Home > Accell > HDMI Cable > Accell UltraCat HDMI to Single Cat5e Extenders E090C005B Manual

Accell UltraCat HDMI to Single Cat5e Extenders E090C005B Manual

Add to Favourites
    Download as PDF

    View the Accell UltraCat HDMI to Single Cat5e Extenders E090C005B Manual for free. All the Accell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Introduction: The Accell UltraCat HDMI to Cat5e Extenders enables an HDMI audio and video signal to travel across a single twisted-pair category cable. The UltraCat extender supports up to 1080p resolution over long cable runs with lengths of up to 164 feet (50m) using Cat5e or Cat6 cable. Not all Cat5e and Cat6 cables are of the same quality. The above supported lengths are achievable using high quality and certified, solid core, 24AWG Unshielded Twisted Pair (UTP) cable that is rated at...
    Page 2 Symptom Possible Cause Potential Solutions No video EDID Use the EDID button on the transmitter to copy the EDID from the display. See EDID Copy Button above No video Cable connection Verify the Category cable is plug firmly into the Cat5e/6 ports. Ensure the HDMI cables are connected. Blinking video Cable performance Lower the display resolution. If this helps than the Cat-5e cable cannot support the bandwidth. Try a Cat-6 cable. Blinking video EMI (Interference) Use a shielded Cat-6 cable...
    Start reading Accell UltraCat HDMI to Single Cat5e Extenders E090C005B Manual

    Related Manuals for Accell UltraCat HDMI to Single Cat5e Extenders E090C005B Manual

    All Accell manuals