Whirlpool Cabrio User Guide

11
Cycle Guide
How do you want to wash?
“How to Wash” Cycle Selection
NormalQuickColdDeep WaterColorLast
• Powerful Soil      Removal• Regular
• Fast• Saving Water     & Energy• Cold Wash
• with Extra Water• “Conventional Style” More Water
• Protecting my colors• Protecting my fabrics• Gentle cleaning
What do you  want to wash?“What to Wash” Cycle Selection
Athletic/High  Performance Wear
Mixed
Raaaa
Bright ColorsaR
Cottons/LinensR
Dark ColorsaR
JeansRaaa
PajamasRaaaa
SweatshirtsRaaaa
Terry ClothRaa...

12
Using Your Washer — Basic Operation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,  
fire, or electrical shock.
W ARNING
•  Empty pockets. Loose change, buttons, or any small  object can pass under the washplate and become  trapped, causing unexpected sounds.
•  Sort items by recommended cycle, water temperature,  and colorfastness. 
• Separate...

13
6.  Add liquid fabric softener or Oxi  
to dispenser
Pour a measured amount of liquid fabric softener or  Oxi-type boosters into tray; always follow manufacturer’s directions for correct amount of fabric softener or Oxi based on your load size. Close dispenser drawer, then select Oxi option. Oxi is added during main wash and Fabric Softener  is added during rinse.
IMPORTANT: Oxi option must be selected to ensure proper distribution at correct time in cycle. Do not overfill or dilute. Overfilling...

14
First select and touch a setting from the  “What to Wash” menu and then select a  setting from the “How to Wash” menu  to get the best combination cycle available  for the type of items you are going to wash.  See “Cycle Guide” for cycle details. Not  all settings are available on all cycles.
The Time/Status display will light up with a cycle time. You may notice time adjusting during the cycle. This is normal.
8. Select type of load to wash
9. Select cycle modifiers
Once you select a cycle, the...

15
12.  Remove garments promptly  
after cycle is finished
Touch and hold the START/PAUSE button for 3 seconds to start the wash cycle.
When the cycle has finished, the end beep will sound (if set).  The Whirlpool™ app will send a “Clothes Clean Notification”  (if set). See “Using Your Washer — Smart Operation” on  page 16.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch the START/PAUSE button to pause the washer;  the lid will unlock once the washer movement...

16
Using Your Washer — Smart Operation
NOTE: You must have successfully completed the “Connectivity Setup” secti\
on on pages 9 and 10 for the following features  
to function. Verify that the Wi-Fi status indicator (    ) is illuminated. Check the\
 Whirlpool™ app for additional washer features,   
including Delay Start.
The Download & Go™ option lets you select and send a Specialty Cycle or My Cycle from the Whirlpool™ app directly to 
your washer. The indicator above Download & Go will illuminate....

17
WASHER CARE (cont.)
2. Chlorine Bleach Procedure (Alternative):
 a.   Open the washer lid and remove any clothing  or items.
 b.   Add 1 cup (236 mL) of liquid chlorine bleach  to the bleach compartment.
 NOTE: Use of more liquid chlorine bleach than is    recommended above could cause washer damage   over time.
 c. Close the washer lid.
 d.   Do not add any detergent or other chemical  to the washer when following this procedure.
 e.    Select the CLEAN WASHER cycle.
 f.  
Touch and hold the...

18
If moving, or not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding  due to water pressure surge.
NON-USE AND VACATION CARE
 
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer where it will not freeze. Because some water may stay in hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both...

19
Troubleshooting — Connectivity
First try the solutions suggested here or visit our website at www.whirlpool.com/connect.
If you experiencePossible CausesSolution
Washer is not connected to home Wi-Fi router  (Wi-Fi icon is OFF)
The washer may be in standby mode.Touch the POWER button on the washer and observe indicators.  All indicator lights are off when in standby mode.
The washer has never been connected to the home Wi-Fi router.See “Connectivity Setup” section.
The washer has been connected to the...

20
Troubleshooting — Washer Operation
If you experiencePossible CausesSolution
Vibration or Off-Balance
Vibration, rocking, or “walking”Feet may not be in contact with the floor and locked.Front and rear feet must be in firm contact with floor, and washer must be level to operate properly. 
Washer may not be level.Check floor for flexing or sagging. If flooring is uneven, a 3/4" \
 (19 mm) piece of plywood under your washer will reduce sound.
See “Level the Washer” in the Installation Instructions....