Vodavi Infinite Gk-816 Installation Manual

Infinite 816 Key Telephone System INSTALLATION 
F’igure 500-12 SLA Mounting Dimensions 
I : 
A L 
r 
---.50” 
i 
7.50” 
I 
Issue I, January 1992 500-23  

INSTALLATION Infiite 816 Key Telephone System 
NE 
I 
I 
SL2 KSU “SISTER” STATION PORTS 
PORT 03 STA 03 STA 15 PORT 15 STA 15 STA 24 
‘~1 
PORT041 STAO4 1 STAla It-L 
PORT051 STA05 1 STA14 IPC 12/24 1 
. _... -. 
PORT 08 1 STA 08 1 STA 17 IPORT 20 I 1 STA29 
PORT 09 I STA 09 I STA 18 IPORT 21 I 1 STA30 
PORT 10 STA 10 STA 19 PORT22 STA 31 
PORT11 STAll STA 20 PORT 23 STA 32 
PORT 12 STA 12 STA 21 PORT 24 STA 33 
SLA Input 1 must be used 
as the first or lowest num- 
bered station connected 
r 
Figure...

Infinite 816 Key Telephone Systems POWER UP AND SYSTEM CHECKOUT 
SECTION 600 
POWER UP AND SYSTEM CHECKOUT 
600.1 POWER-UP AND INSTALLATION 
CHEcasT 
Prior to actual power-up and initialization. the 
Injii 816 Key Telephone System should be 
checked over to avoid start up 
delays or im- 
proper loading. The following checklist is pro- 
vided 
for this purpose: 
a.. 
b. 
C. 
d. 
e. Make sure that the KSU is properly 
grounded according to the instn.rcUons in 
Paragraph 5.3. 
Inspect the MDF for shorted...

Infinite 82 6 Key Telephone System CUSTOMER DATA BASE PROGIMkMfNG 
SECTION 700 
CUSTOMER DATA BASE PROGNiMMIJYG 
700.1 INTRODUCXION 
The In.@& 8 16 Key Telephone System can be 
programmed to meet each customers individ- 
ual needs. All progmmming is done at station 
0 1 (port 0 1) using the Enhanced (non-display) 
or Executive (display) Key Telephone as the 
programming instrument. 
When the Programming mode is entered, the 
Key Telephone being used no longer operates 
as a telephone but as a programming...

CUSTOMER DATA EASE PROGRAMMING Infinite 816 Key Telephone System 
Table 700-l Default Values 
FEATURE 
Station ConQuration 
Station Class of Service 
Station Features 
Do Not Disturb 
System Speed Dial 
Alarm/Phone Box Signal 
Preferred Line Answer 
Call Forward 
Auto Select 
Headset 
Flexible Station Numbers 
CO Line 
Access 
Page/Pickup Groups 
CO Line Configuration 
CO Line Groups 
CO Line Features 
Line Type 
Line Signaling 
Toll Override 
Private Line 
CO Line Ringing (Day) 
CO Line Ringing (Night)...

In.nite 816 Key Telephone SPtem CUSTOMER DATA BASE PROGIUMMNG 
Table 70@1 Default Values (Cont’dl 
FEATURE 
Conference Timer 
SMDR 
SMDR/CallType 
SMDR/Baud Rate 
SMDR/F+rint Format 
Toll Table Allow 
A 
Toll Table Deny A 
Toll Table Allow B 
Toll Table Deny B ‘ROGFUM 
CODE 
34 
35 
36 
41 
42 
43 
44 
FLEX 
BUITQN 
1 
2 
3 DEFAULT VALUE 
5 minutes 
#nabled for all lines 
llfX3J.k 
00 Baud 
9 Characters 
ione Assigned 
lone Assigned 
ione Assigned 
lone Assigned 
Issue 1, 
January 1992 700-3  

CUSTOMER DATA BASE PROGRAMMING Infinite 82 6 Key Telephone System 
700.4 PROGRAM MODE ENl-XY 
Programm.ing is always 
done at station port 01 
using either the Enhanced or Executive Key 
Telephone. Programming is always done at 
this station regardless of the class of service 
or 
intercom number assigned to this station or 
which station has been assigned as the atten- 
dant. 
To enter the Pro gramming mode, the program- 
mer must first verify that the 
Key Telephone is 
properly connected to station...

Infinite 82 6 Key Telephone System STATION ATTRlBUTES PROGRAMMING 
SECTION 710 
STATION ATTRIBUTES PROGIZAMMING 
710.1 STATXON CLASS OF SERVICE 
gmmming Steps 
Description 
Make sure you have entered the programming Each station must be assigned a Class Of 
mode (See Paragraph 700.4). Service (COS) which governs that station’s out- 
To change the c&s of service of a station: going dialing privileges and toll restriction. 
a Dialanasterisk[*]and[OlIonthedialpad. The six classes of service are: 
b. Press...

STATION ATTRIBUI’ES PROGIUMMING hjinite 816 Key Telephone System 
Station Attributes Programming 
(Ccnt’d) 
710.2 STATION CONFIG~ION 
gramdng Steps 
lf the system is in the Programming mode. 
continue using program codes. If starting to 
program here. enter the Progr amming mode 
i&t (See Paragraph 700.4). 
To change station features: 
a Dial an asterisk [‘I and [02] on the dial pad. 
b. Press the button of the station to be pro- 
grammed. 
c. Then toggle 
on or off the followlng program 
button...