Xerox DocuPrint 255DN User Manual

Token Ring Menu
Chapter 1: Configuring the Printer
v1-75 AppSocket Bin PS
Enable or disable the AppSocket 
binary mode of PostScript.
The available values are:
On
Off*
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
AppSocket Bin PS
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:AppSocket Bin PS=
New Value
4. Press 
Enter. You will see:Token Ring Menu
AppSocket Bin PS
5. Press 
Online. You will see:Ready...

Token Ring Menu
1-76
vDocuPrint NC60 System Administrator Guide IP Address Res.
Set the method used to assign the IP 
address, including subnet mask and 
default gateway. The available values 
are:
Static
BOOTP/RARP
DHCP*1. Press 
Menu Up or 
Menu 
Down until you see:
Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
IP Address Res.
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:IP Address Res.=
New Value
4. Press 
Enter. You will see:Token Ring Menu
IP...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-77 IP Address
Set the four byte IP address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed IP address and 
Item 
Down moves the cursor to the left. 
This allows you to change characters 
within the string rather than having to 
reenter the entire string.
With the cursor displayed under a 
character, 
Va l u e  U p increments the 
value of...

Token Ring Menu
1-78
vDocuPrint NC60 System Administrator Guide Subnet Mask
Set the four byte Subnet Mask 
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed Subnet Mask address 
and 
Item Down moves the cursor to 
the left. This allows you to change 
characters within the string rather 
than having to reenter the entire 
string.
With the cursor displayed under a 
character, 
Va l u e  U...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-79 Default Gateway
Set the four byte Default Gateway 
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed Default Gateway 
address and 
Item Down moves the 
cursor to the left. This allows you to 
change characters within the string 
rather than having to reenter the 
entire string.
With the cursor displayed under a 
character, 
Va l u...

Token Ring Menu
1-80
vDocuPrint NC60 System Administrator Guide Port Timeout
Set the time for determining when to 
end an incomplete print job and poll 
the next port in the polling sequence.
The available values are:
5 - 300 seconds (60*
)
This item also causes an implicit job 
end such as Control D in PostScript or 
 E in PCL, and invokes the 
emulation functions associated with 
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1 
second each time either 
Va l u e  U p or...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-81 LAA
Set the six byte Locally Administered 
Address.
The valid values are:
xxxx xxxx xxxx
(where xxxx xxxx xxxx can equal any 
value within the valid range of 4000 0000 
0000 and 7FFF FFFF FFFF)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed LAA and 
Item Down 
moves the cursor to the left. This 
allows you to change characters 
within the string rather than having to 
reenter the entire string.
With the...

Token Ring Menu
1-82
vDocuPrint NC60 System Administrator Guide Source Routing
Select the Source Routing option.
The available values are:
On*
Off
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
Source Routing
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:Source Routing =
New Value
4. Press 
Enter. You will see:Token Ring Menu
Source Routing
5. Press 
Online. You will see:Ready
Speed
Select the Token Ring...

Novell Menu
Chapter 1: Configuring the Printer
v1-83
Novell Menu
Use the Novell Menu to modify Novell parameters. The 
menu hierarchy is shown in Figure 1.13. Items in italics 
appear only if Novell Enable is set to On.
Refer to Table 1.17 on page 1-84 for step-by-step 
instructions. Figure 1.13 Novell Menu hierarchy with factory settings
Novell EnableOn*
Off
PServer NameNovell PDL
Novell Binary PS
Novell Mode
Frame Type
Polling Interval
Job Menu
Password Menu
Tr a y  M e n u
PCL Menu
System Menu
Color...

Novell Menu
1-84
vDocuPrint NC60 System Administrator Guide
Table 1.17 Novell Menu functions
Menu Item and FunctionKeystrokesDisplay
Novell Enable
Enable or disable the Novell protocol.
The available values are:
On*
Off
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Novell Menu
2. Press 
Item Up or 
Item Down 
until you see:Novell Menu
Novell Enable
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:Novell Enable =
New Value
4. Press 
Enter. You will see:Novell Menu
Novell Enable
5. Press...