.
On the Size and Input sub-menus, press the
e ee e
e or
f ff f
f button to select the
desired setting.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
EN-23 ○○○○○○○○○○○ . English . User’s ManualProjector The following table provides detail of the available sub-menu choices: Sub-MenuOptionDescription SizeSets the PIP size. Off No additional image window on the screen. SmallAdditional image window size sets to small. MediumAdditional image window size sets to medium. LargeAdditional image window size sets to large. PosiHAdjusts the additional image window horizontal position. PosiV Adjusts the additional image window vertical position. BrightnessThe higher the setting, the brighter the picture. The lower the setting, the darker the picture. Contrast The higher the setting, the greater the contrast. The lower the setting, the lower of contrast. Saturation The strength of a color especially the degree to which it lacks its complimentary color. The higher the setting, the stronger color strength. The lower the setting, the weaker color strength. Tint Adjusts shade and variety of the picture between red color and green color. SharpnessThe higher the setting, the sharper the picture. The lower the setting, the softer the picture. Input Scans the PIP source. Auto Automatically scans the input source. VideoPIP source from composite video signal. S-VideoPIP source from S-video signal.
EN-24
○○○○○○○○○○○
User’s Manual Projector
Audio Menu
This menu allows you to control volume and mute(on/off) the audio.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
c cc c
c or
d dd d
d button to select
AUDIO menu.
3.To enter the sub-menu setting, press
the MENU button once again.
4.Press the
c cc c
c or
d dd d
d button to select the
sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the value of desired sub-menu item.
On the Mute sub-menu, press the
e ee e
e or
f ff f
f button to select the desired setting.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-MenuOptionDescription
Volume Adjusts the volume.
Mute Cuts off the sound temporarily.
On Mute function is active.
Off Mute function is inactive.
MISC Menu
This menu includes projector utilities for keystone(vertical & horizontal), freeze frame
(on/off), blank screen(on/off), and blank color mode settings.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
c cc c
c or
d dd d
d button to select MISC
menu.
EN-25
○○○○○○○○○○○
. English .
User’s ManualProjector
3.To enter the sub-menu setting, press the MENU button once again.
4.Press the
c cc c
c or
d dd d
d button to select the sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the value of desired sub-menu item.
On the Freeze, Blank and Blank Color sub-menus, press the
e ee e
e or
f ff f
f button to
select the desired setting.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-MenuOptionDescription
V-Keystone Adjusts trapezoidal distortion (vertically) of the
picture that may occur depending the projection
angle.
H-Keystone Adjusts trapezoidal distortion (horizontally) of the
picture that may occur depending the projection
angle.
Freeze Freezes the screen.
On Freeze function is active.
Off Freeze function is inactive.
BlankBlanks the screen temporarily.
On Blank function is active.
Off Blank function is inactive.
Blank ColorSelects the screen color when Blank is active.
BlueBlanks to blue screen.
BlackBlanks to black screen.
Option Menu
This menu includes projector utilities for OSD timeout, OSD position (horizontal &
vertical), projection mode, auto off (On/Off) and lamp life.
Changing settings procedure (using either the Projector Control Panel or the
Remote Controller):
1.Press the MENU button to display OSD menu.
2.Press the
c cc c
c or
d dd d
d button to select OPTION menu.
3.To enter the sub-menu setting, press the MENU button once again.
EN-26
○○○○○○○○○○○
User’s Manual Projector
4.Press the
c cc c
c or
d dd d
d button to select the sub-menu item.
5.Press the
e ee e
e or
f ff f
f button to adjust the
value of desired sub-menu item.
On the Projection and Auto Off
sub-menus, press the
e ee e
e or
f ff f
f button
to select the desired setting.
On the Lamp Life sub-menu, the
lamp’s lifetime counter is calculated by
the projector system.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
c cc c
c or
d dd d
d button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Option Description
OSD Timeout Duration OSD menu stays active (at idle state).
OSD PosiH Adjusts OSD menu display position
(horizontally - left & right) on the screen.
OSD PosiV Adjusts OSD menu display position (vertically - up
& down) on the screen.
Projection Sets the projection display.
FrontThe image is projected directly on the screen.
RearThe image is reversed horizontally.
Ceiling The image is inverted vertically.
Auto Off Automatically turns off the lamp if the projector does
not detect an input signal for specified time period
(30 minutes).
On Auto Off is active.
Off Auto Off is inactive.
Lamp Life Displays lamp’s lifetime counter (by hour).
EN-27 ○○○○○○○○○○○ . English . User’s ManualProjector Language Menu This menu enables you to select the language used in the OSD(on-screen display) menus. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu. 2.Press the c cc c c or d dd d d button to select LANGUAGE menu. 3.To enter the sub-menu setting, press the MENU button once again. 4.Press the c cc c c or d dd d d button to select the desired OSD language. 5.Press the f ff f f button to confirm the OSD language selection. 6.To exit from the current menu, toggle the MENU button. Note: This projector supports multilanguage. Reset Menu This menu allows you to restore all projector settings and adjustments back to the factory defaults. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu. 2.Press the c cc c c or d dd d d button to select RESET menu. 3.To enter the sub-menu setting, press the MENU button once again. 4.Press the c cc c c or d dd d d to select YES if you want to restore all projector settings to the factory defaults. 5.Press the f ff f f button to confirm the selection. 6.To exit from the current menu, toggle the MENU button.
EN-28 ○○○○○○○○○○○ User’s Manual Projector Other Related OSD Menus Following are the descriptions on the on-screen display menus with video input sources and without input source attached to your projector. Video Input Signal If the input signal comes from composite video(video), S-video or component video (YCbCr), you may see different PICTURE menu and VIDEO menu interface. Picture Menu This menu provides precise control of the projected image including: brightness, contrast, saturation, tint and sharpness(video signal). Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu. 2.Press the c cc c c or d dd d d button to select PICTURE menu. 3.To enter the sub-menu setting, press the MENU button once again. 4.Press the c cc c c or d dd d d button to select the sub-menu item. 5.Press the e ee e e or f ff f f button to adjust the value of desired sub-menu item. 6.After you have done with the adjustment of a sub-menu item: a.To resume changing another sub-menu item: press the c cc c c or d dd d d button. b.To exit from the current menu: toggle the MENU button.
EN-29 ○○○○○○○○○○○ . English . User’s ManualProjector The following table provides detail of the available sub-menu choices: Sub-MenuDescription Brightness The higher the setting, the brighter the image. The lower the setting, the darker the image. Contrast The higher the setting, the greater the contrast. The lower the setting, the lower the contrast. Saturation The strength of a color especially the degree to which it lacks its complimentary color. The higher the setting, the stronger color strength. The lower the setting, the weaker color strength. TintAdjusts the projection between red and green color. Sharpness The higher the setting, the sharper the image. The lower the setting, the softer the image. Video Menu This menu enables you to adjust the video settings such as its aspect ratio and video format. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu. 2.Press the c cc c c or d dd d d button to select VIDEO menu. 3.To enter the sub-menu setting, press the MENU button once again. 4.Press the c cc c c or d dd d d button to select the sub-menu item. 5.Press the c cc c c or d dd d d button to select the desired setting. 6.After you have done with the adjustment of a sub-menu item: a.To resume changing another sub-menu item: press the c cc c c or d dd d d button. b.To exit from the current menu: toggle the MENU button.