Xerox Phaser 4510DN User Manual

							Printer Configurations
Phaser® 4510 Laser Printer
1-5
Available Configurations
The Phaser 4510 printer is available in four standard configurations.
Feature Printer Configurations
4510B 4510N 4510DT 4510DX
Maximum Resolution True
1200 x 1200Tr u e
1200 x 1200Tr u e
1200 x 1200Tr u e
1200 x 1200
Maximum Print Speed 45 ppm Letter, 43 ppm A4 (all configurations)
PostScript and PCL Fonts Standard Standard Standard Standard
Memory (MB)** 128 128 128 128
20 MB Flash Memory Optional Optional Optional Optional
Hard Drive Optional Optional Optional Standard
Automatic 2-Sided Printing 
(Duplex)Optional Optional Standard Standard
Duplex Printing Speed 27 ipm
(if installed)27 ipm
(if installed)27 ipm 27 ipm
550-Sheet Feeder  Optional Optional Standard Standard
500-Sheet Stacker Optional Optional Optional Standard
Connectivity Parallel, USB* 10/100 
Ethernet, 
Parallel, USB10/100 
Ethernet, 
Parallel, USB10/100 
Ethernet, 
Parallel, USB
* 10/100 Ethernet is available as an option.
** Expandable to 512 MB.
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Configurations
Phaser® 4510 Laser Printer
1-6
Options
You can order additional trays, memory, and a hard drive if these items are not standard on 
your printer. Print the Configuration page to see which options are installed on your printer. To 
print the Configuration page, see Information Pages on page 1-8.
Options include the following:
■550-Sheet Feeder (includes tray)
■550-Sheet Tray
■500-Sheet Stacker with Job Offset
■Duplex Unit
■Hard Drive - Provides additional printer features:
■Secure, personal, personal saved, proof, and saved print jobs
■Font storage
■128 MB and 256 MB memory cards (maximum of 512 MB installed memory in two slots)
■20 MB Flash Memory
To order options for your Phaser 4510 Laser Printer, contact your local reseller or go to 
www.xerox.com/office/4510supplies
.
Upgrades
To order the Phaser 4510B to 4510N upgrade, contact your local reseller or go to 
www.xerox.com/office/4510supplies
.
Downloaded From ManualsPrinter.com Manuals 
						

							Control Panel
Phaser® 4510 Laser Printer
1-7
Control Panel
This section includes:
■Control Panel Features on page 1-7
■Control Panel Layout on page 1-8
■Menu Map on page 1-8
■Information Pages on page 1-8
■Sample Pages on page 1-9
■Power Saver Settings on page 1-9
Control Panel Features
The control panel:
■Displays the printer’s operating status (for example, Printing, Ready to Print), printer 
errors, and warnings.
■Prompts you to load paper, order and replace supplies, and clear jams.
■Enables you to access tools and information pages to help resolve problems.
■Enables you to change printer and network settings.
■Enables you to access supply status.
Downloaded From ManualsPrinter.com Manuals 
						

							Control Panel
Phaser® 4510 Laser Printer
1-8
Control Panel Layout
Menu Map
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1.On the control panel, select 
Information, and then press the OK button.
2.Select 
Menu Map, and then press the OK button to print.
Note:Print the Menu Map to see other information pages available for printing.
Information Pages
Your printer comes with a set of information pages to help you obtain the best results from 
your printer. Access these pages from the control panel. Print the Menu Map to see where 
these information pages are located in the control panel menu structure. 
For example, to print the Configuration page or the Supplies Usage page to view current 
information about your printer, do the following:
1.Status Indicator LED:
Green: Printer is ready to print.
Ye l l o w: Warning condition, printer continues to 
print.
Red: Startup sequence or error condition.
Blinking: Printer is busy or warming up.
2.Graphic display indicates status messages 
and menus.
3.Back button
Returns to the previous menu item.
4.Cancel button
Cancels the current print job.5.Up Arrow button
Scrolls upward through the menus.
6.Help (?) button
Displays a help message with information 
about the printer, such as printer status, error 
messages, and maintenance information.
7.Down Arrow button
Scrolls downward through the menus.
8.OK button
Accepts the setting selected.
Note:This print icon appears before the titles of information pages that can 
be printed. When the page is highlighted on the control panel, press the 
OKbutton to print that page.
Phaser 4510
4510-068
45
78 3 126
Downloaded From ManualsPrinter.com Manuals 
						

							
Control Panel
Phaser® 4510 Laser Printer 1-9
1.
On the control panel, select 
Information, and then press the  OK button.
2. Select 
Information Pages, and then press the  OK button.
3. Select 
Configuration Page or Supplies Usage Page, and then press the  OK button to 
print.
Note: You can also print informatio n pages from CentreWare Inte rnet Services (IS) and from 
the printer driver.
Sample Pages
Your printer comes with a set of sample page s that demonstrate different printer functions.
To print the sample pages:
1. On the control panel, select 
Information, and then press the  OK button.
2. Select 
Sample Pages, and then press the  OK button.
3. Select the desired sample page, and then press the  OKbutton to print.
See also:  Advanced Features Guide  at  www.xerox.com/office/4510support
Power Saver Settings
Factory Default:
■Power Saver: On
■Power Saver Timeout: 4 minutes
You can change the default power saver time on  the control panel or through CentreWare IS.
Using the Control Panel:
1.On the control panel, select Printer Setup > Printer Controls, then press the  OK button.
2. Verify that 
Power Saver is On. If Power Saver is Off, then select Power Saver and press 
the  OK  button to switch between 
Off and On.
3. Select 
Power Saver Timeout to select the new time.
4. Press the  OK button.
Using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address  in the browser’s Address field.
3. Select  Properties .
4. Select the  General folder on the left nagivation panel, then click  Printer Defaults.
5. In the  User Preferences  section, set the Power Saver option to On.
6. Select the new time from  Power Saver Timeout.
7. Click the  Save Changes  button.
Downloaded From ManualsPrinter.com Manuals 
						

							More Information
Phaser® 4510 Laser Printer
1-10
More Information
This section includes:
■Resources on page 1-10
■Xerox Support Centre on page 1-11
Obtain information regarding your printer and its capabilities from the following sources.
Resources
Information Source
Installation Guide* Packaged with printer
Quick Use Guide* Packaged with printer
User Guide (PDF)*  Packaged with printer 
(Software and Documentation CD-ROM)
Warranty Packaged with printer
Advanced Features Guide (PDF)www.xerox.com/office/4510support
Quick Start Tutorialswww.xerox.com/office/4510support
Printer Management Toolswww.xerox.com/office/pmtools
Online Support Assistantwww.xerox.com/office/4510support
PhaserSMARTwww.phaserSMART.com
Technical Supportwww.xerox.com/office/4510support
Information about menu selection or error 
messages on control panelControl panel Help (?) button
Information pages Control panel menu
* Also available on the Support website.
Downloaded From ManualsPrinter.com Manuals 
						

							More Information
Phaser® 4510 Laser Printer
1-11
Xerox Support Centre
The Xerox Support Centre is a utility that is installed during printer driver installation. It is 
available for printers with Windows 2000 and later or Mac OS X, version 10.2 and higher.
The Xerox Support Centre appears on the desktop for Windows printers or is placed in the 
Mac OS X dock. It provides a central location for accessing the following information:
■User manuals and video tutorials
■Solutions to troubleshooting problems
■Printer and supplies status
■Supplies ordering and recycling
■Answers to frequently asked questions
■Default printer driver settings (Windows only)
To start the Xerox Support Centre utility:
Note:If you have a USB or parallel connection, some of the status information is not 
available. You must have an Internet connection to view manuals and videos on the website. 1.Select one of the following options:
■Windows: Double-click the Xerox Support Centre icon 
on your desktop.
■Macintosh: Click the Xerox Support Centre icon in the 
dock.
2.Select your printer from the Select Printer drop-down list.
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser® 4510 Laser Printer
2-1 This chapter includes:
■Overview of Network Setup and Configuration on page 2-2
■Choosing a Connection Method on page 2-3
■Configuring the Network Address on page 2-5
■Installing the Printer Drivers on page 2-9
■IPv6 on page 2-14
This chapter provides basic information about setting up and connecting to your printer. 
See also: 
Advanced Features Guide at www.xerox.com/office/4510support
Network Basics
Downloaded From ManualsPrinter.com Manuals 
						

							Overview of Network Setup and Configuration
Phaser® 4510 Laser Printer
2-2
Overview of Network Setup and Configuration
To set up and configure the network:
1.Connect the printer to the network using the recommended hardware and cables.
2.Turn on the printer and the computer.
3.Print the Configuration page and keep if for referencing network settings.
4.Configure the printer’s TCP/IP address, which is required to identify the printer on the 
network. 
■Windows operating systems: Run the Installer on the Software and Documentation 
CD-ROM to automatically set the printer’s IP address if the printer is connected to an 
established TCP/IP network. You can also manually set the printer’s IP address on the 
control panel.
■Macintosh systems: Manually set the printer’s TCP/IP address on the control panel.
5.Install the driver software on the computer from the Software and Documentation 
CD-ROM. For information on driver installation, see the section in this chapter for the 
specific operating system you are using.
Note:If the Software and Documentation CD-ROM is not available, you can download the 
latest driver from www.xerox.com/drivers
.
See also: 
Advanced Features Guide at www.xerox.com/office/4510support
Downloaded From ManualsPrinter.com Manuals 
						

							Choosing a Connection Method
Phaser® 4510 Laser Printer
2-3
Choosing a Connection Method
Connect the printer via Ethernet, USB, or parallel. A USB or a parallel connection is a direct 
connection and is not used for networking. An Ethernet connection is used for networking. 
Hardware and cabling requirements vary for the different connection methods. Cabling and 
hardware are generally not included with your printer and must be purchased separately.This 
section includes:
■Connecting via Ethernet (Recommended) on page 2-3
■Connecting via USB on page 2-4
■Connecting via Parallel on page 2-4
Connecting via Ethernet (Recommended)
Ethernet can be used for one or more computers. It supports many printers and systems on an 
Ethernet network. An Ethernet connection is recommended because it is faster than a USB 
connection. It also allows you direct access to CentreWareInternet Services (IS). The 
CentreWare IS web interface enables you to manage, configure, and monitor networked 
printers from your desktop.
Network Connection
Depending on your particular setup, the following hardware and cabling is required for 
Ethernet.
■If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 
■If you are connecting to one or more computers with an Ethernet hub, or cable or DSL 
router, two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for 
each device.)
If you are connecting to one or more computers with a hub, connect the computer to the hub 
with one cable, and then connect the printer to the hub with the second cable. Connect to any 
port on the hub except the uplink port.
See also: 
Configuring the Network Address on page 2-5
Installing the Printer Drivers on page 2-9
Downloaded From ManualsPrinter.com Manuals