Yamaha Projector Dpx 1200 User Manual

37
Menu
7

Reset the selected parameter to the default setting.
VIDEOESC : Return
Image
Memory 1 Signal Initial SetupMove Menu Window
Menu operations
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Press        to reset 
to factory settings.
ESC : Return
1. Select the item you wish to reset to the default setting
from the main menu.
2. Press the RESET button on the remote control to reset
to the default settings (resetting does not affect items
with no default setting).
Memo
•The RESET button...

38 
Reset the [Lamp Running Time] displayed on screen to “0”.
VIDEO
Special Image Signal Initial SetupMove Menu Window
Memory 1 Cinema Zoom
Cinema Squeeze
14:9 ZoomSubtitle Zoom
+ : Enter
Menu operations

Use the [Subtitle Area] menu to adjust the size of the subtitle display area. Use [V Scroll] to adjust the vertical position of the subtitle display.
1.  From the menu screen, select [Signal] 
 [Display
Aspect Ratio] 
 [Special].
2.  Press the + button to enter the lower level selection
menu.
3.  Select...

39
Menu
7
5. Press the + button to enter the lower level selection
menu.
6. Press h or g button to select [Subtitle Area] or [V
Scroll].
7. Press the + or – button to select a suitable setting.
Memo
•Press the h or g button to move to a different menu item in
the [Subtitle Zoom] menu.
8. Press the ESCAPE button to return to the higher level
selection menu.
VIDEO
Image Signal Initial SetupMove Menu Window
Memory 1
ESC : Return
Subtitle AreaV Scroll0
0
Subtitle Zoom
Menu operations
Press the  button
1....

40

 Adjusting image quality using the inline menu
Use the inline menu to adjust image quality without obstructing the image during projection. See “Menu group items and functions” (page 25
to 31) for information on each setting.

Black Level
Inline menu item
Indicates that you can use the h and g buttons to
change the position of the inline menu.
Press the + or - button to set the item to an appropriate setting.
Press the RESET button to return the item to its default setting.

1. Press the  button when...

41
Memory function
8
The memory function automatically saves the settings of menu items listed in the “Items to be saved” table below.

 Memory configurations
The DPX-1200 stores up to six sets of configurations, called memory numbers, for each input jack.  For each memory number, the DPX-
1200 stores specific configurations for each signal type, giving a total of 72 configurations.

 Recalling a memory number


 Saving memory settings
All memory numbers have default settings. Since the DPX-1200 saves...

42
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
2. Press the g button to select
“Memory number status” from the
bottom of the screen.
3. Press the + button to open the
submenu.
Remote Control Main Unitor
5. Press the  button to recall the
settings in the selected memory. 4. Press the h or g button to...

43
Memory function
8 
 Memory lock
The lock function protects information in a memory not to be overwritten. You can set the lock function for each memory number, and
additionally for each SDTV/HDTV/RGB-PC input.

1. Recall the memory number you
wish to lock.
2. Select a memory number status.
3. Press the 
 button.
“
” appears beside locked memory
numbers.
Remote Control Main Unitor
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
Image Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma...

44
1. Recall the memory number to be
the copy source.

 Memory copy
Copy the settings stored in a memory number to another memory number.
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
2. Press the g button to select
“Memory number status” from the
bottom of the screen.
Remote Control Main Unitor
Memory...

45
Memory function
8
5. Press the + button to display the
confirmation screen.
Remote ControlMain Unit or
Memory 6VIDEOMemory 5Memory 4Memory 3Memory 2Memory 1
: Fix
Image Signal Initial SetupMove Menu Window
Copy the Memory?
Press to confirm.
Ye sNo
6. Press the h or g button to select
[Yes] .
Remote ControlMain Unit or
Memory 1VIDEO: Fix
Image Signal Initial SetupMove Menu Window
Copying to Memory 3 ...7. Press the  button.
The settings stored in the source memory
number are copied to the destination...

46
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
ESC : ReturnPress        to reset current memory.
1. From the main menu, select
[Initial] 
 [Reset]  [Current
Memory].
VIDEO+ : Enter
ResetAll Settings
All Memory
Current Memory Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display the
confirmation screen.
3. Press the 
 button to reset the
parameters to their default
settings.
Remote Control Main Unitor
Remote Control Main Unitor

 Resetting to the default...