Vivitar Vivicam 3345 User Manual

  
 
ViviCam 3345 
 
  
 
 
1.3 Mega Pixel Digital Camera 
  
Owner’s Manual  
 
 
 
 
   

  
  ViviCam 3345 User Manual 
This manual is designed to assist you in using the ViviCam 3345.  Information in this document has been carefully 
checked for accuracy; however, no guarantee is given to the absolute correctness of the contents.  The information 
in this document is subject to change without notice. © Copyright 2004 Vivitar Corporation.   
Federal Communications Commission (FCC) Compliance 
This equipment has been tested and found to comply with the limits for a Class B digital device,...

  
  ViviCam 3345 User Manual - Table of Contents 
GENERAL INFORMATION.........................................................................................................................4 
COMPUTER SYSTEM REQUIREMENTS...........................................................................................................4 
PACKAGE CONTENTS.................................................................................................................................4 
GETTING...

  
  
GENERAL INFORMATION 
 
Computer System Requirements 
The ViviCam 3345 is designed to work with your home or office computer.  To ensure proper operation your 
computer must meet the following requirements: 
 
· Pentium II Class 400 MHz processor 
· Windows® 98SE/ME/2000/XP 
· 128MB RAM 
· 300 MB free hard disk space 
· USB port 
· CD-ROM drive 
 
Package Contents 
Open the ViviCam 3345 package and examine the contents.  Your package should contain the following items.  
Note, however, that items...

  
 5GETTING STARTED 
Camera Features 
Please refer to the following diagrams to identify the features of the ViviCam 3345: 
Front View 
  
Rear View 
 
  
 
 
 
 
 Power/Mode 
Button Lens Flash    USB port   Viewfinder   Self-timer LED  Shutter button Battery Compartment 
SD/MMC Card slot 
(inside) Select Button   Viewfinder  Status LCD   

  
 6 
 
 
 
Inserting and Removing an SD or MMC Memory Card 
The ViviCam 3345 accepts a Secure Digital (SD) or a MultiMedia Card (MMC) memory card up to 256MB 
capacity.  The memory card takes priority over the internal memory.  Whenever a memory card is inserted the 
camera will immediately use the memory card in preference to the internal memory.  Therefore, when a memory 
card is inserted, the camera will store images and videos on the memory card.  Likewise, the camera will 
playback images and...

  
 7USING THE VIVICAM 3345 
Powering the Camera ON/OFF 
· To turn the ViviCam 3345’s power ON, press and hold the  button for three to four seconds.  The 
camera will beep and the status LCD will display camera status information. 
· To turn the ViviCam 3345’s power OFF, press and hold the  button for three (3) seconds and the 
status LCD will shut off.   Note: The ViviCam 3345 automatically powers off after 60 seconds of inactivity. Camera Icons and Descriptions...

  
 8 The Select Button    Icon Descriptions  Automatic Flash:  The flash will fire if there is insufficient ambient light 
Note: The flash icon blinks when the flash capacitor is charging.  Wait for the icon 
to stop blinking before capturing an image.  Flash OFF: The flash will not fire in any lighting condition  Flash ON: The camera will flash regardless of lighting conditions  Indoor Exposure: For taking images indoors  Outdoor Exposure: For taking images outdoors  Delete ALL:  Deletes all images...

  
 9 
Using the Flash 
1. Press the  button to select the desired resolution. 
2. Press the Select () button to toggle through the following options and select your desired flash 
and exposure settings: 
Flash OFF/Outdoor ? Auto flash/Outdoor ? Flash OFF/Indoor ? Auto flash/Indoor ? Flash 
ON/Indoor ? Flash ON/Outdoor.   
3. Frame your subject through the viewfinder. 
4. Hold the camera steady and press the Shutter button firmly to capture an image. 
Note: 
· If the flash is charging , the flash icon on...

  
 10 Recording Digital Video 
1. Press and hold the  button for three to four seconds to power on the camera.   
2. Press the  button four times to the Movie icon .  
3. Press the Select () button to select the desired exposure setting: 
Indoor or Outdoor   
4. Frame your subject through the viewfinder and press the Shutter button once to start recording. The 
video icon  will blink continuously while the camera is recording a video. The status LCD will 
display the time remaining (in seconds) for the...