Vivitar V10b User Manual

							 13. Click Finish to complete the installation       5.4 Installation of Vivicam TWAIN Driver and AVI Maker  on Windows XP ( If you plug-in your Digital Camera  
first without installing drivers. Please follow the steps  to complete of installation for Digital Camera. ) 
1.Insert the CD installation disk into your CD-ROM drive. 
2.When the Found New Hardware Wizard window appears.   Please select Install from a list or specific location  
[Advanced], and click Next to continue.  
Click on the utility software you wish to install.   
						

							 6.Transferring Images To Your Computer 
Once you have TWAIN driver and utility software installed,  you may start downloading pictures from your Vivicam.  6.1 Connecting Vivicam to PC 
Use the USB cable to connect camera to your computer.  
   VIVICAM10              Computer 
6.2 Windows will complete the following USB device      setup:       - Dual-Mode DSC (Controller)       - Dual-Mode DSC (Video Camera)       - Dual-Mode DSC (Still Camera) 
6.3 Transferring Images From Vivicam 10      1. Open  Photo lmpression 2000  application software.     2. Click   Get Photo  button.     3. Click   Camera/Scanner  button and the   Select        Source  list appears.     4. Select  Vivicam 10&20       5. Choose the destination album for your pictures from         the  Select Album  list.  
						

							    
6. Click  Acquire  button and the Vivicam TWAIN   software window opens. 
7. The pictures you have taken will automatically display in    the TWAIN window. 
8. Choose pictures that you want or click  Select All  to   select all pictures then click  Transfer  button.  
    
						

							   
6.4 Create AVI Video File from AVI Maker     1. Use the  Continuous Capture Mode of Vivicam to        take sequential images.     2. Connect your Vivicam to PC with USB cable and start        the AVI maker from Windows programs menu.    
3. AVI Maker will automatically read the continuous 
pictures from Vivicam and will show the following 
window:     
         
						

							  4. Select the desired compression quality and click on 
Create. Select a name for the AVI file and click on Save 
to create the AVI. 
  
5. The new AVI video file will automatically show on the 
Windows Media Player!   
      
						

							  7. Using the Vivicam as a PC Camera 
 
You can connect Vivicam 10 to your computer and use 
it as a PC camera. 1. Connect USB cable to Vivicam and to your PCs USB port.    The LCD panel on the camera will show . 
2. Please refer to related instructions for using the camera      as a PC camera if your PC already has PC camera 
    soffware installed. 
    (select  Vivicam 10&20  if the software has video 
capture source list.) 
 
lmportant Note: 
Do not disconnect the USB cable while you are  
using your Vivicam as a PC camera.  This may 
cause a function failure. 
 
 
   
						

							  SUPPLEMENT 
 
If you plug-in your Digital Camera without first installing the drivers - Please follow the steps to complete the installation.1.Insert the CD installation disk into your CD-ROM drive. 
2.When the Found New Hardware Wizard window appears.      Please select Install from a list or specific location       [Advanced], and click Next to continue..  
3. When the following window appears.  
  Please select Search removable media [floppy, CD- 
  ROM...] , and click Next to continue. 
 
 
 
      
						

							  
 
4.System files are copied and then the following screen  
  appears. Click Finish to continue the installation. 
    
						

							  5.Next, the Found New Hardware Wizard window appears   again. Select Install from a list or specific location  
  [Advanced], and click Next to continue. 
  
 
6. When the following window appears, select Search 
removable media [floppy, CD-ROM ...], click Next 
to continue. 
  
 
   
						

							  7. System files are copid and then the following screen  
  appears.  Please click Finish to continue the installation. 
  
 
8. Please double click the CD drive icon in My Computer  
  and run InstallMgr.exe in the root directory of the CD.  
  
9. Click Install VIVICam Twain Driver on the  
  Software Installer dialogue box, and follow the  
  instructions to complete the installation. Setup will 
finish installing the necessary files on your computer. 
It will prompt you to restart your computer. Click 
Yes and then Finish to restart your computer and to 
complete Setup.