Acer Aspire 1810t Service Guide
Have a look at the manual Acer Aspire 1810t Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 351 5.Pull the memory module out. 6.Repeat steps 4. and 5. for the second memory module.
52Chapter 3 Removing the WLAN Module 1.See “Removing the Battery Pack” on page 45.. 2.Loosen the four captive screws in the memory cover. 3.Lift and remove the memory cover. 4.Detach the two cables from the Wireless LAN module. IMPORTANT:Take note of the Main (1. black) and Auxiliary (2. white) connectors.
Chapter 353 5.Remove the one screw. Ensure the cables are well clear of the module Screw List 6.Pull the WLAN module out and away. StepScrewQuantityScrew Type WAN Module Disassembly2*3 1
54Chapter 3 Main Unit Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration. Main Unit Disassembly Flowchart Remove External Modules bef ore proceeding Remove Mainboard Remove LCD Module Remove Keyboard Remove Upper Cover Remove Thermal Module Remove Bluetooth Module Remove Speaker Module Remove I/O Board Remove RTC Battery Remove LED Board Remove Button Board Remove CRT Board
Chapter 355 Screw List StepScrewQuantityPart No. Remove Upper Cover M2*2.5 3 86.SA107.002 M2*3 3 86.SA107.001 M2*5 18 86.TG607.004 Remove Button Board M2-0.4*2 2 86.W4107.002 Remove LCD Module 2*5 2 86.TG607.004 Remove LED Board M2*3 1 86.SA107.001 Remove I/O Board M2*3 2 86.SA107.001 Remove Mainboard M2*3 5 86.SA107.001 Remove Speaker ModuleM2*3 4 86.SA107.001
56Chapter 3 Removing the Keyboard IMPORTANT: The keyboard is easily warped or damaged during the removal process. Take care not to use excessive force when removing to prevent damage. 1.See “Removing the Battery Pack” on page 45. 2.See “Removing the Hard Disk Drive Module” on page 47. 3.See “Removing the DIMM Module” on page 50. 4.See “Removing the WLAN Module” on page 52. 5.Using the plastic pry, press in the four latches along the top of the keyboard to release the keyboard from the cover. NOTE: The keyboard will spring up slightly when all retaining clips are unlocked.
Chapter 357 6.Using the plastic pry, lift up the top edge of the keyboard and then lift the keyboard up. 7.Flip the keyboard over. a.Unlock the FCCb.Pull the keyboard away a b
58Chapter 3 Removing the Upper Cover 1.See “Removing the Keyboard” on page 56. 2.Disconnect the button board FCC from the main board by unlocking the FCC cable and pulling away. 3.Remove the twelve screws in the upper cover. Screw List StepSizeQuantityScrew Type Upper Cover DisassemblyM2*2.5 3 (blue call out) M2*3 3 (green call out) M2*5 6 (red call out)
Chapter 359 4.Turn the computer over and remove the twelve screws in the bottom cover. Screw List 5.Pull off the tape from the 3M module cables. StepSizeQuantityScrew Type Upper Cover DisassemblyM2*5 12
60Chapter 3 6.Pull the 3M module and WLAN cables away from the computer. NOTE: Replace the plastic caps over the 3M module cable connectors immediately if they get dislodged during the process. 7.Turn the computer over and grasp the upper cover by the hinges. Then pull the upper cover up and away from the computer.