Yamaha Badger Raptor 80 Manual

– 15 –
CHK
ADJ

Air intake restrictor plate removal
Refer to “AIR FILTER CLEANING”.
NOTE:
To obtain full engine performance capability,
removing the air intake restrictor plate 1 is
required. Since removal of this plate will result
in a significant increase in power, turn the
speed limiter completely back in again.
1
AIR FILTER CLEANING
NOTE:
There is check hose 1 at the bottom of the air
filter case. If dust and/or water collects in this
hose, clean the air filter element and air filter
case.
1.Remove:...

– 16 –
CHK
ADJ
AIR FILTER CLEANING
6.Check:

Air filter element
Damage → Replace.
7.Clean:

Air filter element
***********************************************
Cleaning steps:

Wash the element gently, but thoroughly in
solvent.
WARNING
Never use low flash point solvents such as
gasoline to clean the air filter element.
Such solvent may lead to a fire or explo-
sion.

Squeeze the excess solvent out of the ele-
ment and let dry.
CAUTION:
Do not twist the filter element when
squeezing the filter element....

– 17 –
CHK
ADJ
SPARK ARRESTER CLEANING
SPARK ARRESTER CLEANING
1.Clean:

Spark arrester
***********************************************
Cleaning steps:
WARNING

Select a well-ventilated area free of com-
bustible materials.

Always let the exhaust system cool
before performing this operation.

Do not start the engine when removing
the tailpipe from muffler.

Remove the screws 1.

Remove the tailpipe 2 by pulling it out of the
muffler.

Tap the tailpipe lightly with a soft-face ham-
mer or suitable tool,...

YAMAHA MOTOR CO., LTD.
2500 SHINGAI IWATA SHIZUOKA JAPAN
PRINTED IN U.S.A.