Zanussi Zdf 2010 User Manual

ENUser manual
Dishwasher
ZDF 2010
 

Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _  3
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _  10
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Technical information _ _ _ _ _ _ _ _ _ _ _ _  13...

– Farm houses
– By clients in hotels, motels and other resi-
dential type environments
– Bed and breakfast type environments.
Warning! Risk of injury.
• Do not change the specification of this appli-
ance.
• Put knives and cutlery with sharp points in
the cutlery basket with the points down or in
a horizontal position.
• Do not keep the appliance door open without
supervision to prevent to fall on it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey
the safety...

Control panel
1
65423
1On/off indicator
2Programme marker
3Indicators
4Half load button
5Start button
6Programme knob
IndicatorsDescription
End indicator.
Salt indicator. This indicator is off while the programme operates.
Rinse aid indicator. This indicator is off while the programme oper-
ates.
Programmes
ProgrammeDegree of soil
Type of loadProgramme
phasesOptions
Heavy soil
Crockery, cutlery, pots and
pansPrewash
Wash 70 °C
Rinses
DryHalf-load
Normal soil
Crockery and cutleryPrewash
Wash 65 °C
Rinses...

ProgrammeDegree of soil
Type of loadProgramme
phasesOptions
 3)AllPrewash 
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil.
3) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the...

Adjusting the water softener
Hard water contains a high quantity of minerals
that can cause damage to the appliance and
bad washing results. The water softener neu-
tralises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. Refer to the tableto adjust the water softener to the right level. It
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
You must adjust the water softener man-
ually and electronically.
Water...

5. To confirm the setting, turn the programme
knob until the programme marker is aligned
with the on/off indicator.
Filling the salt container
Caution! Only use dishwasher salt. Other
products can cause damage to the
appliance.
Water and salt can come out from the salt
container when you fill it. Risk of corrosion. To
prevent it, after you fill the salt container, start a
programme.
12
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
4
56
Filling the rinse aid dispenser
Caution!...

2. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to ’SETTING AND
STARTING A PROGRAMME’.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and soil.
Loading the baskets
Refer to the supplied leaflet with examples
of the load of the baskets.
• Only use the appliance to...

When you use tablets, that contain salt and
rinse aid, do not fill the salt container and the
rinse aid dispenser. The rinse aid indicator al-
ways comes on if the rinse aid dispenser is
empty.
1. Adjust the water softener to the lowest lev-
el.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Turn the programme knob until the pro-
gramme marker is aligned...

Care and cleaning
Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
Cleaning the filters
1
C
B
A
2
3
To remove filters (B)
and (C), turn the han-
dle counterclockwise
and remove. Pull
apart filter (B) and
(C). Wash the filters
with water.
A
4
Remove filter (A).
Wash the filter with
water.
D
A
5
Put filter (A) to its ini-
tial...