Vivitek D5000 User Manual

							
DLP Projector—User’s Manual 
– 24 – 
 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control cursor buttons or  the buttons on the top of the projector to navigate 
and make changes to the OSD. The following illustration shows the corresponding buttons on the 
projector. 
 
1.  To enter the OSD, press the  MENU  button.  
2.  There are five menus. Press  the cursor  ◄► button to 
move through the menus.  
3.  Press the cursor  ▲▼ button 
to move up and down in a 
menu.  
4. Press  ◄► to change values 
for settings. 
5. Press  MENU
 to close the 
OSD or leave a submenu. 
Note: 
Depending on the video source, not all items in the OSD are available. For example, the  Horizon-
tal/Vertical Position items in the Computer menu can only be modified when connected to a PC. 
Items that are not available cannot be accessed and are grayed out.  
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector – User’s Manual 
– 25  – 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the  MENU button. Press the cursor  ◄► button to navigate to Installation I. 
 
2.  Press the cursor  ▲▼ button until  Language is highlighted.  
 
3.  Press the cursor  ◄► button until the language you want is highlighted.  
4. Press the  MENU button twice to close the OSD.   
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector—User’s Manual 
– 26 – 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector – User’s Manual 
– 27  – 
OSD Sub-Menu Overview 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector—User’s Manual 
– 28 – 
Image Menu  
Press the  MENU
 button to open the  OSD
 menu. Press the cursor  ◄► button to move to the  Image
 
Menu . Press the cursor  ▲▼ button to move up and down in the  Image
 menu. Press  ◄► to change 
values for settings. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor  ◄► button to set the Display Mode.  
Brilliant Color  Press the cursor  ◄► button to adjust the Brilliant Color value. 
Brightness Press the cursor  ◄► button to adjust the display brightness. 
Contrast Press the cursor  ◄► button to adjust the display contrast. 
Sharpness Press the cursor  ◄► button to adjust the display sharpness level. 
Gamma Press the cursor  ◄► button to adjust the gamma correction of the display.  
Advanced Press  (Enter) /  ► to enter the Advanced menu. See  Advanced Feature on page 29. 
Reset Press  (Enter) / ► to reset all settings to default values. 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector – User’s Manual 
– 29  – 
Advanced Feature 
Press the  Menu
 button to open the  OSD
 menu. Press  ◄► to move to the  Image
 menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Color Space   Press the cursor ◄►
 button to adjust the color space.  
(Range: Auto – RGB – YPbPr – YCbCr)  
Color Temperature   Press the cursor ◄►
 button to adjust the color temperature.  
(Range: Cold – Normal – Warm) 
Color Manager   Press  (Enter) / 
► to enter the color manager menu. (Range: Red-Green-Blue-Cyan-
Magenta-Yellow-White). See page 30 for more information on  Color Manager.  
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector—User’s Manual 
– 30 – 
Color Manager 
Press  (Enter) /  ► to enter the  Color Manager
 sub menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta  Select to enter the Magenta Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow  Select to enter the Yellow Color Manager.  
Press the
◄► buttons to adjust the Hue, Saturation, and Gain. 
White  Select to enter the White Color Manager.  
Press the 
◄► buttons to adjust the Red, Green, and Blue. 
 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector – User’s Manual 
– 31  – 
Computer Menu  
Press the  MENU
 button to open the  OSD
 menu. Press the cursor  ◄► button to move to the  Com-
puter  menu. Press the cursor  ▲▼ button to move up and down in the computer menu. Press  ◄► to 
change values for settings. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the cursor  ◄► button to adjust the display position to left or right.  
Vertical Position  Press the cursor  ◄► button to adjust the display position to up or down.  
Frequency Press the cursor  ◄► button to adjust the A/D sampling clock. 
Tracking Press the cursor  ◄► button to adjust the A/D sampling dot. 
Auto Image  Press  (Enter) /  ► to automatically adjustment for phase, tracking, size and position. 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector—User’s Manual 
– 32 – 
Video/Audio Menu  
Press the  MENU
 button to open the  OSD
 menu. Press the cursor  ◄► button to move to the  
Video/Audio  menu. Press the cursor  ▲▼ button to move up and down in the  Video/Audio
 menu. 
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Video AGC  Press the  ◄► buttons to enable or disable the Automatic Gain Control for video source. 
Video Saturation  Press the  ◄► buttons to adjust the video saturation. 
Video Tint  Press the  ◄► buttons to adjust the video tint/hue. 
Film Mode  Press the  ◄► buttons to select a different film mode.  
Video Overscan  Press the  ◄► buttons to enable or disable video over scan. 
Closed Captioning  Press the  ◄► buttons to enable or disable Closed Captioning 
Audio Press  (Enter) /  ► to enter the Audio menu. See  Audio on page 33. 
Reset Press  (Enter) /  ► to reset all settings to default values. 
 
Note: 
Video jagging may occur when playing interlace video. To overcome this issue, open the  
Video / Audio menu and adjust the Film Mode feature.  
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
DLP Projector – User’s Manual 
– 33  – 
Audio 
Press  (Enter) /  ► to enter the  Audio
 sub menu. 
 
ITEM DESCRIPTION 
Volume  Press the 
◄► buttons to adjust the audio volume.  
(Range: 0~8) 
Mute Press the  ◄► buttons to turn on or off the speaker. 
 
 
Downloaded From projector-manual.com Vivitek Manuals