Acer Aspire 1810t Service Guide
Have a look at the manual Acer Aspire 1810t Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3101 Main Unit Reassembly Process Replacing the Speaker Modules 1.Put the speakers in place. 2.Apply adhesive and attach the speaker cables in two locations. 3.Replace the foam piece.
102Chapter 3 4.Replace the speaker module four screws. Screw List StepScrewQuantityScrew Type Speaker Module AssemblyM2*3 4
Chapter 3103 Replacing the RTC Battery 1.Place the RTC battery into the holding clips on the main board.
104Chapter 3 Replacing the Thermal Module 1.Connect the thermal module connector to the main board. 2.Place the Thermal Module onto the main board. Then first tighten the three captive screws marked 1, 2, 3 on the thermal module in order: 1-2-3. First tighten Screw 1, then screw 2, then screw 3. IMPORTANT: Incorrect order of screw replacement could harm the CPU. 3.The tighten the other two captive screws 1 2 3
Chapter 3105 Replacing the CRT Board 1.Connect the CRT board cable to the main board. 2.Connect the CRT board cable to the CRT board. 3.Align the CRT board cable carefully between the main board and the CRT board and stick down the attached tape of the cable.
106Chapter 3 Replacing the Main Board 1.Slide the main board external connector edge in first to the lower case. 2.Replace the five screws to secure the mainboard to the lower cover. Screw List StepScrewQuantityScrew Type Main Board Assembly 2x3 5
108Chapter 3 Replacing the I/O Card 1.Place the I/O card into the lower case edge first. 2.Replace the two screws. Screw List StepScrewQuantityScrew Type I/O Card Assembly 2x3 2
Chapter 3109 3.Connect the I/O card FCC to the I/O board. 4.Connect the I/O card FCC to the main board. 5.Lock the I/O Card FCC on the main board.
11 0Chapter 3 Replacing the Bluetooth Module 1.Connect the Bluetooth module cable to the Bluetooth module. 2.Apply adhesive and place the Bluetooth module into place pressing down firmly. 3.Connect the Bluetooth module cable to the main board.