Home > Accell > HDMI Cable > Accell UltraCat HD HDMI Over Single Cat5e HDBaseT Extenders E090C003B Manual

Accell UltraCat HD HDMI Over Single Cat5e HDBaseT Extenders E090C003B Manual

Add to Favourites
    Download as PDF

    View the Accell UltraCat HD HDMI Over Single Cat5e HDBaseT Extenders E090C003B Manual for free. All the Accell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 The Accell UltraCat™ HDMI over Cat5e High Speed Extenders enables an HDMI audio and video signal to travel across UTP (Cat- 5e or Cat-6) LAN cables. The UltraCat extenders support HD resolution transfer over long cable runs in lengths of up to 328 feet (100m) for 1080p video. For longer runs the UltraCat High Speed Extenders can be cascaded. *All cable lengths are approximate depending on cable quality and environmental RF and EMI. Not all Cat-5e and Cat-6 cables are of the same quality. The...
    Page 2 ■Firmware Update via RS-232 Use this feature if Accell has a firmware update available and recommends the update for your use. 1. Unplug the power adapters from both Extenders. 2. Open the case of both the Transmitter and Receiver to gain access to the jumpers. 3. According to the printing (“Update” for firmware update, “Normal” for RS232 transmission) on the circuit board, relocate the jumper cap in both of the extenders to the Update position. 4. Plug in the power adapters and follow the...
    Start reading Accell UltraCat HD HDMI Over Single Cat5e HDBaseT Extenders E090C003B Manual

    Related Manuals for Accell UltraCat HD HDMI Over Single Cat5e HDBaseT Extenders E090C003B Manual

    All Accell manuals