Xerox Phaser 4510DN User Manual

Printer Configurations
Phaser® 4510 Laser Printer
1-5
Available Configurations
The Phaser 4510 printer is available in four standard configurations.
Feature Printer Configurations
4510B 4510N 4510DT 4510DX
Maximum Resolution True
1200 x 1200Tr u e
1200 x 1200Tr u e
1200 x 1200Tr u e
1200 x 1200
Maximum Print Speed 45 ppm Letter, 43 ppm A4 (all configurations)
PostScript and PCL Fonts Standard Standard Standard Standard
Memory (MB)** 128 128 128 128
20 MB Flash Memory Optional Optional Optional Optional...

Printer Configurations
Phaser® 4510 Laser Printer
1-6
Options
You can order additional trays, memory, and a hard drive if these items are not standard on 
your printer. Print the Configuration page to see which options are installed on your printer. To 
print the Configuration page, see Information Pages on page 1-8.
Options include the following:
■550-Sheet Feeder (includes tray)
■550-Sheet Tray
■500-Sheet Stacker with Job Offset
■Duplex Unit
■Hard Drive - Provides additional printer features:
■Secure,...

Control Panel
Phaser® 4510 Laser Printer
1-7
Control Panel
This section includes:
■Control Panel Features on page 1-7
■Control Panel Layout on page 1-8
■Menu Map on page 1-8
■Information Pages on page 1-8
■Sample Pages on page 1-9
■Power Saver Settings on page 1-9
Control Panel Features
The control panel:
■Displays the printer’s operating status (for example, Printing, Ready to Print), printer 
errors, and warnings.
■Prompts you to load paper, order and replace supplies, and clear jams.
■Enables you to...

Control Panel
Phaser® 4510 Laser Printer
1-8
Control Panel Layout
Menu Map
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1.On the control panel, select 
Information, and then press the OK button.
2.Select 
Menu Map, and then press the OK button to print.
Note:Print the Menu Map to see other information pages available for printing.
Information Pages
Your printer comes with a set of information pages to help you obtain the best results from 
your printer. Access these...

Control Panel
Phaser® 4510 Laser Printer 1-9
1.
On the control panel, select 
Information, and then press the  OK button.
2. Select 
Information Pages, and then press the  OK button.
3. Select 
Configuration Page or Supplies Usage Page, and then press the  OK button to 
print.
Note: You can also print informatio n pages from CentreWare Inte rnet Services (IS) and from 
the printer driver.
Sample Pages
Your printer comes with a set of sample page s that demonstrate different printer functions.
To print...

More Information
Phaser® 4510 Laser Printer
1-10
More Information
This section includes:
■Resources on page 1-10
■Xerox Support Centre on page 1-11
Obtain information regarding your printer and its capabilities from the following sources.
Resources
Information Source
Installation Guide* Packaged with printer
Quick Use Guide* Packaged with printer
User Guide (PDF)*  Packaged with printer 
(Software and Documentation CD-ROM)
Warranty Packaged with printer
Advanced Features Guide...

More Information
Phaser® 4510 Laser Printer
1-11
Xerox Support Centre
The Xerox Support Centre is a utility that is installed during printer driver installation. It is 
available for printers with Windows 2000 and later or Mac OS X, version 10.2 and higher.
The Xerox Support Centre appears on the desktop for Windows printers or is placed in the 
Mac OS X dock. It provides a central location for accessing the following information:
■User manuals and video tutorials
■Solutions to troubleshooting problems...

Phaser® 4510 Laser Printer
2-1 This chapter includes:
■Overview of Network Setup and Configuration on page 2-2
■Choosing a Connection Method on page 2-3
■Configuring the Network Address on page 2-5
■Installing the Printer Drivers on page 2-9
■IPv6 on page 2-14
This chapter provides basic information about setting up and connecting to your printer. 
See also: 
Advanced Features Guide at www.xerox.com/office/4510support
Network Basics
Downloaded From ManualsPrinter.com Manuals 

Overview of Network Setup and Configuration
Phaser® 4510 Laser Printer
2-2
Overview of Network Setup and Configuration
To set up and configure the network:
1.Connect the printer to the network using the recommended hardware and cables.
2.Turn on the printer and the computer.
3.Print the Configuration page and keep if for referencing network settings.
4.Configure the printer’s TCP/IP address, which is required to identify the printer on the 
network. 
■Windows operating systems: Run the Installer on the...

Choosing a Connection Method
Phaser® 4510 Laser Printer
2-3
Choosing a Connection Method
Connect the printer via Ethernet, USB, or parallel. A USB or a parallel connection is a direct 
connection and is not used for networking. An Ethernet connection is used for networking. 
Hardware and cabling requirements vary for the different connection methods. Cabling and 
hardware are generally not included with your printer and must be purchased separately.This 
section includes:
■Connecting via Ethernet...