Zanussi Zdf 2010 User Manual

Alarm codeProblem
• The start indicator flashes continuously.
• The end indicator flashes 1 time intermittently.The appliance does not fill with water.
• The start indicator flashes continuously.
• The end indicator flashes 2 times intermittently.The appliance does not drain the water.
• The start indicator flashes continuously.
• The end indicator flashes 3 times intermittently.The anti-flood device is on.
Warning! Deactivate the appliance before
you do the checks. Turn the programmeknob until the...

ProblemPossible causePossible solution
 The filters are not correctly assem-
bled and installed.Make sure that the filters are correctly
assembled and installed.
 The spray arms are clogged.Remove remaining soil with a thin
pointed object.
 The programme was not applicable
for the type of load and soil.Make sure that the programme is ap-
plicable for the type of load and soil.
 Incorrect position of the items in the
baskets. Water could not wash all
items.Make sure that the position of the
items in the...

ProblemPossible causePossible solution
 The quality of the combi detergent
tablets can be the cause.• Try a different brand of combi deter-
gent tablets.
• Activate the rinse aid dispenser and
use the rinse aid together with the
combi detergent tablets.
Technical information
DimensionsWidth / Height / Depth (mm)600 / 850 / 610
Electrical connectionRefer to the rating plate.
 Voltage220-240 V
 Frequency50 Hz
Water supply pressureMin. / max. (bar / MPa)(0.5 / 0.05 ) / (8 / 0.8 )
Water supply 1)Cold water...

14
 www.zanussi.com
 

 15 www.zanussi.com
 

 www.zanussi.com/shop
   
156959661-A-222012