Acer Aspire 1810t Service Guide

							Chapter 3111
Replacing the LED Board
1.Connect the LED board FCC to the mainboard.
2.Place the LED board into place ensuring the slide switches on the front are properly aligned in the lower 
cover slots. 
3.Replace the one screw. 
						

							11 2Chapter 3
Screw List
4.Connect the LED board FCC to LED board.
StepScrewQuantityScrew Type
LED Board Assembly M2*3 1 
						

							Chapter 311 3
Replacing the LCD Module
1.Place the LCD module hinges into position on the lower case.
2.Replace the two screws.
Screw List
StepScrewQuantityScrew Type
LCD Module Assembly M2x5 2 
						

							11 4Chapter 3
3.Reconnect the LCD module connector.
4.Press the adhesive plastic tape of the LCD module connector down firmly.
5.Relay the WLAN and 3M module cables around and through the lower case. 
						

							Chapter 311 5
Replacing the Button Board
1.Apply adhesive and stick the touch pad FCC down onto the upper cover.
2.Connect the touch pad FCC to the touch pad.
3.Place the button board onto the upper cover and replace the two screws. 
						

							11 6Chapter 3
Screw List
4.Connect the touch pad FCC to the button board.
5.Bring the button board FCC through the upper cover.
StepScrewQuantityScrew Type
Button Board 
AssemblyM2-0.4*2 2 
						

							Chapter 311 7
6.Lay the button board FCC down carefully on the upper cover.
7.Connect the button board FCC to the button board. 
						

							11 8Chapter 3
Replacing the Upper Cover
1.Place the upper cover onto the lower cover aligning the hinges first and then press down around the 
edges.
2.Replace the twelve screws. 
						

							Chapter 311 9
Screw List 
3.Turn the computer over, put on the bottom cover and lay out the WLAN card and 3M module cables 
around and through the bottom cover. 
StepSizeQuantityScrew Type
Upper Cover 
AssemblyM2*2.5 3 (blue call out)
M2*3 3 (green call out)
M2*5 6 (red call out) 
						

							120Chapter 3
4.Place adhesive tape over the 3M module cables.
5.Replace the bottom cover twelve screws.
Screw List 
6.Turn the computer back over and connect the button board FCC to the main board.
StepSizeQuantityScrew Type
Upper Cover 
AssemblyM2*5 12