Yamaha Dvx S200 Owners Manual

							87
Operating Other Equipment with the CinemaStation Remote Control
Operating Other Equipment
 with the CinemaStation Remote Control
English
Manufacturer Code List
Depending on the model and year, you may not be able to use some manufacturer products. In this case, use
the remote control supplied with each product.
Manufacturer Manufacturer Code
Yamaha 299/292
Admiral 292/293
Aiko 287
Aiwa 294/276/283
Akai 295/296
Alba 296
AOC 297/286
Audiovox 285
Belcor 297
Bell & Howell 292
Bestar 298
Blaupunkt 229/222
Blue sky 298
Bradford 285
Brandt 223
Brocsonic 297
Brokwood 297
Bush 296
Candle 286/297
Citizen 286/287/297
Clatronic 298
Contec 285
Craig 224/285
Croslex 225
Crown 285
Curtis Mathis 297/226/286
CXC 285
Daewoo 297/298/224/227/228/
287
Daytron 239/297
Dual 298
Dumont 297
Emerson 297/224/239/232/285
Envision 286/297
Ferguson 223/265/266
First line 298
Fisher 295/233
Fraba 298
Manufacturer Manufacturer Code
Funai 277/278/285
Futuretec 285
GE 293/297/234/235/236
Gibralter 297
LG/Goldstar 297/298/239/237
Goodmans 296/298/223
Grundig 229/238/249
Harvard 285
Hitachi 297/239/242/243
ICE 296
Irradio 296
Itt/Nokia 244/245
JC Penny 293/297/234/237/286
JVC (Victor) 296/246/247
Kendo 298
Kenwood 297
KTV 297/239/285
Loewe 298/248
LXI 293/297/225/226/233
Magnavox 297/225/239/286
Marantz 286/297
Matsui 295
MGA 286/297
Mitsubishi 299/297/259
MTC 286/297
Multitec 285
NEC 297/252/282/286
Nikko 286/287/297
Nokia 244/245
Nokia Oceanic 245
Nordmende 265/266
NTC 287
Onwa 296/285
Panasonic 234/235/236/253
Philco 297/225/239/286
Philips 225
Pilot 297
Pioneer 226/235/254/255/268
Manufacturer Manufacturer Code
Portland 297/256/287
Quasar 234/235
Radio Shack 299/293/297/285/286
RCA 293/297/234/256/257/
258
Realistic 299/293/297/285/286
SABA 223/269/265/266
Sampo 286/297
Samsung 297/239/248/262/275/
286
Sanyo 295/233/279/272/273/
274
Schneider 296
Scott 297/285
Sharp 292/239/232/284
Shogun 297
Siemens 229
Signature 292
Sony 263
Soundesign 285
SSS 285/297
Starlite 285
Sylvania 297/225/286
Teknika 297/285/287
Telefunken 269/264/265/266
Thomson 223/266
Toshiba 292/226/267
Videch 297/242
Wards 297/239/232/286
TV
016DVX-S200-en 04.3.1, 11:21 AM
87
 
						

							88
Operating Other Equipment with the CinemaStation Remote Control
Manufacturer Manufacturer Code
Yamaha 399/392/393/394
Admiral 395
Aiwa 396/397/398/329/339
Akai 322/323/324
Asha 363
Audio Dynamic 392/394
Audiovox 396
Beaumark 363
Bell & Howell 393
Blaupunkt 325/326
Brocsonic 327
Bush 322
Calix 396
Candle 335/363/396
Canon 325/328
CGM 396/332
Citizen 396
Craig 396/363
Curtis Mathis 397/328/333/392
Cybernex 363
Daewoo 328/334/335
DBX 392/394
Dimensia 333
Dynatech 397
Electrohome 396
Electrophonic 396
Emerson 327/334/396/397
Fisher 393/336
Funai 397
Garrard 397
GE 328/333/387/363
LG/Goldstar 396/388/392
Goodmans 334/337
Grandiente 397
Grundig 332/338
Hitachi 325/333/349/342/343
Harman Kardon 392
Instant Replay 325/328
Itt/Nokia 393
JCL 328
JC Penny 392/393/394/328/333/
349/363/396
JVC (Victor) 392/394/344/345/346/
347
Kendo 396
Kenwood 392/394/396
Kodak 396
Manufacturer Manufacturer Code
Lloyd 397
Loewe 396/337
Luxor 395
LXI 393/396/397/336/349
Magnavox 325/326/328
Magnin 363
Marantz 392/394/328
Marta 396
Matsui 396
MEI 328
Memorex 328/336/363/396/397
Minolta 333/349/342
Mitsubishi 399/344/348/359/352/
353
MTC 363/397
Multitech 397/348/354
NEC 392/394/344/383
Nikko 396
Noblex 363
Nokia 393/395
Nokia Oceanic 395
Okano 323
Olympic 325/328
Optimus 396
Orion 327
Panasonic 325/328/355/378/384/
385
Pentax 333/349/342
Philco 325/328
Philips 325/326/328/337/356/
357
Phonola 337
Pilot 396
Pioneer 325
Quasar 325/328
Radio Shack 396/397
Radix 396
RCA/PROSCAN 325/326/328/333/335/
349/358/369/363/342
Realistic 393/397/328/336/359/
362/396
Samsung 354/358/363/364/365/
366/335
Sansui 394
Sanyo 393/336/367/363
Schneider 337
Scott 399/335/336/348/359/
352/354/358
Sears 328/342/396
Seleco 322
Manufacturer Manufacturer Code
Sharp 395/362/382
Siemens 393
Signature 2000 395/397
Sony 368/379/372/373/374/
375
Sylvania 397/325/326/328
Symphonic 397
Tandberg 334
Tashiro 396
Tatung 392/394
Teac 392/394/397
Technics 325/328
Teknika 328/396/397
Telefunken 376/377
Thorn 393/396
Toshiba 335/369/389
Totevision 363/396
Universum 396/327/376
Vector Research 392
Videosonic 363
W.WHouse 396
Wards 395/396/336/362/328/
342/363/397
CD recorder
Manufacturer Manufacturer Code
Yamaha 499
DENON 422/423
Hitachi 424
JVC (Victor) 425/428
Kenwood 422
Marantz 422
Philips 422
Pioneer 426
Sony 427
Teac 429
MD recorder
Manufacturer Manufacturer Code
Yamaha 599/522/598
Denon 523/524
JVC (Victor) 525
Kenwood 526
Onkyo 592
Pioneer 527
Sharp 528
Sony 522
Teac 593
VCR
016DVX-S200-en 04.3.1, 11:21 AM
88
 
						

							89
Using the SET MENU
Using the SET MENU
English
Using the SET MENU
• Even during playback you can change settings in the SET MENU.
• To learn more about “* Speaker Set” read “Setting the Speaker Mode” on page 63.
You can use the SET MENU to adjust settings, including Speaker settings.
Change the settings to match your listening environment.
SET MENU List
The SET MENU contains the items below.
Advice
Item Default Setting (value)
* Speaker Set * CENTER SML
* FRONT SML
* SUR. SML
* BASS SWFR
* F. Level Nrm
* LFE Level * SP LFE 0 dB
* HP LFE 0 dB
* SP Delay * CENTER 0 ms
* SA-CD Delay * CENTER 0 ms
* SUR. 0 ms
* D. Range * SP D.R MAX
* HP D.R MAX
* L/R Balance Center
* HP Tone CTRL * HP BASS 0 dB
* HP TRBL 0 dB
* Input Assign * OPT: MD/CD-R
* Input Mode * MODE: AUTO
* Display set * DIMMER 0
* Tuner Step AM9/FM50
 (Asia, Korea and General models only)
017DVX-S200-en 04.3.1, 11:21 AM
89
 
						

							90
Using the SET MENU
Navigating the SET MENU
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
AMP
SET MENU
g
h
gg
Press AMP.
Press SET MENU.
Press  h or  g repeatedly to select the Menu you
want.
Press  q or  w.
Once in the setting mode of the selected menu the current
setting appears in the CinemaStation Display.
Depending on the item, press  h or  g to enter a submenu.
Press  q or  w repeatedly to change the setting.
When exiting the SET MENU, press SET MENU.
Pressing any one of DSP Program buttons also exits the
SET MENU.
017DVX-S200-en 04.3.1, 11:22 AM
90
 
						

							91
Using the SET MENU
Using the SET MENU
English
Adjust the playback level of the LFE signal
(* LFE Level)
You can adjust the LFE channel output level while
playing a Dolby Digital or DTS signal. Adjust the LFE
level to match the performance of the Subwoofer and
headphones.
Submenu: SP LFE, HP LFE
Variable range (dB):  -20 to 0 dB.
Default setting:  0 dB
L
CC
R
RL RR
Virtual Center Speaker Position
Set the Delay Time of the Center Speaker (*
SP Delay)
You can set the Delay Time of the Center Speaker. This
is effective when the Center Speaker outputs sound
during Dolby Digital, DTS and other forms of playback.
Normally the Center Speaker and Front L/R Speakers
are placed in line with each other. However, they should
be placed at an equal distance from the listener so that
the sound each one outputs enters the listener’s ear at the
same time. With Delay Time, the Center Speaker can be
moved to an ideal position further away to match the
distance of each speaker to the listener. Center Delay is
effective in adding depth to the sound field and presence
to speech.
Variable range (ms):
 0 to 5 ms
Default setting:  0 ms
Press  w to set the speaker’s virtual position further
away. Press  q to set it closer.
• Every 1 ms increase in Delay Time increases the distance
away from the listening position by 30 cm (1 foot).
Advice
Set the Delay Time of the Center and
Surround Speakers during Super Audio CD
playback (* SA-CD Delay)
You can set the Delay Time of the Center and Surround
Speakers when playing Super Audio CDs containing
front-channel sound or surround-channel sound.
Normally the Center Speaker and Front L/R Speakers
are placed in line with each other and the Surround
Speakers are placed behind the listener. For best results
place them at an equal distance from the listener so that
the sound each one outputs enters the listener’s ear at the
same time. Use Delay Time to move the virtual position
of the Center Speaker or the Surround Speakers to an
ideal position further away to match the distance of each
speaker to the listener. Center Delay and Surround Delay
add depth to instrument sound and create the expansive
feeling of a concert hall.
Submenu:  CENTER, SUR.
Variable range:  CENTER 0 to 5 ms, SUR. 0 to 15 ms
Press  w to set the speaker’s virtual position further
away. Press  q to set it closer.
• Every 1 ms increase in Delay Time increases the distance
away from the listening position by 30 cm (1 foot).
L CC
R
LS RS
LS RS
Virtual Center Speaker Position
Virtual Surround Speakers Position
Advice
017DVX-S200-en 04.3.1, 11:22 AM
91
 
						

							92
Using the SET MENU
Reassign input jacks (* Input Assign)
You can assign CinemaStation’s OPTICAL IN jack to
VIDEO 1, VIDEO 2, VCR or MD/CD-R. When the source
is set to one of them, press the appropriate input selection
button to operate the device connected to the OPTICAL
IN jack and the input source name appears on the display
panel based on your selection.
Selection items: MD/CD-R, VIDEO 1, VIDEO 2, VCR
Default setting:  MD/CD-R
• U.K. and Europe models only have VIDEO instead of
VIDEO 1 and VIDEO 2.
• VIDEO is used as VIDEO 1 in above models.
Set the input mode when powering on (*
Input Mode)
Set the input mode for powering on when playback devices
are connected to both digital and analog jacks.
Selection items:  AUTO,  LAST
Default setting:  AUTO
AUTO:  When CinemaStation power is turned on the input
mode automatically sets to AUTO.
LAST:  The last selected input mode is applied as is.
Adjust the CinemaStation Display
brightness (* Display set)
Dimmer
You can adjust the CinemaStation Display brightness.
Variable range:  -4 to 0
Default setting:  0
Press  w to increase the brightness. Press  q to decrease the
brightness.
Set frequency step (* Tuner Step) (Asia,
Korea and General models only)
The inter-station frequency spacing differs depending on
the areas. Set the frequency step according to the frequency
spacing in your area.
Selection items:  AM9/FM50, AM10/FM100
Default setting:  AM9/FM50
Press  w or  q to select the desired setting.
• Turn off CinemaStation after you change the setting. The
new setting becomes effective after you turn on
CinemaStation again.
• Refer to the list below for the frequency spacing. — North, Central and South America: AM10/FM100
— Other areas: AM9/FM50
Notes
Set the dynamic range during Dolby Digital
playback (* D. Range)
You can select the dynamic range (spread between the
max. and min. volume) of Dolby Digital playback from
3 levels.
Submenu:  SP D.R, HP D.R
Selection items:  MAX (Maximum), STD (Standard),
MIN (Minimum)
Default setting:  MAX
MAX:  Plays back the dynamic range of the source at the
maximum limit.
STD:  Dynamic range recommended by software
manufacturers for home use.
MIN:  Easy to hear even at a low volume, dynamic range
suitable for evening listening.
• Depending on the Dolby Digital playback source, the MIN dynamic range may not work and result in an extremely low
volume. In this case, set the dynamic range to MAX or STD.
Adjust the volume balance of the Front
Speakers (* L/R Balance)
You can set the volume balance of the Front L/R
Speakers. This setting also applies to Headphones.
Variable range:  L/R 10 levels
Default setting:  Center
Press  w to make the sound smaller in the Front Left
Speaker, and press  q to make the sound smaller in the
Front Right Speaker. You cannot turn off the sound for
either one of the Front Speaker.
Adjust the sound quality of headphones
(* HP Tone CTRL)
You can adjust the low tones (BASS) and high tones
(TRBL) of your headphones.
Submenu:  HP BASS, HP TRBL
Variable range (dB):  -6 to +3 dB.
Default setting:  0 dB
Press  w to increase the range of the low or high tones.
Press  q to decrease the range.
Note
Notes
017DVX-S200-en 04.3.1, 11:22 AM
92
 
						

							93
Using the On Screen Menu
Using the On Screen Menu
English
Using the On Screen Menu
You can use the On Screen Menu to adjust settings for DVD playback,
including picture and language settings.
Navigating the On Screen Menu
For example, adjust the color saturation.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
ON
SCREEN
g
h
gg
Press 
w to enter the submenus.
Press 
h or  g to select “Preference” in the Main
Menu. Press ON SCREEN.
Program
View
Play Option
Search
Toolbar
Preferences
Setup
Features
PicturePreferences
Toolbar
Setup
Saturation
Contrast
Color settings
Brightness
Sharpness
Picture
Features
➡
To select other items in the submenu, press  w first, and
press  h or  g.
Advice
018DVX-S200-en 04.3.1, 11:22 AM
93
 
						

							94
Using the On Screen Menu
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g
h
ON
SCREEN
ENTER
gg
Press ENTER, then press ON SCREEN to turn off
the On Screen Menu. In some cases, you can also use h or  g for setting
content. Press  q or  w to set.
Press 
h or  g to select  “Saturation ”.
Press 
w to enter menu items.
Natural
Brightness
Color settings
Saturation
Contrast
Sharpness
0
Contrast
Saturation
Video shift
Color settings
+2
Contrast
Saturation
Video shift
Color settings
Advice
To set the other menu items, follow the example above.
018DVX-S200-en 04.3.1, 11:22 AM
94
 
						

							95
Using the On Screen Menu
Using the On Screen Menu
English
On Screen Menu Guide
Set to “On” to turn on/off the status display using
the STATUS button on the Remote Control. The
status display includes the type of disc, the
currently playing track/chapter number, the total
time of track/chapter and the elapsed time of
track/chapter. Set to “Off” to hide the status
display.
Adjust from +1 to +7. Adjusts the screen
position. The screen display moves to the right as
the number becomes larger.
Adjust from -7 to +7. Adjusts the video color
saturation.
Adjust from -7 to +7. Accentuates bright and
dark parts of video.
Adjust the video shade.
Adjust from -7 to +7. Adjusts the video
brightness.
Adjust from -7 to +7. Adjusts the video
vividness.
Deletes all Program content. Page 33
Saturation
Picture
Preference
Toolbar Features
Program
View Contrast
Brightness
Sharpness Status window
Clear All
Tracks
Program
Play list (Playlist)
Zoom
Angle
Chapter Preview
Play Option Setting Content
Setting Item
Submenu
Main Menu
Selects a track. Page 31
Selects Program Play “On”/“Off”. Page 33
Shows Playlist. Page 33
Enlarges the picture. Move + to the point to be
enlarged using h, g , q , and  w. Each time you
press the ENTER key, the zoom changes. To
return it to the previous size, select Zoom 1 and
press ON SCREEN.
Switches the picture angle.
When this item is on, the beginning of each
chapter can be previewed one by one.
Selects the audio language.
Select the title, chapter or track to play.
Selects the subtitle language. You can only select
languages the disc contains.
Advances/reverses one frame at a time. Frame
Advance is not available with video CD.
Select the speed from among -8, -4, 1, 4, 8.
Specify an elapsed time and search for a scene.
Page 30
Select the speed from among -1, -1/2, -1/4, -1/8,
0, 1/8, 1/4, 1/2, 1.
Audio
Search Disc Navigation
Sub-title (Subtitle)
Frame by FrameVideo shift
Color settings
(Colour settings)
Fast
Time
Slow
018DVX-S200-en
04.3.1, 11:22 AM
95
 
						

							96
Using the On Screen Menu
Set the Disc Lock “On”/“Off”. Page 83
Adjust the level from 0 to +8. Page 82
Enter the password. Page 81
Change the password. Page 82
Set to match your TV screen aspect.
4:3 panscan
4:3 letterbox
Wide-screen (Widescreen)
Set the video signal system*
2 to match your TV.
Set to AUTO when using a TV compatible with
both NTSC and PAL.
(U.K. and Europe models only) Sets the output
signal of AV MONITOR OUT jack to YUV or
RGB.
Set the language you usually select for subtitles.
When playing a disc, the subtitles in the selected
language appear first. When the disc does not
contain the selected subtitle language, the subtitle
of that language will not appear.
Disc Lock
Parental level
Enter PIN
Change PIN
TV shape
Access
TV*
1
Setup
TV System
Video Output
Language Setting Content
Setting Item
Submenu
Main Menu
Default Sub-title
(Default Subtitle)Select the country where you use CinemaStation.
Set the language for the On Screen Menu.
Set the language you usually select for audio.
Country
Menu Language
When playing a disc, you hear the audio in the
selected language first. When the disc does not
contain the selected language you selected, it will
play in another language.
Select the output signal for the OPTICAL OUT
jack. The speaker sound changes depending on
the setting for this menu item.
All: Outputs all types of digital signals that
CinemaStation can reproduce.
PCM Only: Outputs the Pro Logic decoded
signal only.
Set Playback Control “On”/“Off”. If set to “Off”,
the Disc Menu does not appear on the TV screen.
Default Audio
Features PBC
*
1Be careful when setting this menu item. If it does not match your TV, the menu and playback screen will not appear
properly or will not appear on the TV. If that happens, refer to “Recover TV settings” below.
*
2This unit can play PAL and NTSC, but your television must match the system used on the disc.
Recover TV  settings
When the screen does not appear properly due to TV setting, perform the steps below to recover the setting.
1 Press DVD/CD.
2 Press  s for 5 seconds. NTSCPAL appears in the CinemaStation Display.
3 Press  e to switch the setting. NTSC/PAL SET appears in the CinemaStation Display.
When connecting with AV MONITOR OUT (U.K. and Europe models only)
1 Perform steps 1 and 2 above.
2 Press  s again. YUVRGB appears in the CinemaStation Display.
3 Press  e to switch the setting. YUV/RGB SET appears in the CinemaStation Display.
Audio Menu Digital output
018DVX-S200-en 04.3.1, 11:22 AM
96