Vizio E390i-A1 HDTV User Manual

5
25
Resetting the Picture Settings 
To reset the picture settings to the factory default settings:
1 . From the Picture Settings menu, use the Arrow buttons to 
highlight  More, then press OK.
2 .  Use the Arrow buttons on the remote to highlight Reset 
Picture Mode, then press OK. The TV displays, “Are you sure 
you want to RESET Picture Settings to the factory defaults?”
3 .  Highlight  Ye s and press OK.
4 .  Press the EXIT button on the remote.  

5
26
adjuStiNg the audiO SettiNgS
To adjust the audio settings:
1 .  Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Audio and 
press  OK. The Audio  Settings 
menu is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
• Balance - Adjusts the 
loudness of the audio 
output from the left and 
right speakers.
•  Lip Sync - Adjusts the syn-...

5
27
Adjusting the Advanced Audio Settings
To adjust the advanced audio settings:
1 .  From the Audio Settings Menu, 
use the Arrow buttons to 
highlight  Advanced Audio, 
then press OK. The Advanced 
Audio menu is displayed.
2 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
• Digital Audio Out - 
Changes the type of 
processing for the Optical 
output when connected 
to a home theater audio 
system. Select Off, Dolby 
Digital,...

5
28
uSiNg the NetwOrk cONNectiON MeNu
Your TV is internet-ready, featuring both an Ethernet port and 
built-in high-speed Wireless-N.
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is 
being broadcast:
If your TV is connected to a network with an 
Ethernet cable, you will not see the wireless network 
connection menu. You must disconnect the Ethernet 
cable to set up a wireless network connection.
1 . Press the MENU button on the 
remote. The on-screen menu...

5
29
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the 
Manual Setup feature.
To change advanced network settings:
1 .  From the Network Connection 
menu, highlight Manual Setup  
and press OK. The  Change 
Settings menu is displayed.
2 .  Use the Arrow and OK buttons 
to adjust each setting:
• DHCP - (Dynamic Host 
Configuration  Protocol) This 
setting must be turned Off 
to change any of the other 
settings.
•  IP Address - The IP address 
assigned to...

5
30
chaNgiNg the tv  SettiNgS
Using the settings menu, you can:• Change the input source
•  Adjust the Tuner settings
•  Name the TV inputs
•  Set up parental controls
•  Change the on-screen 
menu language
•  Set the time
•  Adjust the CEC settings
•  Adjust the Power Indicator 
settings
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Settings
Input Source TV
Tuner
Name Input
Parental Controls
Menu Language English
Time & Local Settings...

5
31
Setting the Tuner Mode
If you are using a device that is connected to the RF input, such 
as an external antenna or cable TV connection, you must set the 
tuner mode.
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight the 
Settings icon and press OK. The Settings menu is displayed.
3 .  Highlight  Tuner and press OK. The Tuner Mode menu is 
displayed.
4 .  Highlight  Antenna or Cable and press OK.
5 .  Press the EXIT...

5
32
Adding New Channels
Occasionally, you may need to add a new analog channel or 
add a new range of channels. You can do this by using the Partial 
Channel Search and Add Analog Channel options.
To add a range of new channels:
1 . From the Tuner menu, highlight Partial Channel Search. T h e  
Partial Channel Search menu is displayed.
2 .  Highlight  Scan Mode and select the type of channel you 
are adding: Analog/Digital, Analog, or Digital.
3 .  Highlight  From Channel and enter the channel from...

5
33
Skipping Channels
After a channel scan is completed, you may find that some 
channels are too weak to watch comfortably. There may also be 
some channels you do not want to view. You can remove these 
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip 
Channel feature can still be viewed if the channel 
is entered using the Number Pad. If you wish to 
completely block a channel from being viewed, use 
the parental controls. See 
 on page 34.
To...

5
34
To use the Digital MTS feature:
1 . From the Tuner Settings menu, 
highlight  Digital MTS and press 
OK. The  Digital MTS menu is 
displayed.
2 .  Select your preferred language: 
English,  French, or Spanish. 
Press  OK.
3 .  Press the EXIT button on the 
remote.  
Help
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Digital MTS
EnglishFrench
Spanish
Using the Parental Controls
The TV’s parental controls allow you to prevent the TV from...