Vivitar Vivicam 3345 User Manual

  
 11 
3. To return to the main screen without deleting any file, press the Select button twice. DO NOT press 
the Shutter button.  
Deleting All Images and Videos  
1. Press and hold the Select  button for one second.  The Delete Last icon will appear on the 
status LCD. Toggle to the Delete ALL  icon by pressing the Select  button again.   
2. Press the Shutter button to delete ALL images and videos stored in the memory. The camera will 
beep to confirm that all files have been deleted from memory....

  
 12INSTALLING SOFTWARE 
Software Overview and Features 
The following software and drivers are included on the CD to enhance your digital imaging experience. (The 
ViviCam 3345 Driver is used only for Windows 98SE users.)  Windows ME, 2000, and XP users can connect 
their 3345 camera directly to their computer with the supplied USB cable and download their images and videos 
without installing any software or drivers whatsoever.  
Note:  Windows 98 users must install the driver software before...

  
 13 Move your cursor over the software that you want to install on your computer, and click it once to begin the 
installation.  Follow the on-screen instructions below to complete installing your software. 
When installing the ViviCam 3345 driver, a progress screen will 
appear: 
 
Click “Next” to start the installation.  
Wait for the application to install on your computer. When the installation is completed, the computer 
prompts you to reboot your system.  Select “Yes, I want to restart my...

  
 14MAKING CONNECTIONS 
Connecting to your PC 
After the software installation is completed, connect the ViviCam 3345 to the computer to download the images 
and videos.  Follow these steps: 
1. Power OFF the camera.   
2.  Plug the small end of the USB cable into the USB port on the ViviCam 3345. 
3. Plug the larger end of the USB cable into the USB port of your computer. 
4. The PC will detect a new hardware upon connection, and the camera will automatically 
power on. 
5 
The camera will display  in...

  
 15 DOWNLOADING IMAGES AND VIDEOS TO YOUR PC 
Downloading Using the Mass Storage function 
Windows 98SE Users.  The driver installation must be completed before downloading files from the ViviCam 
3345 to the computer.    
1. Connect the ViviCam 3345 to your computer. 
2. The ViviCam 3345 uses the USB “Mass Storage” approach so the computer will 
automatically detect the camera as a removable disk.   
For Windows XP, the Windows Wizard will launch (shown below). Select the desired operationoffered by...

  
 16  
Camera Maintenance 
Caring for Your Camera  
Do not store or use the camera in the following environments: 
· Very humid, dirty or dusty places 
· In direct sunlight or in places subject to extreme temperatures, such as in a closed car during 
summer 
· Extremely cold places 
· Places that are subject to strong vibrations, smoke, or steam 
· Places that are subject to strong magnetic fields (near motors, transformers or magnets) 
· Places with chemicals such as pesticides or next to rubber or...

  
 17PRODUCT SPECIFICATIONS 
  
Image sensor 1.3 Mega Pixel sensor 
Internal memory 8 MB built-in flash memory 
Image resolution  Superfine 1
  Fine                    Economy 
Image resolution 1600 x 1200 1280 x 1024                 640 x 480 
Image capacity 2
 8 images 12 images                  49 images 
Video resolution 320 x 240 
Video frame rate Variable, typically up to 8 fps 
Video capacity 2
 Up to 28 seconds (no audio) 
File format JPEG (still images), AVI (video clips – no audio) 
Exposure...

  
 18TROUBLESHOOTING  
 
If any problems arise with the ViviCam 3345, refer to this troubleshooting chart: 
  
Symptom Possible cause Solution The battery is drained. Change or recharge the battery. Also, 
check for correct polarity (orientation) of 
the batteries. The camera doesn’t turn on. Power button must be pressed for 3 to four seconds Press and hold the Power button until 
“ON” appears in the status display Is the camera turned on? The camera powers off automatically after 60 seconds. Make sure...