Zenith Projector Dsv 100 User Manual

DSV-110 
Presentation Series 
DSV-100
operating guide 

3
2
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to...

(Continued from previous page)
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National
Electrical Code (U.S.A.), ANSI/ NFPA 70 provides informa-
tion with regard to proper grounding of the mast and sup-
porting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding...

7
6
Page
Using the menus
 . . . . . . . . . . . . . . . . . . . . . . . .1 9
7.1 The Menu System  . . . . . . . . . . . . . . . . . . . . . .1 9
7.1.1 Main menu  . . . . . . . . . . . . . . . . . . . . . . . . . . .1 9
7.2 Set-up Menu  . . . . . . . . . . . . . . . . . . . . . . . . . .2 1
7.2.1 Picture orientation  . . . . . . . . . . . . . . . . . . . . .2 1
7.2.2 Language  . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2
7.2.3 Mouse system  . . . . . . . . . . . . . . . . . . . . . . . .2 2...

9
8
Figure 2:Connecting to a 
laptop, notebook• Back panel of computer
• PC adapter
• EVC cableFigure 2.
1
2
3
123
3214
5
11
8910
MENU
QUICK
ON
ZAP 1OFF
ZAP 2
Figure 1.
Figure 3.
1
2
4
3
Figure 3: Connecting to a desktop PC
with standard RGB• Back panel of computer
• PC monitor
• EVC cable
• PC adapter1234
DSV-100 only 

11
10
Figure 4.
1
2
4
3
5
6
7
Figure 4: Connecting the mouse cable
and stereo jack (PC)• Back panel of computer
• PC monitor
• EVC cable
• PC adapter
• Stereo jack cable
• PS/2 mouse for PC
• RS232 mouse for PC1234567
1.3 Insert batteries in the
remote control Figure 5 shows the remote control with the
battery lid removed. Slide off the battery lid
and insert the batteries with the + and - poles
correct. Slide the battery lid back on again.1.4 Connect projector to
power supply Plug in your projector. Do...

13
The procedure for connecting
a video source to the projec-
tor is the same for S-Video
and Composite video.SECAM, PAL N and PAL M modes are manually
selected by pressing the “Green Button“. If the
right format is not found the first time, press
again. The video format is stored separately
for each connector.
1.Make sure that the video source 
and the projector are switched off. 2.Connect the video cable from the Video
out connector of the video source to the
correct video connector on the projector...

15
14
These three work differently and it is impor-
tant to consider the options of each when
adjusting the projector settings.AntennaWhen you adjust your TV to signals from an
antenna you must store each channel in a dif-
ferent program. . The same is true for the pro-
jector TV-tuner. When connected to an anten-
na you assign the different channels to the
programs in the Television Setup Menu. Then
you use the Up and Down arrows in the menu,
remote control or the channel up/down button
on the control...

17
16
tion to the zap keys, select the Zap icon from
the menu. The zap keys can be programmed to
do the same function e.g. volume up/down.
See section 7.2.5 for further explanations of
the zap menu.QuickWhen pressing the Quick key you can switch
between all selected functions for the Quick
key. See section 7.2.4. for how to select func-
tions for the Quick key.
Pointer mode (see section 7.2.5)In pointer mode you can move a pointer cursor
on the screen by using the mouse function.Blank mode (see section...

19
18
6.4  Adjusting the height and
angle of the projectorYou can adjust the height and angle of the
projector by adjusting the four small feet
underneath the product. Note!
The projector should never be left with an
angle of more than 15 degrees over a long
period of time. Doing so will shorten the
lifetime of the lamp.6.5  Aspect Ratio Selection
(TheaterLite DSV-110
only)Aspect Ratio selection.In this menu you can select the aspect
ratio of 4:3 or 16:9.7.1 The menu systemMain menu. Menu with video...