Adam Equipment AE Indicators AE402REVB1 User Manual

19 | P a g e              © Adam Equipment Company 2010  
6.8.1 ANIMAL WEIGHING PROCEDURE     With  the platform empty  the display  will  show  zero w eight.   Place  containers 
or blankets onto the platform and press the  [Z/T] key to zero the display.   The 
scale  may  go  into  the  animal  (dynamic)  weighing  pro cedure  when  the  items 
are  placed  on  the  scale  but  will  return  to  showing  zero  when  the  [Z/T] key  is 
pressed.     
 
  Place the animal or sample to be weighed on the...

20 | P a g e              © Adam Equipment Company 2010  
 
7.0  USER PARAMETERS 
Pressing  the  [Func/C]  key during  normal  operation  allows  the  user  to  access  the 
parameters for customizing the scale. The parameter s are split into 4 groups-  
  
1. Check weighing parameters,   
2. Percent and Animal Weighing Functions  
3. RS-232 parameters and  
4. Scale parameters   
  When  [Func/C]  is  pressed,  display  will  first  show  “FunC 1” for  Check  weighing 
parameters.  
 
  Press  either...

21 | P a g e              © Adam Equipment Company 2010  
  
Parameter  Description  Options  Default setting 
F1  Lo Set Low limit.    Use  the 
[Unit/


]  key 
and  [Pcs/ 


]  key  to  set 
the  values  of  the  lower 
limit.  
When  set  press  the  [Z/T] 
key  to  store  the  value  
and go to  F2 Hi 
  000000 
F2  Hi 
Set High limit.    Use  the 
[Unit/


]  key 
and  [Pcs/ 


]  key  to  set 
the  values  of  the  high 
limit.  
When  set  press  the  [Z/T] 
key  to  store  the...

22 | P a g e              © Adam Equipment Company 2010  
    Press  [Print/M+/Esc]  to  return  to  the  group  “FUnC  2”.  If  you  press  
[Print/M+/Esc]  again,  the  scale  will  exit  the  User  Parameter  secti on  and 
return to weighing. 
    
Parameter  Description  Options  Default  setting 
P1   PCt   This  parameter  allows  the  
user  to  enter  the  Percent 
weighing  Function.  See 
Section 6.7.    None  Enabled 
always 
P2 AnL Enter  the  Animal  Weighing  
mode  of  operation,  See...

23 | P a g e              © Adam Equipment Company 2010  
C3 PrM Printing  Mode-  
Manual, Continuous or  
Automatic  mAn
,  
Cont 
(not  on  EC 
approved scales) 
AUto     mAn
 
C4 Aon  Enable  or  disable  the  
Accumulation   AC on
  
AC oFF   AC on
 
C5 Ln  Select Language 
EnGLi (English)   
FrEnCH  (French)  
GErmAn  (German)      
SPAn  (Spanish)   EnGLi 
 
C6  UId  Set User ID  To  be  entered 
manually  000000 
C7   Sid 
Set Scale ID  To  be  entered 
manually  000000 
  
Scale will perform the...

24 | P a g e              © Adam Equipment Company 2010  
This group of parameters is used to control the operation of the scale.   
  
Parameter  Description  Options  Default   setting 
S1  Un Enable or disable weighing  
units,  will  not  allow  to 
disable  all  units,  at  least 
one  has  to  be  enabled. 
Parts  counting  can  be  
enabled/disabled    Kg  
Grams   
lb  
oz 
lb:oz 
N (Newtons)  
PCS Kg     
 
S2  bL  Backlight set to always on,  
always off or automatic on 
whenever  a  weight  is...

25 | P a g e              © Adam Equipment Company 2010  
 
8.0  BATTERY OPERATION 
 
  The scales can be operated from  the  battery  if  desi red.  The battery  life 
can  be  up  to  70  hours  depending  on  the  load  cells  u sed  and  how  the 
backlight is used.  
 
  When the battery needs charging a symbol on the dis play will show less 
bars  in  the  battery  symbol.      The  battery  should  be   charged  when  only 
the battery outline is on.  Once the bars have been  turned off the...

26 | P a g e              © Adam Equipment Company 2010  
31
2
4
      
9.0  RS-232 INTERFACE 
   
The  AE  402  indicator  is  supplied  with  bi-directiona l  RS-232  interface  as  standard. 
The  scale  when  connected  to  a  printer  or  computer  o utputs  the  weight  with  the 
selected weighing unit through the RS-232 interface . 
  Specifications: 
                    
  RS-232 serial interface is a plug as figure 2 shows : 
 
  
    1: Pin GND,   Signal Ground 2: Pin RXD,    Received Data...

27 | P a g e              © Adam Equipment Company 2010  
  
Data Format-Normal Output:  
Only  weight  value  along  with  the  weighing  unit  is  printed.    If  Percent  weighing  is 
used then % is shown in place of weighing units.   
Data Format-Parts Counting Output: 
Weight, Unit weight and number of parts are printed.  
 
 
  
Date           12/09/2006   
Time           14:56:27     
 
Scale ID    123456    
User ID    234567    
  
Net Wt.        1.234 Kg           Net Wt. (or Gross Wt.) 
Unit...

28 | P a g e              © Adam Equipment Company 2010  
  
Data Format- Memory Recall Output:  
 
Data Format- Continuous Output- Normal weighing:   
 
  
Data Format- Continuous Output- Parts Counting: 
 
 
NOTE: 
1. The  accumulated  total  will  not  be  sent  to  the  RS-23 2  when  the  continuous 
print is turned on.   
  2. The continuous print will only be for the current w eight and the display data.  
  3. In other languages the format is the same but the t ext will be in the language...